Membran filtreler

The LABSOLUTE® hand protector grip HeatGuard made of red silicone rubber is temperature-resistant from -50 - 250 °C and is the best protection for your hands against hot and cold surfaces. The two pockets for thumb and fingers fit every hand size. The nobs on the HeatGuard ensure that there is a safe, slip-resistant grip at all times. You can store the hand protector grip using one of the two eyelets.

5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm.

CRYOLITE is a fully waterproof glove to protect the hand and forearm in operations that involve the use of liquid nitrogen (or other cryogenic gases) and heat.
Made by materials specifically designated for this application, it keeps the hands warm and dry for long periods of use. Tested, with success, by contact with liquid nitrogen (-195.82 ° C) for one minute and following test of flexibility (RCT method). Suitable for contact with Liquid Oxygen (Oxygen Index O.I. 25,4 external layer - Test Report 166/2016 Dipartimento di Ingegneria Padova.
The multilayered construction allows a high level of thermal protection, flexibility and dexterity from -200 ° C to 250 ° C.
An inner lining made of soft polyester fleece protects against contact cold.
Pack of 1 pair.

Suitable for all work with liquid nitrogen and other cryogenic gases up to approx. minus 196 °C. Protects against cold and contact burns in case of leakage of liquid gas. The waterproof glove is made of a special elastic and laminated fabric.
Interior insulation: polyester multi-layer fabric ( 410 g / m² ) and polyolefin porelle membrane.
According to normative EN 511, EN 420, EN 388, Cat III. Warning: Not intended for immersion in liquid nitrogen or other liquid cryogens.
1 pair per pack

Alternative Heat- / Cold-resistant gloves Alternative Hand Protectors Hot Hand® Alternative Safety Gloves Clavies®, Heat Protection up to 232°C

Consisting of:

• 1 pair Cryo Gloves^® Standard, size: optional, see table
• 1 x face protection shield with adjustable head mounting
• 2 x safety labels, 300 mm diameter, entitled "Face protection" and "Wear gloves"
• 1 x protection apron, Cryo Apron^®, width: 610 mm, length: 1070 mm

• Thin, anatomically-shaped glove ensures dexterity
• Guaranteed without silicone
• Excellent abrasion resistance: longer lasting
• Dot embossing for better insulation and better grip
• Knitted wrist
• orange

Made of thick-walled silicone.
Safe, non-slip protection against very hot or cold surfaces.
Measures 10 x 19 cm with durable silicone rubber construction that remains flexible from -57 °C to +260 °C. End pockets accept thumb and fingers to grasp objects.
Mitts have multiple studs with concave tips thus providing secure grip on virtually all hot/cold surfaces.

Alternative Heat- / Cold-resistant gloves Alternative Protection Gloves Cryo Gloves® Waterproof shoulder length Alternative Safety Gloves Clavies®, Heat Protection up to 232°C

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.

Alternative Protection Gloves Cryo Gloves®Waterproof, wrist length with knitted cuff Alternative Protection Gloves Cryo Gloves® Standard, elbow length Alternative Protection Gloves Cryo Gloves® Standard, forearm length Alternative Protection Gloves Cryo Gloves® Standard, shoulder length Alternative Protection Gloves Cryo Gloves® Waterproof forearm length Alternative Protection Gloves Cryo Gloves® Waterproof, elbow length Alternative Protection Gloves Cryo Gloves® Waterproof shoulder length

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.
The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.

Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.
The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.

Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.
The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.

Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Attention: Not suitable for immersion in cryogenic liquids.
The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.

Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!

Alternative Heat- / Cold-resistant gloves Alternative Hand Protectors Hot Hand® Alternative Safety Gloves Clavies®, Heat Protection up to 232°C

Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice.

Alternative Heat- / Cold-resistant gloves Alternative Protection Gloves Cryo Gloves® Waterproof shoulder length

Very supple, offering excellent movement. Knitted construction, without seams. Temperature resistant up to 250 °C. 1 pair per pack. Cat. II

Alternative Heat- / Cold-resistant gloves

This coarse-knitted glove made of 100% Kevlar^® is lined with cotton, making it ideal for protecting the wearer against heat and cuts.
The combination of Kevlar^® and cotton guarantees good heat insulation and enables the handling of objects up to +250 °C without losing anything in terms of cut resistance. 1 pair per pack.

Characteristics:

• Very good protection against cut injuries
• Additional cotton cladding
• Comfortable to wear

Applications: metal processing, automotive industry, glass industry, foundries

Length:	220mm to 270mm
Colour:	yellow
EN:	388 (2 4 4 2 D), EN 407 (X 2 X X X X)

• 5-finger glove
• Made of aramide fabric with special insulation
• Usable on both sides
• Abrasion resistant
• 1 pair per pack

Length:	400mm
EN:	388, 407

• Mitten
• Up to +900 °C contact heat short term
• Made of aramide fabric with special insulation
• Usable on both sides
• Abrasion resistant

Length:	400 mm
EN:	388, 407

• Thin, anatomically-shaped glove ensures dexterity
• Excellent abrasion resistance: longer lasting
• Dot embossing for better insulation and better grip
• Cat. II

• 5-finger glove
• Protection against contact heat short term up to 1000 °C
• Made of aramide fabric with special insulation
• Usable on both sides
• Abrasion resistant

Length:	400mm
EN:	388, 407

5-finger glove made of KEVLAR® coarse knit with cotton insulation

• Soft
• Insulates
• Cut-resistant
• Washable

5-finger glove made of KEVLAR® coarse knit with cotton insulation

• Soft
• Insulates
• Cut-resistant
• Washable

Waterproof Cryo-Grip^® Gloves offer improved grip on small objects while protecting your hands and arms when working in hazardous, ultra-cold environments. Gloves are designed to provide a high level of thermal protection where the exposure to cryogenic fluids might exist. Made from state-of-the-art materials and a multi-layered construction, the gloves are designed to keep you dry and to wick moisture away from your hands, so you can work in comfort for extended periods of time and allows a maximum level of grip, dexterity, flexibility, and thermal protection - essential features when function is important and safety is critical.
1 pair per pack.

CAUTION: Not intended for immersion in liquid nitrogen or other liquid cryogens.

wrist length:	280 - 330 mm
forearm length:	335 - 395 mm
elbow length:	440 - 500 mm
shoulder length:	620 - 695 mm

Alternative Protection Gloves Cryo Gloves® Waterproof shoulder length