Evrensel, kurutma dolabları, Isıtma dolabları,

Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uniOVEN 42 and uniOVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uniOVEN 42 and 10 for uniOVEN 110 with a distance of 40 mm between shelves.

• Quick and intuitive operation
• Microprocessor control with integrated auto-diagnostic system
• Forced convection with fan
• Digital display for time and temperature
• Timer: 1 minute to 99.9 h and continuous
• Delayed start timer: 1 minute to 99.9 h
• Outlet for vapour exhaustion
• Acoustical and visible information for end of program
• Acoustical and optical alarm at temperature differences
• Interior made of stainless steel
• Adjustable over temperature protection at 300 °C
• Temperature accuracy: ±1 °C (at 70 °C)
• Temperature uniformity: ±2 °C (at 70 °C)

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• High temperature accuracy thanks to APT.line™ technology
• Electromechanical control of the exhaust air flap
• Chambers up to 115 l are stackable
• Ergonomic handle design
• USB connection for data recording
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

• Controller with LCD display

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.

• Electronically adjustable ventilation
• Key lock function
• Timer from 1 minute up to 100 days
• Adjustable temperature limit
• USB Interface
• For up to 6 shelves
• Interior made of stainless steel
• Door opening possible up to max. 180°

• Recirculating air drying cabinet with automatic fan switch-off
• Recirculating air adjustable in 10 steps
• Real-time clock
• Temperature selection limited TWB (DIN 12880)
• Illuminated interior
• Cable bushing at the rear for measurings inside the oven
• RS 232 Interface
• Direct saving of data on USB stick
• Interface for additional temperature sensor (display and control possible)
• 2 large TFT Displays

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening
• APT.line™ preheating chamber technology
• Adjustable exhaust air flap
• Controller with timer function
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.
-Forced air circulation


TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. With corrosion and condensate-free stainless steel interior for homogeneous temperature and humidity conditions.

• Electronically controlled APT.line™ preheating chamber with cooling system
• Inner chamber made completely of stainless steel
• 2 stainless steel racks incl. shelf support
• Intuitive touchscreen controller with time segment and real-time programming with internal measured value recording
• Humidity control with capacitive humidity sensor and vapor humidification
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible alarm
• Access port with silicone plug diam. 30mm, left side
• LCD display for indication of temperature, humidity, alarms and additional information
• Internal data logger with USB interface
• Independent water supply via canisters
• Models from 240 l capacity with double swivel castors and brake

For long-term stable temperature/humidity simulations in one chamber. The constant climate chambers are ideal for norm-compliant work according to ICH guidelines and work independently of the water supply.

KBF Series: Constant climate chambers with large temperature range: 0 °C to 70 °C and humidity range: 10 % RH to 80 % RH.
KMF Series: Ideal for demanding stress tests, e.g. at 85 °C and 85 % RH. Temperature range: -10 °C to 100 °C and humidity range 10 % RH to 98 % RH.

Equipment:

• Electronically controlled APT.line™ preheating chamber with cooling system
• Inner chamber made of stainless steel
• Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
• Humidity regulation with capacitive humidity sensor and vapor humidification
• Inner glass door with seal
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarm
• Avoidance of glass corrosion by special TIMELESS coating
• Access port with silicone plug diam. 30mm, left side
• Door heating
• Ethernet interface for communication software APT-COM™ DataControlSystem
• Internal data logger, measured values can be read out in open format via USB
• Power supply 200 ... 230 V, 50/60 Hz

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• High temperature accuracy thanks to APT.line™ technology
• Electromechanical control of the exhaust air flap
• Chambers up to 115 l are stackable
• Ergonomic handle design
• USB connection for data recording
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

• Controller with LCD display and enhanced timer functions
• Adjustable fan speed
• Ethernet interface

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• High temperature accuracy thanks to APT.line™ technology
• Electromechanical control of the exhaust air flap
• Chambers up to 115 l are stackable
• Ergonomic handle design
• USB connection for data recording
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

• Controller with LCD display

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• Uniform drying conditions thanks to APT.line™ preheating chamber technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Adjustable exhaust air flap
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

• Controller with timer functions

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• Uniform drying conditions thanks to APT.line™ preheating chamber technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Adjustable exhaust air flap
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

• Controller with timer functions

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• Uniform drying conditions thanks to APT.line™ preheating chamber technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Adjustable exhaust air flap
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

• Controller with expanded timer functions
• Adjustable fan speed
• RS 422 interface

Robust, space-saving, low-profile ovens with mechanical and adjustable chamber ventilation.

• Uniform drying conditions thanks to APT.line™ technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Outstanding thermal insulation
• Hydraulic thermostat temperature control
• Adjustable exhaust air flap
• Timer 0 to 120 min
• 2 chrome-plated racks

Full-sight glass door (4-layer insulating glass) temperature-range up to max. 250°C, for UN, UNplus, UF, UFplus series.

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under a protective gas atmosphere, vacuum, or even with flammable gasses.

• Tmax 1600 °C, 1700 °C or 1800 °C
• MoSi2 heating elements, mounted vertically for easy replacement
• Insulation with vacuum-formed ceramic fibre plates
• Rectangular outer housing with slots for convection cooling
• Models RHTV with hinges for wall mounting
• Housing made of sheets of textured stainless steel
• Ceramic working tube made of material C 799 incl. fibre plugs operation under air
• Type B thermocouple
• Switchgear separate from furnace in separate floor standing cabinet
• Switchgear with control unit
• Possible controller variants are the programmable B 500, C 550 and P 570 (threes) with adjustable ramps and hold times.
• Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the oven and load
• Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
• Standard power supply 400 V 3/N/PE 50/60 Hz

• Charge control with temperature measurement in the working tube and in the oven chamber behind the tube
• Alternative working tubes designed for process requirements
• Display of inner tube temperature with additional thermocouple
• Gas-tight flanges for protective gas and vacuum operation
• Manual or automatic gas supply system
• Three- or five-zone control for optimization of temperature uniformity
• Check valve at gas outlet avoids intrusion of false air

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.

• Electronically adjustable ventilation
• Key lock function
• Timer from 1 minute up to 100 days
• Adjustable temperature limit
• USB Interface
• For up to 6 shelves
• Interior made of stainless steel
• Door opening possible up to max. 180°

• Recirculating air drying cabinet with automatic fan switch-off
• Recirculating air adjustable in 10 steps
• Real-time clock
• Temperature selection limited TWB (DIN 12880)
• Illuminated interior
• Cable bushing at the rear for measurings inside the oven
• RS 232 Interface
• Direct saving of data on USB stick
• Interface for additional temperature sensor (display and control possible)
• 2 large TFT Displays

The Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.

• Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clock
• Highest level of temperature uniformity
• Exceptionally low energy consumption
• Adjustable fan speed for application related airflow
• Programmable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)
• Access port allows the introduction of sensors for independent data monitoring
• A simple calibration routine ensures temperature accuracy over time
• Boost function enables rapid heating up
• Auto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)
• Standard overtemperature alarm and an additional undertemperature alarm
• Door lock prevents disruption, tampering or accidental opening
• Door alarm notifies the operator when door is left open accidentally
• Socket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mind

The Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.

• Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clock
• Highest level of temperature uniformity
• Exceptionally low energy consumption
• Adjustable fan speed for application related airflow
• Programmable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)
• Access port allows the introduction of sensors for independent data monitoring
• A simple calibration routine ensures temperature accuracy over time
• Boost function enables rapid heating up
• Auto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)
• Standard overtemperature alarm and an additional undertemperature alarm
• Door lock prevents disruption, tampering or accidental opening
• Door alarm notifies the operator when door is left open accidentally
• Socket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mind

The Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.

• Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clock
• Highest level of temperature uniformity
• Exceptionally low energy consumption
• Adjustable fan speed for application related airflow
• Programmable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)
• Access port allows the introduction of sensors for independent data monitoring
• A simple calibration routine ensures temperature accuracy over time
• Boost function enables rapid heating up
• Auto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)
• Standard overtemperature alarm and an additional undertemperature alarm
• Door lock prevents disruption, tampering or accidental opening
• Door alarm notifies the operator when door is left open accidentally
• Socket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mind

The Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.

• Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clock
• Highest level of temperature uniformity
• Exceptionally low energy consumption
• Adjustable fan speed for application related airflow
• Programmable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)
• Access port allows the introduction of sensors for independent data monitoring
• A simple calibration routine ensures temperature accuracy over time
• Boost function enables rapid heating up
• Auto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)
• Standard overtemperature alarm and an additional undertemperature alarm
• Door lock prevents disruption, tampering or accidental opening
• Door alarm notifies the operator when door is left open accidentally
• Socket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mind

As well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.

• Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clock
• Highest level of temperature uniformity
• Exceptionally low energy consumption
• Adjustable fan speed for application related airflow
• Programmable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)
• Access port allows the introduction of sensors for independent data monitoring
• A simple calibration routine ensures temperature accuracy over time
• Boost function enables rapid heating up