BOD

Winkler pattern. Soda-lime glass.
For determination of dissolved oxygen in water. The measured capacity is specified to ± 0,01ml. With white labelling area. Solid, bevelled glass stopper, secured with an accessory spring clip. Each bottle is adjusted to the relevant stopper. Stoppers and bottles are therefore not interchangeable. Each bottle and its stopper is marked with a unique, matching identification number.

Karlsruher BOD bottle with NS19 conical ground joint.

The special bottle neck of the Karlsruhe bottles absorbs the water which is displaced by the stopper of the electrode. This construction guarantees clean working and ensures at the same time that the test results are not adulterated by unwanted entry of oxygen into the samples.

Alternative Clamps for oxygen determination bottles acc. to Winkler

BOD measurement is an important measurement of the effects of domestic and industrial waste water on sewage plants and outflow points. The sensor system BD 600 is a 6 sample system that allows precise measurements of BOD based on the manometric principle. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Due to the modern integral pressure sensors, it is not necessary to use mercury for the measurements. The BOD values are stored automatically in the sensor memory at regular intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/ SD card or transferred via USB cable to evaluate the data on a computer. The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days - and manometric determination of OECD, for example, generally takes place over a period of 28 days.

Scope of supply:

• BD 600, complete unit with 6 or 12* sensor heads and control unit with batteries
• Power supply unit incl. Y-cable for common power supply of BD 600 and stirring unit
• Inductive stirring unit
• 6 or 12* sample bottles
• 6 or 12* rubber gaskets
• 6 or 12* magnetic stirring rods
• 1 overflow flask, 157 ml
• 1 overflow flask, 428 ml
• 1 bottle, 50 ml potassium hydroxide solution
• 1 bottle, 50 ml nitrification inhibitor solution
• 1 instruction manual
• remote control

Specifications
Measuring principle:	respirometric, electronic pressure sensor
Ranges:	0 - 40, 0 - 80, 0 - 200, 0 - 400, 0 - 800, 0 - 2000, 0 - 4000 mg/l O2
Measurement period:	User-selectable, between 1 and 28 days
Power supply:	100-240 V, battery buffered or via power supply using Y-cable
Protection class:	IP 54 (sensor head)
Interface:	USB host port (USB stick), USB device port (computer), SD card
Clock:	Real time
Application:	BOD5 / BODF / OECD301F

The incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.

• Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °C
• Low power consumption
• Illuminated LED display of preset and current temperatures
• With natural refrigerant R600a
• Ideal for BOD determination at 20 °C
• Power sockets inside the incubator

Alternative Thermostatic cabinets TC, with glass door

OxiTop^®-IDS wireless measuring head with Bluetooth^® LE technology for operation with Multi 3620 IDS or Multi 3630 IDS. For routine BOD readings also operable without IDS multiparameter instrument. OxiTop^®-IDS/B with enhanced pressure range up to 1.5 bar and H₂S resistant pressure sensor for biogas measurement.

• Memory for 360 measuring points
• 3 operating buttons
• Backlit graphic LCD
• Control LED
• Volume pre-selection
• For routine BOD readings measurement duration selectable (1 to 7 days)
• Display of measuring curve
• Display of current readings
• Intermediate values available

Accessories Wireless module for WTW® measuring instruments Alternative Measuring heads OxiTop®-i

Measuring systems for the reliable determination of 90 to 999 ppm BOD. Complete with sensor heads and multi-position magnetic stirrer.

• The sensor heads are screwed directly onto the BOD bottles
• Automatic storage of 5 results in 24-hour intervals
• Measured readings in mg/l (ppm) can be read directly on the sensor at any time
• Protected against splashing water (IP 54)

Scope of supply BOD sensor system 6: 6-position magnetic stirrer, each 6 BOD sensors incl. batteries, 500 ml brown glass bottles, KOH reservoirs and magnetic stirring rods
Scope of supply BOD sensor system 10: 10-position magnetic stirrer, each 10 BOD sensors incl. batteries, 500 ml brown glass bottles, KOH reservoirs and magnetic stirring rods

Specifications
BOD range:	90 ... 999 ppm
Display:	LED (3 digits)
IP code:	IP 54

Accessories

With NS 19 cone glass stopper.

With vent, level display and stopcock. Blue solid-coloured (for light protection). Additional lid for easier cleaning.

VD series: With distributor frits and compressed air connection without cooling coil.
VDT series: With distribution frits and compressed air connection, with internal stainless steel cooling coil and connection for recirculation thermostat. 2x connections inlet / outlet cooling water: 2x ¾" with screwed on ½" connection with nozzle approx. 13 mm. Third connection for ventilation with 6 mm nozzle.

BOD measurement system for all types of respirometric measurements, e.g. soil respiration, microbiological activity measurement, biogas determination as well as extended BOD measurement for the industrial waste water plants and further degradation tests in 3 selectable measuring types, BOD standard, BOD special and pressure.
With the proven Bluetooth^® connectivity and the convenient operation via MultiLine^® multi parameter instrument Multi 3620 IDS or Multi 3630 IDS. Using a Multi 3620 IDS or Multi 3630 IDS in BOD special mode the BOD measuring range extends to 400000 mg/l. For an already existing Multi 3620 or 3630 IDS, a firmware update is sufficient. Herewith beneath the OxiTop^® applications also measurement of pH, conductivity, solved oxygen and turbidity are available. All heads can be used independently for routine BOD measurements from 1 to 7 days.

• Bluetooth^®connectivity
• Direct calculation of all results in the meter
• Representation of curves for monitoring
• Parallel measurement of different examinations and methods
• Export to data acquisition programs

These tests quantify the biological degradability of chemicals. The OxiTop^®-IDS A12 is also suited for high dilutions.

• Respirometric degradability tests according to OECD 301F/DIN EN ISO 9408
• Versatile measurement by using the BOD special mode

Scope of supply:
OxiTop^®-IDS Set 6: 6 x OxiTop^®-IDS measuring heads, 6 x bottles PF600 (510 ml), 6 x rubber sleeves, nitrification inhibitor, overflow measuring flask , 6 x magnetic stirring bars, stirring bar retriever, stirring platform IS 6
OxiTop^®-IDS Set 12: 12 x OxiTop^®-IDS measuring heads, 12 x bottles PF600 (510 ml), 12 x rubber sleeves, nitrification inhibitor, overflow measuring flask, 12 x magnetic stirring bars, stirring bar retriever, stirring platform IS 12
Erweiterungssatz für OxiTop^®-IDS 6/12: 6 resp.12 OxiTop^®-IDS measuring heads, 6 resp.12 bottles, universal power adapter, 6 resp.12 rubber sleeves, 6 resp.12 magnetic stirring bars, stirring platform IS 6 resp. IS 12
OxiTop^®-IDS A6: 6 x OxiTop^®-IDS measuring heads, 6 x bottles PF45/1000 (1000 ml), 6 x adapter OxiTop^® AD/SK, nitrification inhibitor, 6 x magnetic stirring bars, stirring bar retriever, stirring platform IS 6-Var
OxiTop^®-IDS A12: 12 x OxiTop^®-IDS measuring heads, 12 x bottles PF45/250 (250 ml), 12 x adapter OxiTop^® AD/SK, nitrification inhibitor, 12 x magnetic stirring bars, stirring bar retriever, stirring platform IS 12

Please order CO₂ absorber NHP 600 (9.303 403) separately.
The IDS multi parameter measuring instruments Multi 3620 IDS Set WL or Multi 3630 IDS Set WL are required. Please order separately.

Specifications
Pressure range:	500 ... 1250 hPa
BOD range:	0 ... 4000 mg/l
Measurement period:	0,5 h ... 180 d
Memory:	360 values
Display:	LCD

Accessories Multi parameter measuring instruments Multi 3620/3630 IDS SET WL for BSB measuring system OxiTop® IDS Accessories Wireless measuring heads OxiTop® IDS Accessories Wireless module for WTW® measuring instruments Accessories Stirring platforms OxiTop® for BOD measurement Accessories Sample bottles for BOD measurement system OxiTop® Alternative BOD Measuring system OxiTop®-IDS for determination of soil respiration Alternative  Alternative BOD measurement system OxiTop®-i IS 6 / 12

Menu-operated measuring heads. Output of the BOD measurement values directly on the display.

• 3 operating buttons
• Backlit graphic LCD
• Control LED
• Volume pre-selection
• Measurement duration selectable (1 to 7 days)
• Display of measuring curve
• Display of current readings

Professional, digital multi-parameter measuring instument for mobile measurement, with 2 or 3 universal measuring channels, radio-ready, color graphic display, data logger and USB interfaces. Also for controlling OxiTop^® IDS.

Scope of supply: Instrument, short manual, CD-ROM, rechargeable batteries, driver software for USB, cable, power supply, protection SM Pro, IDS WLM-M module

Easy-to-use, respirometric measuring system for determining the biological oxygen demand (BOD). The method is based on changes of pressure in a closed system using measuring heads attached to the sample bottles. The BOD can be determined simultaneously in up to 6 or 12 samples.

• No dilution of the sample required
• Direct reading of the BOD, the time course and the intermediate values on the graphical display of the measuring heads
• Input of the used sample volume directly at the measuring head
• Monitoring time between 1 and 7 days
• Permanent display of the current status at each measuring head
• Coloured measuring heads with adjustable, numerical sample identification

Scope of supply: OxiTop^®-i IS 6: 6 x measuring heads (3 x blue, 3 x grey), 6 x sample bottles PF600, 6 x rubber quivers, overflow measurement flasks, 6 x stirring rods, stirring rod remover, stirring platform SI 6
OxiTop^®-i IS 12: 12 x measuring heads (6 x blue, 6 x grey), 12 x sample bottles PF600, 12 x rubber quivers, overflow measurement flasks, 12 x stirring rods, stirring rod remover, stirring platform SI 12

An incubator is required to operate the OxiTop^®-i IS. Please order separately.

Specifications
Pressure range:	500 ... 1250 hPa
BOD range:	0 ... 4000 mg/l
Display:	Graphical LCD, background-illuminated
Power supply of measuring heads: Power supply of stirring platform:	1 x CR 2450 100 ... 240 V, 50/60 Hz

Accessories Measuring heads OxiTop®-i Accessories Stirring platforms OxiTop® for BOD measurement Accessories Accessories for B.O.D. Auto-Check Measurement Systems OxiTop® Alternative BOD measuring system OxiTop®-IDS for determination of aerobic degradation Alternative BOD Measuring system OxiTop®-IDS for determination of soil respiration Alternative

BOD measurement system for all types of respirometric measurements, e.g. soil respiration, microbiological activity measurement, biogas determination as well as extended BOD measurement for the industrial waste water plants and further degradation tests in 3 selectable measuring types, BOD standard, BOD special and pressure.
With the proven Bluetooth^® connectivity and the convenient operation via MultiLine^® multi parameter instrument Multi 3620 IDS or Multi 3630 IDS. Using a Multi 3620 IDS or Multi 3630 IDS in BOD special mode the BOD measuring range extends to 400000 mg/l. For an already existing Multi 3620 or 3630 IDS, a firmware update is sufficient. Herewith beneath the OxiTop^® applications also measurement of pH, conductivity, solved oxygen and turbidity are available. All heads can be used independently for routine BOD measurements from 1 to 7 days.

• Bluetooth^®connectivity
• Direct calculation of all results in the meter
• Representation of curves for monitoring
• Parallel measurement of different examinations and methods
• Export to data acquisition programs

Respirometric measuring system for 6 measuring heads for determination of aerobic soil respiration, OxiTop^®-IDS B6M-2.5 acc. to AT4 guideline. These sets are suitable for forecast, survey and monitoring of clean-up operations as well as measurement of bio-degradation of pesticides, fungicides, insecticides and fertilizers for example.

Scope of supply:
OxiTop^®-IDS B6: 6 measuring heads, 6 sample bottles PF45/500 (500 ml), 6 adapters OxiTop^® AD/SK
OxiTop^®-IDS B6M: as OxiTop^®-IDS B6, but with 6 vessels MG 1,0 (1000 ml)
OxiTop^®-IDS B6M-2.5: as OxiTop^®-IDS B6M, but with 6 vessels MG 2,5 (2500 ml) and Soda-Lime CO₂ absorbent

Please order CO₂ absorber NHP 600 (9.303 403) separately.
The IDS multi parameter measuring instruments Multi 3620 IDS Set WL or Multi 3630 IDS Set WL are required. Please order separately.

Specifications
Pressure range:	500 ... 1250 hPa
BOD range:	0 ... 4000 mg/l
Measurement period:	0,5 h ... 180 d
Memory:	360 values
Display:	LCD

Accessories Multi parameter measuring instruments Multi 3620/3630 IDS SET WL for BSB measuring system OxiTop® IDS Accessories Wireless measuring heads OxiTop® IDS Accessories Wireless module for WTW® measuring instruments Accessories Stirring platforms OxiTop® for BOD measurement Accessories Sample bottles for BOD measurement system OxiTop® Accessories Adapter AD/SK for BOD measuring system OxiTop® Accessories Measuring vessels for BOD measuring system OxiTop® Accessories Measuring bottles for BOD measurement system OxiTop® Alternative BOD measuring system OxiTop®-IDS for determination of aerobic degradation Alternative  Alternative BOD measurement system OxiTop®-i IS 6 / 12

Compact temperature cabinets with internal plugs for the use of OxiTop^® IS 12 stirring platforms. Models with insulation glass door allow for visual control of the OxiTop^® heads without opening the door.

• Incubation conforming to standards
• Suited for BOD, OECD 301F, soil respiration, anaerobic degradation
• Temperature adjustable in steps of 1 K between 10 and 40 °C
• Eco-friendly refrigerant R600a

Note: The necessary temperature constancy will only achieved in combination with the samples.

TS 608/2i: Model for standard applications, with 2 internal plugs, incl. 2 shelves
TS 608-G/2i: As TS 608/2i, but with door made of insulation glass

Specifications
Temperature range:	10 ... 40 °C
Increment:	1 K
Temperature stability:	±0,5 K

The incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.

• Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °C
• Low power consumption
• Illuminated LED display of preset and current temperatures
• With natural refrigerant R600a
• Ideal for BOD determination at 20 °C
• Power sockets inside the incubator

Alternative Thermostatic cabinets TC, with steel door

For OxiTop^® measuring heads, for all sample and measuring bottles series PF45/.. and MF45/.., autoclavable (121 °C). Incl. OxiTop^® AD adapter, OxiTop^® SK screwable adapter, DI45 gasket for adapter VS45.

Iincl. 2 x nozzles, 2 x VS25 screwing sets for nozzle, 1 x GK 600 rubber sleeve, 2 x SEP25 septum for nozzle, 2 x STH25 support for nozzle

Incl. 1 x DV/MG lid adapter with rack, gasket, 2 x GK 600 rubber sleeves, 4 x DV/MG/KL clamps, 1 x MB 50 measuring beaker (50 ml)

Abmessungen außen (B x T x H):	467 x 435 x 1260 mm
Abmessungen innen (B x T x H):	560 x 570 x 1480 mm
Innenraumvolumen:	220 l
Netzanschluss:	230 V / 50 Hz

Alternative Measuring vessels for BOD measuring system OxiTop®

A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.