ölçü aracı ve kontrolör

Adapters for detectors and other accessories.

The chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems.

• Robust insulation with light refractory bricks
• Deep furnace chamber with three-sides heating: from both side walls and bottom
• Low energy consumption due to multi-layer insulation
• Base frame included
• N 7/H - N 17/HR designed as table-top model
• Parallel guided downward swinging door (user protected from heat radiation)
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
• Equipped with the B 500 programmable controller (with touch panel, 5 programmes with 4 segments each), optionally available with the C 540 controller

Extremely versatile vacuum controller for the laboratory.

No configuration required. Just connect and the CVC 3000 will identify all apparatus with VACUU·BUS^® VACUUBRAND pumps, vacuum valves, cooling water valves, external sensors, etc. Intuitive menu guidance via graphics display with analogue and digital vacuum readout. Demand-related control of process vacuum, cooling water and venting. Integral sensor made of highly resistant, alumina ceramic provides reliable absolute-pressure measurement. Boiling-point monitoring facility for evaporations*. No more searching for data or data input. Preset for many common vacuum applications, e.g. vacuum ovens, filtration.

The combination of speed controlled VARIO^® chemistry diaphragm pumps and the new VACUU·SELECT vacuum controller makes the VARIO^® select chemistry pumps the ideal solution for chemical processes that require precise vacuum, such as rotary evaporation, vacuum drying or vacuum concentration.

• High chemical resistance and therefore ideally suited for pumping aggressive gases and vapours.
• Short process times and smooth running due to optimal setting of the pressure via the VACUU·SELECT controller.
• The VARIO^® technology controls the vacuum precisely and efficiently via motor speed.
• Power consumption, maintenance and noise are exceptionally low.
• The outlet catchpot and solvent condenser combine to prevent solvent vapor emissions into the lab, allowing for nearly full recovery of solvents.

For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.

• With integrated sensor
• Selectable measuring units: µm, inch (mil)
• Battery operation
• Data interface RS-232

For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.

• Selectable measuring units: µm, ml
• Auto-Power-Off
• Battery operation
• Data interface RS-232

For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.

• LCD display, backlit
• Scan mode allows continuous measurement or single point measuring mode
• Mini Statistics Kit: displays the measured result, the average value and the max and the min value
• Internal memory up to 99 values
• Selectable measuring units: µm, inch (mil)
• Data interface RS-232