Mini santrifüj

Compact and reasonably priced mini centrifuges with two rotor types. Speed can be adjusted to 4000 rpm or 6000 rpm. Powerful motor for fast starting. Quick stop when the lid is opened.

LLG-uniCFUGE 2 with Universal rotor for 6 x 1.5/2.0 ml and 6 x 0.5 ml tubes and 2 times 8 x 0.2 ml PCR-stripes.

LLG-uniCFUGE 2/5 wth rotor for 4 x 5 ml tubes.

Scope of supply: Centrifuge, mains cable

Fixed angle rotor with lid, made of aluminium for 12 x 1.5/2 ml tubes with optimised aerodynamics which minimize heat and noise during operation. Operation in RPM or RCF mode possible by simple switching. Short-Spin mode with selectable RZB and RPM values. Large LCD (3.9") display with intuitive interface. Integrated imbalance-detection with automatic shutdown. Wide suction feet provide a stable base. The centrifuge can be controlled via computer by using the included software that can store up to 99 user-defined programmes. Operational record output to Excel.

The following types of vessel can be used:
12 x 0.2 ml PCR tubes
12 x 0.5 ml centrifuge tubes
12 x 1.5 ml centrifuge tubes
12 x 2.0 ml centrifuge tubes

Scope of supply: Centrifuge with rotor for 12 x 1.5/2 ml tubes, power supply with USB cable, 12 Adapters for 0.5 ml tubes, 12 Adapters for 0.2 ml tubes, Allen wrench with T handle, Software CD

Optional:

• Rotor for 16 x 0.2 ml tubes or 2 x 8 PCR-stripes (Cat. No. 6.263 535)

This compact Mini centrifuge offers versatility, simplicity, safety and ease of usage in just one package and is specially suitable for microfiltration, cell separations and spin down applications.

• Easy rotor change via magnetic fixing
• Microprocessor controlled regulation for load-independent accuracy and integrated imbalance control
• Brushless and non-wearing high-efficiency motor
• Digital display
• Integrated timer: 1 ... 25 min, continuous
• Starts and stops in seconds
• Electronic safety brake on lid opening for user safety
• Lid safety interlock
• Smooth and silent, discreet running

The new LLG-uniCFUGE 6 is equipped with a combi rotor. This allows centrifugation of up to 4 x 50 ml or 8 x 15 ml vessels. The lid opens automatically on run completion.

• Easy switching between RPM and RCF operating mode
• Integrated imbalance detection with automatic switch-off
• Timer setting from 1 minute to 99 minutes or continuous operation
• Enhanced airflow design for extremely quiet performance and temperature control
• Brushless, wear-free motor
• Compact and lightweight design
• 3 years warranty

New SnapSpin™ rotors - a new approach to compact centrifuge use!
Introducing the next generation of the Sprout^® mini-centrifuge loaded with new features for increased efficiency in the lab. Two new SnapSpin rotors (a six-place standard rotor and an eight-place strip rotor) snap-in and out for fast and easy changes! Plus, two sets of adapters accommodate all major microtube and PCR^® tube styles (2.0, 1.5, 0.5, 0.2 mL) for customized use. The Sprout is ideal for microfilter cell separations and HPLC samples. With most spins lasting around 20 seconds, the ergonomically designed lid is specifically designed to fit in the palm of your hand for easy repeat opening and use. Made with UV resistant plastic.
Operation is now faster and easier: Snap in rotor, load and close. For repeated spins, simply close the lid to reactivate. An internal safety switch ensures the Sprout will not operate without the lid open.
Small size offers minimal benchtop space and removable cord for compact storage.

• Low noise and vibration
• Small size
• Quick Spin feature for short spins
• Numbered tube positions
• Unit will not operate without lid in place
• Larger lid to accommodate longer and skirted tubes and taller tube lids
• Power Adapter with power cords for worldwide usage

• Two easy change, tool-free rotors. 1. Circular, one-size rotor for six 1.5- and 2.0ml tubes or use with adapters to spin six 0.5ml tubes. 2. Strip rotor for two 8 x 0.2ml PCR tube strips or 16 x individual 0.2ml PCR tubes. Six 0.2 mL and six 0.5 mL adapters for customized use
• Storage Case, PP - Keeps rotors and adapters contained and dust-free
• Tube Rack, PP - Convenient for handling samples before and after quick spins. For 16 x 2.0 / 1.5ml micro centrifuge tubes (diam. 12mm)
• 4 replacement lid o-rings

Once sample area is loaded and the lid is closed, the rotor rapidly accelerates to 6000 rpm. Ideal for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations.

• Quick release rotor system, no tools needed to exchange rotors
• Electronic braking, for rapid deceleration
• Dual lid switch
• Compact, rugged design

The powerful and user-friendly MiniSpin^® and MiniSpin^® plus microcentrifuges are extremely compact and have a small footprint. Depending on your needs, you can choose between two models. MiniSpin^® plus provides the speed required for molecular biology separations.

• Especially quiet due to its carefully balanced drive
• Maintenance-free motor
• Clear digital display
• Minimal sample heating (after 20min. at max. speed only 12°C max. )
• Separate short-spin button
• Automatic lid opening
• Integral power supply unit
• Capacity: 12 x 1.5 / 2ml containers
• Autoclavable rotor (121°C, 20min.)
• Start-up / slow-down time less than 13 secs. (to / from max. speed).

• Includes standard anodised aluminium rotor
• Timer can be set for up to 30 minutes

• Includes "Black Line" aluminium rotor
• Speed/rcf display switch
• Timer can be set for up to 99 minutes
• Permanent centrifuging option

The Prism™ Mini can be used for a wide range of molecular biology separations and quick spins. The centrifuge was designed to be extremely compact with an exceptionally small footprint. It includes 2 quick release interchangeable rotors, which spin up to 6000 rpm's. The electronic brake and self opening lid allow for quick deceleration to reduce handling time. The Prism™ Mini's maintenance-free drive is remarkably quiet and the unique design allows for excellent airflow, to protect temperature sensitive samples.

• Quick release rotor exchange
• Increased sample capacity
• Rapid sample processing
• One-step sample retrieval

Mini-centrifuge for all applications which do not require high speeds, e.g. micro-filtrations and cell separation. Transparent cover allows constant observation of centrifuge. The mini-centrifuge can be used for both PCR-vessels and PCR-strips. As a safety feature, the centrifuge will run only when the lid is closed. Lid opens easily with the press of a button.

• Fixed speed of 6000rpm
• Digital timer adjustable from 1 to 99min
• Integrated quick stop
• Fast start-up of speed
• Compact design and quiet operation
• Rotor exchangeable without tools
• Easy operation with touch keypad

These centrifuges are used with e.g. rotors for Eppendorf Tubes^® and PCR strips, rotors for microplates and 15 / 50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes^® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).

Microcentrifuge 5430

• 48 place centrifuge for 1.5ml / 2.0ml micro test tubes, 6 x 50 ml Falcon^® tubes or 2 x MTP plates
• Automatic rotor identification
• 12 different rotors (available as accessories)
• Stores up to 50 routine programs
• Menu guided operation in 4 different languages
• LCD display with backlighting
• Automatic lid opening following application sequence (only 5430)

• Temp. range: -11°C to +40°C
• +4°C at max. speed with all rotors
• Continues cooling after the centrifugation process
• Fast Temp for achieving required temperature in shortest possible time
• Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time

The CVP-2 enables the simultaneous sample preparation of multiple samples at one time. Versatile through being able to hold non-, semi- and fully-skirted PCR plates with no additional accessories required.

• Centrifuge and vortex mixer combined for significant time saving
• Independent vortex and centrifuge timers with up to 999 cycles
• Adjustable rpm or 4 programmable presets
• Consistent preparation of up to 192 samples continuously

Combined centrifuge/vortex mixer for microtubes and 0.2ml strips. For independent centrifuge and vortex mixing operations, or a programmable sequence of spin and mix phases of multiple tubes.

• Vortex mixing intensity: three stage adjustment (soft, medium and hard)
• Interchangeable rotors for 2.0ml, 1.5ml, 0.5ml, 0.2ml microtube combinations and 0.2ml strips
• Timed vortex mixing: 1sec to 20sec
• Supplied with 2 rotors: 12 x 1.5/2.0ml and 12 x 0.5ml plus 12 x 0.2ml

Combined centrifuge/vortex mixer for microtubes and 0.2 ml strips. For independent centrifuge and vortex mixing, or mixing of an individual tube concurrently with spinning of multiple tubes. The vortex cup, located at the top of the central shaft, emerges through an opening in the closed lid. In spin-mix-spin applications, the Combispin can be used with very low reagent volumes.

• Continuous operation or short spin
• Further rotors on option: 8 x 1.5/2.0 ml + 8 x 0.5 ml microtubes or 6 x 1.5/2.0 ml + 6 x 0.2 ml microtubes or 2 x 8-well 0.2 ml stripes

Compact high-speed benchtop micro centrifuge with a built-in rotor for 12 x 1.5/2ml
microtubes. Ideal for biomedical laboratories.

• Fixed angular aluminium rotor accommodates 12 x 1.5/2 ml microtubes, supplied with 12 adapters for 0.2ml and 0.5ml tubes and fixing lid (rotor autoclavable, lid not autoclavable)
• Timed operation (1 to 30 minutes), with automatic switch-off
• Suitable to use in cold rooms, operating temperature ambient 4°C to 25°C
• Metal protective inserts inside the lid and casing, automatic imbalance switch-off and locking of a lid provide safe operation
• Constant airflow around the rotor reduces risk of samples overheating during centrifugation
• Simple push-buttons and a clear 2-line LCD status display shows actual and set values of time, set and actual speed and relative centrifugal force (g-force)
• Low voltage cord easily fits through refrigerator or workstation door gaskets
• Compact design and quiet in operation
• Fits neatly and unobtrusively into the workspace

Microlitre centrifuge for microtubes up to 2.0ml.

Features:

• Brushless, induction motor
• Steplessly adjustable speed range: 1000rpm to 14000rpm
• Timer pre-selection from 1 min. to 30 min. with "continuous run" facility
• "quick" pulse button for short time runs
• Constructed to IEC 1010 requirements

The powerful and user-friendly MiniSpin^® and MiniSpin^® plus microcentrifuges are extremely compact and have a small footprint. Depending on your needs, you can choose between two models. MiniSpin^® plus provides the speed required for molecular biology separations.

• Especially quiet due to its carefully balanced drive
• Maintenance-free motor
• Clear digital display
• Minimal sample heating (after 20min. at max. speed only 12°C max. )
• Separate short-spin button
• Automatic lid opening
• Integral power supply unit
• Capacity: 12 x 1.5 / 2ml containers
• Autoclavable rotor (121°C, 20min.)
• Start-up / slow-down time less than 13 secs. (to / from max. speed).

• Includes standard anodised aluminium rotor
• Timer can be set for up to 30 minutes

• Includes "Black Line" aluminium rotor
• Speed/rcf display switch
• Timer can be set for up to 99 minutes
• Permanent centrifuging option

The MagFuge^®combines a High-Speed Centrifuge and a Magnetic Stirrer in one unit.

MagFuge^® Centrifuge:

• Maximum speed and flexibility
• Comfortable and easy to use
• Safety stop when lid is open, rotor is jammed, or the unit is out of balance
• Ideal for most protocols requiring fast spins, and appropriate for PCR, microfilter cell separation, and HPLC protocols
• Timer: 30 s ... 60 min in 5 s increments

• Stirring capacity: 3 l
• Max. speed: 500 ... 12500 rpm
• Dimensions stirring plate (diam.): 130 mm

• Powerful magnetic coupling ensures consistent accurate alignment of the stir bar
• With Silicone mat for stirrer lid to prevent spills and to keep vessels stable
• With low voltage, double insulated Power adapter to keep the unit cool and ensuring sample integrity

Bring increased efficiency and user comfort to your lab with Thermo Scientific™ mySPIN™ mini centrifuges. Tool-free rotors and quick-spin options make them fast and easy to use. Benefit from a compact footprint that fits into your workstation and ergnonomic design that stands out. Ideal for microfilter cell separation and HPLC protocols.

• Compact footprint
• Easy operation
• Quiet operation, low vibration
• Tool-free, quick rotor exchange
• Quick-spin feature

• Palm-shaped lid for left- or right-handed users
• Quick tube extraction

Non-refrigerated microcentrifuge for common standard applications with a high sample throughput, providing ergonomic comfort and great flexibility with its 6 rotor options.

• Fast acceleration and deceleration (10 acceleration and braking ramps)
• Lower noise level (< 51 dB)
• Small footprint
• Low loading height for comfortable insertion ofrotor and samples
• Soft touch one-finger closure for ergonomic operation
• Automatic lid opening after running
• Rotor chamber made of stainless steel

These centrifuges combine a high capacity and versatility. Its main swing-bucket rotor holds both conical tubes and plates, no need to change rotor buckets or adapters. The 5910 R centrifuge has a low access height for easy operation. The 5910 R centrifuge holds standard 1 liter Nalgene^® bottles.

• Plate rotor options for centrifugation of all types of MTP, PCR or Deepwell Plates
• Fixed-angle rotors for high-speed molecular biology applications in tubes from 0.2 to 50 ml
• Aerosol-tight Eppendorf QuickLock^® caps and lids allow fast and ergonomic lid locking
• Quiet operation (<59 db)
• Compact footprint
• Automatic rotor recognition and imbalance detection
• FastTemp function for quick pre-cooling and FastTemp pro^® function for automatic precooling based on pre-programmable time and date
• Standby cooling function holds temperature when centrifuge is not in use
• ECO shut-off engages after 8 hours (adjustable)

Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.

• Backlit, two-lined LCD display
• Powerfull brushless induction motor
• 10 acceleration and deceleration rates
• Memory for up to 99 parameters
• Lid locking system
• Imbalance sensor
• Small footprint
• Timer: 10 s to 99 h 59 min 59 s, continuous

Powerful and easy-to-use mini-centrifuge for easy and quick life science separation applications.

• One-touch operation
• Quiet brushless motor
• Vibration absorbing rubber pad
• Automatic safety shutdown when opening the lid
• Imbalance detection

Bring increased efficiency and user comfort to your lab with Thermo Scientific™ mySPIN™ mini centrifuges. Tool-free rotors and quick-spin options make them fast and easy to use. Benefit from a compact footprint that fits into your workstation and ergnonomic design that stands out. Ideal for microfilter cell separation and HPLC protocols.

• Compact footprint
• Easy operation
• Quiet operation, low vibration
• Tool-free, quick rotor exchange
• Quick-spin feature

• Imbalance and tilt safety cut-out
• Safety interlock lid designed to prevent opening while rotor is turning
• Ability to perform fast spins with higher RCF requirements
• Back-lit, customizable display that can be set for rpm or RCF

Easy to operate. Excellent results.
Vortex shaker suitable for intermittent operation activated by pressing shaker attachment, or for continuous operation.

• strong, quiet motor drive
• speed control from 20 to 3000rpm
• suction cups on base to minimize movement
• optional tube adapter and flask accessory
• optional adapters to expand the usability of the mixer