Bunsen bekleri

The white LABSOLUTE® gas lighter with aluminium shaft is characterized by simple and safe handling. It can be used not only to light gas burners in laboratories. The lighter stands out with an adjustable flame with Piezo ignition, a safety lock and a window to see the gas filling level easily. Due to the integrated eyelet, the LABSOLUTE® lighter can be stored quickly and is within reach at all times. The lighter is already filled and includes a protection cap.

Simple power supply through the electrical connector with an integrated switch for power on / off, no dangerous gas supply and gas leakage.

• Electrical power supply instead of gas
• Fast heat up without a flame
• Highest security operated through an RCD: suitable for education
• No waste and storage of gas cartridges
• Continuous power regulation through the optional power regulator
• Heat protection through the optional glass support: deposition for dishes and flasks
• Improved heat protection with an improved glass support
• Clean odorless working in regular atmosphere without a flame

The components need to be ordered separately.

Specifications
Power supply:	590W / 230V
Dimensions (diam. x H):	125 x 180mm
Weight:	800g
Max. temperature:	900°C
Heated area:	diam. 38mm

Accessories Gas cartridges Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper

Tripod bracket for mounting the PowerCube into a tripod stand. With stainless steel rod approx. 13cm long.

Power controller LR1 for continuous energy regulation between 0 to 100 %. Stand mounting device for fitting the Power Cube onto a retort stand. Stainless steel retort rod for attachment directly to the back of the casing, length approx. 13cm.

DIN 30665. Air regulation, low flame.

Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners

DIN 30665. Air regulation, pilot flame.

Rubber sucker base (Art. Nr. 9.018 360) please order separately.

Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners

With needle valve DIN 30665. Air regulation, pilot flame, max. 1300°C. An anti-slip rubber coating under the base ensures absolute stability.

For operation with gas cartridge C 206 GLS (Cat.-No.: 9.018 520). DVGW-authorised.

Weight:	380g without cartridge
Height:	200mm with cartridge
Consumption:	55g/h

Accessories Gas cartridges Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burner, portable, Labogaz® 470

For operation with gas cartridges CV 300 Plus (Cat.-No.: 6.243 905) or CV 470 Plus (Cat.-No.: 9.018 512).

Weight:	380 g without cartridge
Height:	190 mm with cartridge CV 300 Plus 240 mm with cartridge CV 470 Plus
Consumption:	55 g/h

Accessories Gas cartridges Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burner, portable Labogaz® 206 Alternative Flame sterilizer / Blowlamp Soudogaz® X 2000 / X 2000 PZ

Bunsen burner with needle valve DIN (NG-2411 BO0031).

Accessories Gas cartridge Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burners with air regulator and needle valve

Bunsen burner with needle valve and pilot flame DIN (NG-2411 BO0031).

Accessories Gas cartridge Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burners with air regulator and needle valve

With air regulator and needle gas valve. Adjustable nozzle.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners

DIN 30665. Air regulation, spar flame.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Bunsen burners with air regulator and needle valve

DIN 30665. Air regulation.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Bunsen burners with air regulator and needle valve

Electrothermal's Electric Bunsen combines the advantages of a regular gas burner with the clean, easy operation of their electric mantles. The Electric Bunsen is ideal for non-contact heating of test tubes, crucibles, small flasks, and beakers, regardless of their shape.

• Conical shaped heating element directs radiant heat to the top cavity
• Top cowl deflects heat away from your hand
• Air circulation from the vented housing keeps the base cool enough to hold during operation
• Corrosion-resistant

Without controller. Please order separately.

Accessories Analogue heating contollers CN-200

Electrothermal's Electric Bunsen combines the advantages of a regular gas burner with the clean, easy operation of their electric mantles. The Electric Bunsen is ideal for non-contact heating of test tubes, crucibles, small flasks, and beakers, regardless of their shape.

• Conical shaped heating element directs radiant heat to the top cavity
• Top cowl deflects heat away from your hand
• Air circulation from the vented housing keeps the base cool enough to hold during operation
• Corrosion-resistant

-With controller CN-200

Specifications
Power consumption:	400W
Dimensions (diam. x H):	120 x 177mm
Weight:	0.5kg
Temperture range:	800 to 1000°C

Air volume regulation for stepless adjustment of flame size. For operation with gas cartridge C 206 GLS
With durable housing to protect the cartridge.

• For flaming and sterilizing
• Mobile hand-held device
• One-hand operation possible

Weight:	380 g without cartridge
Consumption:	120 g/h
Flame temperature:	approx. 1750 °C

Mobile device for scarfing and flame-sterilising. With piezoelectric-ignition and gas supply control to create a soft or sharp flame. Infinite adjustment of the flame. Highest operational safety. In short-term use, the flame is activated as long as the push button is pressed. For continuous operation with lock key.

schuett easyflame to use with propane/butane gas
1. Suitable with gas cartridges with 7/16" connection thread, e.g. CG 1750, Express 444, AT 2000.
2. Adapters for CV 360 or CP 250 gas cartridges optional.

schuett easyflame^plus for connecting natural gas and propane / butane gas with gas safety hoses
1. Natural gas hose for central gas supply for easy plugging the device (hose barb included)
2. Propane / butane gas hose with fitting (1/4 "-left-hand thread) for the use of gas cartridge adapters or gas cylinders with pressure reducer. Matching adapters C 206 and CV 300/470 (already equipped with gas safety hose, 0.5m and reducer). Gas safety tubing in other lengths on request.

Specifications
Dimensions (W x D x H):	260 x 90 x 60mm
Weight:	approx. 350g

Accessories Adapters for gas cartridges

For all types of gas. Bow-shaped. With flint.

With heart screw. Thread M8.

Alternative Hook connector

Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.

• Heats up quickly, constant heating
• No open flames, no soot, odourless
• Integral continuous electronic power adjustment between 0% and 100%
• Casing safe to touch even when hot
• Built-in casing handles for safe transport
• Inert ceramic, long-life heating element
• Built-in overheat monitor
• Protection of electrical components against spilled liquids
• Additional side safety shield on burner element
• Includes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod

Specifications:
Connector:	800W / 230V
Dimensions (W x D x H):	150 x 150 x 170mm
Weight:	approx. 2.5kg
Max. temperature:	900°C
Heated area:	100 x 100mm

The PowerCube is suitable for all rapid, non-contact heating activities in laboratories, industry and education. Reagent bottles, flasks or dishes, depending on their size, can be placed directly on the support trivet over the heating element or attached to a stand mounting.

Advantages:

• Particularly safe as no open flame is used
• Stable thanks to practical cube shape. The casing itself only gets slightly hot in use
• Accelerated heating-up rate in comparison with other electrical heating devices
• Heating element sealed in ceramic, therefore insensitive to external influences (spillages)
• Low operational cost due to the long life heating element and low power consumption of only 200 W, in spite of high temperatures of 700°C

Specifications:
Heating power:	250 W
Overall (W x D x H):	100 x 105 x 105 mm
Weight:	approx. 700 g
Max. temperature:	700 °C
Heated area:	60 x 60 mm

Sterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.

• Sturdy and maintenance-free
• No gas, no open flame - Works with standard electrical power
• Intuitive, easy to use
• Instant, ready-to-use, no warm-up time, no waiting
• Sterilization temperature: 900 to 1300°C
• Touch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)
• For use in Laminar Flow Cabinets
• Ideal for mobile operation in the field

The schuett solaris is the perfect solution if an open flame should be avoided or gas cartridges etc. are not available. Used with standard electrical power. Reaches the safe working temperature of 900 to 1300°C within a split second. No excess heat, no energy consumption between work cycles. START is generated by an infra-red sensor, which allows for efficient one-handed operation. Pathogenic material is kept inside the sterilization chamber. No spreading, no splashing. Working angle adjustment (4-steps).

Scope of supply: schuett solaris inoculation loop sterilizer, 2 x quartz glass tubes, 1 x inoculation loop holder with inoculation loop (sample)

Specifications
Dimensions (W x D x H):	152 x 195 x 210mm
Weight:	approx. 2500g

With stopcock. Air regulation, max. 1300°C. An anti-slip rubber coating under the base ensures absolute stability.

Piezoelectric.

For sterilising, heating, flame sterilising. For use in every microbiological laboratory or in safety cabinets. Modern Bunsen burner with state-of-the-art safety features plus outstanding quality characteristics:

• Controlled burning time 1 sec to 120 min (selectable)
• Automatic safety shut-off (selectable)
• Overheating protection / burner control by sensors
• Precise economic flame regulation (stable flame in strong air current)
• Flame and ignition monitoring
• "Push-and-Twist" bayonet fixture for burner head, no tools needed for cleaning
• Tilting right or left

Operating status, safety notes and warnings pictures and full text (color display) written language for most international languages. Brilliant colour display. Unique Joy-Stick navigation. Operating modes: by hand or with foot pedal or motion sensor. Housing made of stainless steel and safety glass. UV- and solvent resistant. For case of cleaning and flame-sterilising. Suitable for use with natural gas (central gas) or butane/propane gas (gas cartridges). Integrated stand for tilting right or left. Safety standard acc. to DIN 30665 part 1, DIN-DVGW


schuett phoenix II eco: (with LED control lamp and foot-switch) Start flame by foot-switch or button (On/Off). Best suited for use in microbiological safety cabinets. Best price to performance ratio.
schuett phoenix II standard: (brilliant colour display, selection of native language, sensor and foot- switch) Start/Stop flame by activating sensor 1x or 2x, use foot switch or press button by hand. Continuous display of timer.
schuett phoenix II accu: (brilliant colour display, selection of native language, sensor and built-in extra heavy duty power cells) Start/stop flame by activating sensor 1x or 2x, use foot-switch or press button by hand. Continuous display of timer and battery power. Operates for up to 30 hours, intermittent use. Complete with battery charger for 3 hour recharging. Ideal for mobile usage.

Flame sterilization carousels semi- and fully automated: For precise and time-controlled flaming of different kinds of inoculating loops. Minimization of gas consumption, the life of the inoculating loops is significantly increased. The inoculating loop is placed into the carousel after use and is sterilized immediately after turning the holder in flaming position. Sterilization time infinitely adjustable. Designed for continuous work-flow with sample series in the Laminar Flow.

Semi-automated: schuett easyloop (for 6 Inoculating loop holders, included): Comfortable manual rotation,fully automated flaming process. For use with Safety Bunsen Burners schuett phoenix II standard and accu.
Sterilization time: 3 to 5 s (adjustable from 1 s to 120 min)
Fully automated: schuett flammy R (for 5 Inoculating loop holders, included): Fully automated rotation and inoculating. In combination with a standard gas-safety-burner (e.g. schuett phoenix II). Sterilization time: 2 to 10 s

Accessories Accessories for gas-safety burner schuett phoenix II Accessories Gas cartridges Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Adapters for gas cartridges

Maximum temperature 1300°C, with needle valve, thermo safety element (bimetallic flame sensor with magnetic lock), air regulator and pilot light. Nickel-plated brass and steel. An anti-slip rubber coating under the base ensures absolute stability.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Teclu burner, Ms-Ni

With wick height adjuster and sealing cap. Capacity approx. 60ml.

Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Spirit burner, 18/10 steel

With needle gas valve and air regulator.
Only for the gas cartridge 9.018 364.

Accessories Gas cartridge Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Alternative Bunsen burner for cartridge Alternative Teclu burner for cartridge Alternative Safety pilot burner with cartridge

With needle gas valve and air regulator.
Only for the gas cartridge 9.018 364.

Accessories Gas cartridge Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burner for cartridge Alternative Cartridge burner DIN type with cartridge Alternative Safety pilot burner with cartridge

With needle gas valve and air regulator.
Only for the gas cartridge 9.018 364.

Accessories Gas cartridge Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Alternative Teclu burner for cartridge Alternative Cartridge burner DIN type with cartridge Alternative Safety pilot burner with cartridge

With needle gas valve and air regulator.
Only for the gas cartridge 9.018 364.

Accessories Gas cartridge Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Alternative Bunsen burner for cartridge Alternative Cartridge burner DIN type with cartridge Alternative Teclu burner for cartridge

Nickel-plated brass and steel. DIN 30665. max. 1300°C, with needle valve, air regulator and pilot light. An anti-slip rubber coating under the base ensures absolute stability.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper

Teclu burner with stopcock and pilot flame DIN (NG-2411 BO0033)

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Teclu burner, Ms-Ni

DIN 30665. Air regulation, spar flame.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners Alternative Teclu burner, Ms-Ni

Acc. to DIN 30665, with air regulation, without low flame.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Teclu burner, Ms-Ni

Acc. to DIN 30665, with air regulation, with low flame.

Please order safety base (shown in image) separately.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners

DIN 30665. Ignition protection, thermocouple, air regulation, low flame.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners Alternative Teclu burner, Ms-Ni

Burners according to DIN 30665 cannot be switched off completely. A small flame remains burning even if needle valve or stop cock are turned off. The gas flow shall be disconnected by means of the central stop cock in the laboratory.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Bunsen burners Alternative Bunsen burners with air regulator and needle valve

For power control of heating mantles of the HM series, electric Bunsen burners and heating tapes. Each controller has two neon indicators: White neon "Power On" and amber neon "Mantle/Bunsen Heater On". When the control knob is turned clockwise, the power increases and the amber indicator light begins to pulse. As soon as the maximum power is reached, the lamp lights up continuously. There is a clamp on the rear of the controller for attaching a rod (Ø 12 mm).

With piezoelectric ignition device. For all types of gas.

Customize your water purification system with the Thermo Scientific™ Barnstead™ Easypure™ RoDi Accessories and Consumables that best suit your application. Cartridge kit includes pre-filter, ultrapure mixed bed cartridge and Easypure high purity/low TOC cartridge.

For metallic gas cartridges according to DIN EN 417:2012. Outside thread M 10 x 1.

• Volume 150 ml
• Adjustable

DIN type. With thread connection, ignition protection, thermocouple, G1/4 left-hand thread, air regulation, pilot flame and needle valve. Burnerhead Ø 17 mm

Accessories Tubing Connection for Teclu burners with thread connection Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners

Other connection threads available.

With round ceramic centre.