Test kabinleri

Accessories Perforated stainless steel shelf Accessories Options and Accessories Climatic Test Chamber CTC / TTC (see next page) Accessories Special equipment for Memmert Universal, Heating and Drying ovens

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.

Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).

Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.

Standard equipment
Ventilation and Control:

• high-performance air fan in working chamber
• depending on operation status automatically variable fan speed with manual adjustment from 10% to 100%
• adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
• autodiagnostic system with fault indication on temperature and humidity control
• 2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting
• integral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• digital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setup
• digital display of set values (resolution: 0.1°C below 99.9°C, 0.5°C above 100°C) and actual values (resolution: 0.1°C) of temperature (LED)
• long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentation
• USB interface including Memmert "Celsius" software for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for -20°C and +160°C

Heating concept:

• high-performance ring heaters with optimised air circulation
• door heating to avoid condensate

Cooling Concept

• twin compressor
• speed adjustable condenser fan
• refrigerant R404A

Multiple Overtemperature Protection

• with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tank
• independently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3
• additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance range
• mechanical temperature limiter TB class 1 switching the heating off at approx.10°C above max. oven temperature

Temperature range:
CTC/TTC: without humidity control: from -42°C up to +190°C
CTC: with humidity control: from +10°C up to +95°C
Power supply 400 V, 3ph, N, 50 Hz
Standards for CTC additionally:

• Electronically controlled active humidification and dehumidification from 10% to 98% rh with digital display of the relative humidity, display resolution 0.5%, setting accuracy 1%
• incl. works calibration certificate for +30°C at 60% rh
• Humidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over
• 2 x 10L tanks acting as condensate collectors, on telescopic slide mounts

Accessories Options and Accessories Climatic Test Chamber CTC / TTC (see next page)

For long-term stable temperature/humidity simulations in one chamber. The constant climate chambers are ideal for norm-compliant work according to ICH guidelines and work independently of the water supply.

KBF Series: Constant climate chambers with large temperature range: 0 °C to 70 °C and humidity range: 10 % RH to 80 % RH.
KMF Series: Ideal for demanding stress tests, e.g. at 85 °C and 85 % RH. Temperature range: -10 °C to 100 °C and humidity range 10 % RH to 98 % RH.

Equipment:

• Electronically controlled APT.line™ preheating chamber with cooling system
• Inner chamber made of stainless steel
• Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
• Humidity regulation with capacitive humidity sensor and vapor humidification
• Inner glass door with seal
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarm
• Avoidance of glass corrosion by special TIMELESS coating
• Access port with silicone plug diam. 30mm, left side
• Door heating
• Ethernet interface for communication software APT-COM™ DataControlSystem
• Internal data logger, measured values can be read out in open format via USB
• Power supply 200 ... 230 V, 50/60 Hz

Accessories Shelves for BINDER chambers and incubators, stainless steel Accessories Racks for BINDER chambers and incubators, stainless steel Accessories Reinforced racks for BINDER chambers and incubators, stainless steel Alternative Constant climate chambers series KBF-S Solid.Line Alternative Constant climate chambers series KBF-S ECO Solid.Line

The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.
The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.

Model variant TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Specifications
Setting range active humidity control:	20 to 95 % rh
Setting accurate humidity:	0.5 % rh
Working temperature range:	at least 7 °C above ambient up to +90 °C
Setting temperature range:	+18 °C to +90 °C
Setting accurate temperature:	0.1 °C
Power supply:	230 V, 50/60 Hz

Light module cold white 6.500 K: LED strips arranged on the side walls of the interior, 10 for model 110; 14 for models 260, 410 and 750; programme controlled dimming from 0 to 100 % (in 1 % steps); ramp programming in combination with temperature and humidity

Light module cold white 6.500 K + warm white 2.700 K: LED light strips - 10 strips for model 110; 14 strips for model 260, 410 and 750 (5 resp. 7 alternating cold white light strips and 5 resp. 7 warm white light strips); on the side walls of the interior, programme controlled dimming from 0 to 100 % (in 1 % steps); ramp programming in combination with temperature and humidity

Accessories Stainless steel grid Accessories Perforated stainless steel shelf

Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.

• Homogeneous climate even with full load
• Electronically controlled APT.line™ preheating chamber technology
• Temperatures up to 28 °C below ambient temperature possible
• Inner chamber made completely of stainless steel
• 2 stainless steel grids incl. shelf support
• Access port with silicone plug Ø 30 mm, left side
• Unit self-test for comprehensive status analysis
• LCD display for indication of temperature, humidity, alarms and additional information
• Internal data logger with USB interface
• Independent water supply via canisters

Humidity range:	10 ... 80 % rH
Temperature range:	0 ... 70 °C
Temperature fluctuation at 40 °C:	± 0.1 K

Accessories Shelves for BINDER chambers and incubators, stainless steel Accessories Racks for BINDER chambers and incubators, stainless steel Accessories Reinforced racks for BINDER chambers and incubators, stainless steel Accessories Feed-throughs for constant climate chambers KBF-S Alternative Constant climate chambers series KBF-S Solid.Line Alternative Constant climate chambers, KBF / KMF series

The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions. Specially designed for testing pharmaceutical products according to ICH, Q1A and Q1B, option 2, and similar global standards for stability tests of cosmetics and food.
Standard equipment :

• PID microprocessor control with integrated auto-diagnostic system
• Interior stainless steel 1.4301 (ASTM 304), deep-drawn
• Structured stainless steel housing, rear of zinc-plated steel
• High-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
• Internal data logger with a storage capacity of at least 10 years
• German, English, French, Spanish language settings available on the ControlCOCKPIT
• Digital backwards counter with target time setting adjustable between 1 minute and 99 days
• The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber
• Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidity
• Moisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopper

TwinDISPLAY: ControlCOCKPIT with two TFT colour displays

• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertime
• Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
• AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
• ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
• Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
• Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
• Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm

Climate chamber variants:
ICH climate chamber
ICH L climate chamber with light
ICH C climate chamber with CO₂ control

Specifications
Working-temperature range with humidity and/or light (ICH/ICH L) Working-temperature range without humidity (ICH)	+10 °C to +60 °C -10°C to +60°C
Working-temperature range without humidity Working-temperature range with and without humidity (ICH C)	0 °C to +60 °C +10°C to +50°C
Setting temperature range Setting temperature range ICH L Setting temperature range ICH C	-10 to +60 °C 0°C to +60°C +10 °C to +50°C
Setting accuracy temperature	0.1 °C
Adjustment range humidity	rh 10 to 80%
Setting accuracy humidity	0.5 % rh
Power supply	230 V 50/60 Hz; 115 V 50/60 Hz at extra cost

Accessories Options and accessories for constant climate chamber HPP