Isıtma olmadan, motorlu

With brown graduations. Sterilisable up to 134 °C.

• In accordance with ISO 7864 and DIN 13097
• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Minimal pain upon puncture
• Transparent Luer-Lock plastic hub
• Made of Polypropylene (needle hub)
• Box of 100 pieces

With cemented needle (N, NR). NR stands for syringes with Rheodyne specified needles. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts. Needle length 51 mm.

Three-part syringe with cylinder, plunger and sealing ring.

• Cylinder, PP
• Plunger, PP
• Lubricant silicone oil
• Latex free
• PVC free
• Sterile
• Individually packed

Made of soda limeglass. With centre glass or metal luer nozzle (Luer or Luer-Lock). Only plungers and barrels with identical lot numbers are interchangeable (between identical capacity syringes). Autoclavable up to +134 °C. The amber graduation is acid and alkali resistant. Only for technical purposes.

With cemented-in needles (N) for autosamplers Agilent 7673 - 7683, 6850 ALS and with fixed needle (FN) for CTC GC PAL instruments.

Syringe types with special needle (SN) available on request.

With PTFE plunger seal. Gastight microlitre syringes with cemented-in needles (N). Needle length: 51 mm

Glass barrel with PTFE-coated plunger. Gas-tight microlitre syringes with removable needle (RN). Gaseous samples can be safely and conveniently transported and stored in sample lock (SL) syringes. Needle length: 51 mm

Glass barrel with PTFE-coated plunger and seal, and Luer lock outlet (TLL). With UNC female thread. Allows attachment to drive arm mechanisms, e.g. Microlab 500 Series diluters/dispensers. Gas-tight microlitre syringe without needle. TLLX= Plunger stop fitted to prevent damage to the PTFE seal. Prevents the plunger tip from reaching the end of the syringe.

With removable needles (RN), or luer tip (LT). Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts.

The end of the plunger has a tungsten wire extension that fits the entire length of the needle all the way to the tip, resulting in a zero dead volume syringe.

With PTFE plunger seal. Gastight microlitre syringes with cemented-in needles (N). Needle length: 51 mm

Glass barrel with PTFE-coated plunger. Gas-tight microlitre syringes with removable needle (RN). Needle length: 51 mm

Removable. With Luer tip made of Kel-F. All hypodermic needles available according to specification in 10 mm to max. 1000 mm lengths. Further point styles and diameters available on request. Needle length: 51 mm

Removable. Not for use in HPLC applications.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.

The reusable borosilicate glass syringes offer superior chemical and heat shock resistance. A precious, low cost alternative to disposable plastic syringes, complementing the self-refilling models in many applications.

• Precision-machined plunger and barrel,
• Excellent fitting and liquid tightness (not gas tight)
• Permanent, high visibility graduations
• Autoclavable at 121 °C / 250 °F

Clear glass, with calibrated cylinder.
With chemically-resistant, diffused amber stain graduations.

Clear glass, with calibrated cylinder.
With chemically-resistant, diffused amber stain graduations.

HD syringe: High Dynamic plunger has been optimised for higher throughput in the headspace technique.
Novel metal spring allows working with enhanced tightness over a large temperature range. Which results in increased accuracy and reproducibility of your headspace GC analysis.

HDHT syringe: Unique cement-free snap-on connection. The syringe is chemically inert and temperature stable up to 200 °C which broadens the range of possible applications.

Made from neutral glass, with steel piston. Brown graduation, acid and alkali resistant. With centered Luer-slip/Luer-lock. May only be used for technical purposes. Autoclavable up to 200 °C.

Syringes for CTC Analytics CombiPal and GC PAL.

• High reproducibility, low carry-over
• For Thermo TriPlus

With fixed needles (FN).

Removable. For use with Rheodyne valves and Valco system VSF 2. Fit Hamilton syringes from 5 to 100µl or 250 to 1000µl capacity.