Örnek konteynerler

Ideal for liquid specimen collection, transportation and storage.

• Ideally suited for liquid histological samples
• Container made of non-cytotoxic polypropylene
• Very solid quality
• Top and bottom gripping assures easy opening and closing when wearing gloves
• Half-transparency containers
• With graduation
• With label
• Leak proof

• Sterile, solid bags for the homogenisation of liquids and solids
• With and without labelling strips

Whirl-Pak^® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.

Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.

All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.

Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.
Temperature range -210 to 82 °C.
Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.

For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.

• With white screw caps made of PP
• Liner Material metal foil
• Made of WHEATON 180 low potassium borosilicate glass
• High ultraviolet transmission

• Stand-up bag with bottom gusset
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Very good barrier properties against water vapor and oxygen
• Opaque
• Protection against the influence of UV radiation
• Temperature range: -40 °C ... 90 °C

Scaled sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. After sampling, the container can be closed and is leakproof. DispoDipper is completely manufactured in one piece and can be used for sampling and subsequent transport of the sample in one device. In this way, cross-contamination or sample impurities are almost impossible. For sampling, first remove the cover at the predetermined breaking point. Then take the sample with the sample container and close it securely. After sampling, the handle at the predetermined breaking point can be detached from the sample container. This allows for easy and space-saving transport of the sample.

• Individually packaged and optionally sterilised by gamma rays (SteriPlast^®)
• Production and packaging according to clean room class 7
• Complies with EU food requirements and FDA regulations