Davul pompalar

• Delivery tubes made of PP
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• For weak acids, alkalis and detergents

For rapid and clean emptying from cans, drums and small barrels up to 60 l.

• Medium-contacting parts made of PP, PE and FKM
• Precise dosing, without dripping
• Pump connection suitable for 64 mm dia. (BSI) container threads
• Stepless length adjustment of immersion tube
• Threaded adapters for most commercially-sold containers available
• Not suitable for HCl

• Delivery tubes made of PP
• For small containers, up to 10 l
• Universal bungs made of soft PVC, for container openings of 20 – 36 mm
• For weak acids, alkalis and detergents

• Delivery tubes made of PP
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• 1.5 m discharge tube, PVC
• Stopcock made of PP/PE

• Delivery tubes made of PVDF
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• For acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis

When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case....

Adapter set consisting of:

• 2'' Coarse thread, Mauser, green
• 2'' coarse thread, Tri-Sure^®, brown
• 2'' Fine thread steel drum, blue
• DIN 60, black
• DIN 51, black

Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle....

Stainless steel V2A and PTFE.
For safe dispensing of liquids with a low flash point . Electrostatic charge can be dissipated through accessories antistatic set and drum screwthread connection. Not suitable for acetone....

...