The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (XS, S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

Accessories Cover glasses, rectangular, thickness 1 (0.13 - 0.16 mm) Accessories Microscope slide folders, cardboard Accessories Microscope slide boxes, PS Accessories Staining jar acc. to Coplin Accessories Slide mailers Accessories Slide dispenser Alternative Microscope slides, ground edges Alternative Adhesion slides for tissue sections

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

With the exception of items 7691020, 7691022 & 7691034, the volumetric flasks have a scribed ring mark.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Alternative Volumetric flasks, class A, with hollow glass stopper, blue graduation Alternative Volumetric flasks, amber, class A, with PE stopper, white graduation Alternative Volumetric flasks, trapezoidal, class A, with PE stopper, blue graduation

The LABSOLUTE® folders are made of cardboard and available in two different sizes. The slides lie safely in recesses which feature thumb cuts for easy slide removal. The lid provides further protection against damage and contamination and a practicable overview of your preparations thanks to a printed index.

• For 20 or 30 microscope slides (76 x 26 mm)
• Available in black

Accessories Microscope slides, ground edges Accessories Microscope slides, cut edges Accessories Adhesion slides for tissue sections Alternative Microscope slide boxes, PS Alternative Slide mailers

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Septa made of natural rubber / butyl / TEF combine the good physical properties of natural rubber (resealability) and the good chemical properties of butyl (analytical cleanliness).

Accessories Crimp neck vials and micro-vials ND11, wide opening Accessories Snap ring vials and micro-vials ND11, wide opening Accessories Snap ring vials and micro-vials ND11, PMP or PP Accessories Crimping tools Accessories Decapping tools Accessories Crimping tools Accessories Decapping tools Accessories Crimping tool, pneumatic, manual Alternative With RedRubber / PTFE septa Alternative With butyl / PTFE septa Alternative With silicone / PTFE septa Alternative With aluminium septa

The LABSOLUTE® Skin Care 1 is a high-quality, easily absorbable, gently moisturising skincare cream containing natural oils and beeswax. The emulsion is silicone-free and is therefore also suitable for use within Hazard Analysis and Critical Control Points (HACCP) concepts. The product encourages skin regeneration and can also be used on the face.

For best effects, use regularly after washing your hands, on dry skin, or also while working in the laboratory or office. The cream is suitable for all skin types.

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

The 0.1-10 XL / 20 µl tips (7.695 841) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.
Bevelled tips (7.695 842 and 7.695 843): due to the bevelled end the contact surface of the pipetted liquid is reduced and less residual liquid remains at the tip.
Item 7.695 856 is delivered in a useful folded box.

Accessories Pipette tips boxes Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Accessories Racks for 5 ml and 10 ml pipette tips Accessories Pipette stand with dual bins for pipette tips, acrylic Alternative Pipette tips without aerosol barrier in racks, non-sterile Alternative Pipette tips without aerosol barrier in racks, sterile

The CHEMSOLUTE® pH indicator strips enable fast and accurate pH value determination. The range offers suitable products for a wide variety of pH value intervals.

• High accuracy and easy legibility
• Stable carrier strips with coloured test fields
• Non-bleeding, no contamination of the medium
• 100 strips per pack

Crimp neck vials and micro-vials ND11 made of clear and amber first hydrolytic class glass are used as standard in GC and HPLC. A large selection of micro-inserts is available for these vials.

Accessories Micro-inserts for vials with wide opening, glass Accessories Vial racks, acrylic Accessories Vial racks, PP Accessories ND8, ND9, ND10, ND11 - 81 positions Accessories With natural rubber / TEF septa Accessories With RedRubber / PTFE septa Accessories With butyl / PTFE septa Accessories With silicone / PTFE septa Accessories With aluminium septa Alternative Snap ring vials and micro-vials ND11, wide opening Alternative Snap ring vials and micro-vials ND11, PMP or PP Alternative Screw neck vials and micro-vials ND8, small opening Alternative Short thread vials and micro-vials ND9, wide opening Alternative Screw neck vials and micro-vials ND10, wide opening Alternative Kits ND11, crimp neck Alternative Vase vials Alternative Vials with directly closable micro-insert

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Alternative Wide-mouth bottles, natural, LDPE Alternative Wide-mouth bottles, amber, HDPE Alternative Wide-mouth bottles, natural, PP Alternative Narrow-mouth bottles, natural, HDPE

The LABSOLUTE® bouffant caps with a diameter of 52 cm and an elastic strap are made of soft and breathable PP fleece with a grammage of 10 g/m² only.

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN EN ISO 4797. Without stopper. Compatible with all stoppers with standard ground joint made of glass or plastic.

Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Accessories Stoppers, HDPE Alternative Erlenmeyer flasks, narrow-neck, borosilicate glass 3.3 Alternative Erlenmeyer flasks, wide-neck, borosilicate glass 3.3

The serological pipettes from LABSOLUTE® are ideal for working with sterile solutions in the millilitre range and applications in cell culture.

• With filter plug
• Free of DNase, RNase and pyrogens
• Non-cytotoxic
• Quick and easy identification by colour coding
• Gamma sterilized (SAL 10^-6)

The standard serological pipettes from LABSOLUTE® are individually packaged in an easy-to-open paper/plastic blister.

Accessories Pipette controller Accessories Safety pipette fillers, natural rubber Alternative Serological pipettes, short version, sterile, PS Alternative Graduated pipettes, class AS, type 3, amber graduation Alternative Serological pipettes, sterile, PS, bulk Alternative Demeter pipettes, sterile, PS

LABSOLUTE® offers a wide selection of membrane filters for microfiltration. You can choose between several membrane materials, diameters and pore sizes. Usage of membrane filters is recommended both for filtration of air and fluid and is optimally suited in particular for retention of very small particles. Precisely defined micro pores and exceeding stability - this combination makes it a good choice for applications in the microbiological sector, as well as in the pharmaceutical, food and water analysis industry.

Cellulose acetate membranes are characterized by an extraordinary high flow capacity and dimensional stability. The filters have good thermal resistance and can be used in various applications.

• Hydrophilic
• Low protein binding capacity
• Maximum operating temperature: 135 °C
• Non-sterile
• Autoclavable at 121 °C

Accessories Buchner funnels, porcelain Alternative Nitrocellulose membrane filters, white Alternative Nitrocellulose membrane filters, grid pattern Alternative Regenerated cellulose membrane filters, white Alternative Polycarbonate Track Etched (PCTE) membrane filters, white

The LABSOLUTE® latex-free disposable overalls with a hood, an elastic cuff and a front zipper are made of white PP fleece. They provide good protection, barrier properties and durability due to the taped seams.

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

Ideal for light-sensitive samples.

Accessories Stoppers, HDPE Alternative Volumetric flasks, class A, with hollow glass stopper, blue graduation Alternative Volumetric flasks, class A, with PE stopper, blue graduation Alternative Volumetric flasks, trapezoidal, class A, with PE stopper, blue graduation

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks.

• Increased heat transfer thanks to optimized form and small wall thickness
• Recessed measuring fields: reduce risk of scratching by the cuvette holder
• Arrow marker points to transmission direction
• Path length: 10 mm
• Outer dimensions (W x H x D): 12.5 x 45 x 12.5 mm

Accessories Cuvette rack, PP Alternative Disposable cuvettes for the UV range

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks.

• Increased heat transfer thanks to optimized form and small wall thickness
• Recessed measuring fields: reduce risk of scratching by the cuvette holder
• Arrow marker points to transmission direction
• Path length: 10 mm
• Outer dimensions (W x H x D): 12.5 x 45 x 12.5 mm

Accessories Cuvette rack, PP Alternative Disposable cuvettes for the VIS range

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C.

Accessories Screw caps, PP Accessories Pouring rings, PP Accessories Pouring rings and screw caps, PBT Alternative Laboratory bottles, clear, with PBT screw caps Alternative Laboratory bottles, amber, with PP screw caps

The LABSOLUTE® sample dishes made of aluminium are stable in form but yet of low weight. The smooth and flat bottom guarantees a firm stand. With practicle hand grip. Temperature resistance guaranteed up to 210 °C.

Alternative Weighing boats, square, PS Alternative Weighing boats, diamond-shaped, PS Alternative Weighing paper Alternative Aluminium dishes

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN 12338.

Alternative Crystallizing dishes, without spout, borosilicate glass 3.3

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa are temperature-resistant from -60 °C to 200 °C and have a better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Septa with a double-sided PTFE coating show a very low particle formation during penetration.

The magnetic seals are suitable for CTC PAL and Thermo Scientific TriPlus autosampler.

Accessories Crimp neck vials and micro-vials ND11, wide opening Accessories Snap ring vials and micro-vials ND11, wide opening Accessories Snap ring vials and micro-vials ND11, PMP or PP Accessories Crimping tools Accessories Decapping tools Accessories Crimping tools Accessories Decapping tools Accessories Crimping tool, pneumatic, manual Alternative With natural rubber / TEF septa Alternative With RedRubber / PTFE septa Alternative With butyl / PTFE septa Alternative With aluminium septa

The LABSOLUTE® separating funnels according to Squibb are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C as well as chemical resistant. The funnels are available with and without graduation. They comply with DIN ISO 4800, and are sold including a PTFE stopcock as well as a PE stopper. The chemical resistance mainly depends on the resistance of the PE stopper.

Alternative Separating funnels acc. to Squibb, graduated, borosilicate glass 3.3

The LABSOLUTE® micro tubes are made of high-quality PP and are resistant to mechanical and chemical stress. Simple and safe opening and closing of the vessel allow safe handling for greater comfort.

• Free of DNase, RNase and pyrogens
• Non-sterile
• Guaranteed metal-free
• Precise graduations lines on 1.5 and 2.0 ml reaction vessels
• Puncturable cap
• Matted cap with labelling field
• Can be centrifuged up to 25000 x g (1.5 and 2.0 ml) and 20000 x g (0.5 ml)
• Autoclavable at 121 °C

Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Accessories Rack for micro tubes, 20 wells, PP Alternative Safe seal micro tubes, PP Alternative Micro tube with flip cap, PP

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN 12337.

Alternative Crystallizing dishes, with spout, borosilicate glass 3.3