Su jeti pompaları

This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning.

With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.
Comprises: Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.

Nickel-plated brass, non-return valve, with connection for quick coupling.

Nickel-plated brass, non-return valve, with female connection to water tap.

Non-return valve, standard design, no removable parts, material: borosilicate glass 3.3

For generating a vacuum. Connects directly to a standard faucet via the 3/8" NPT threaded connection. Operates at low water pressure for minimal water consumption.

• Built-in check valve
• Includes 12 cm PE tubing

With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3

Matt chrome-plated brass and plastic.
For low pressure.
Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.