Sentez ve distilasyon için bileşenler

Type AR soda lime glass. Supplied in packs of approx. 1kg.

Removable stoppers at both tube ends. With tubing nozzles, Ø 8 - 10 mm.

Made of DURAN^® tubing. Angled to 75°.

Made of DURAN^® tubing. Splash heads are directly placed onto distillation flasks for separation of drops.

Two versions available:

• Straight, with cone and socket
• Bent with two cones at 75°

Suitable to be used in distillation assemblies for connecting flasks to condenser. Upper socket designed to accept thermometer either by screw thread adapter or by thermometer socket. With side cone at 75° angled to the center socket.

Manufactured from borosilicate glass 3.3. Suitable for feeding distillate from condensers into receiving flasks. Stem length is either 65 mm or 200 mm. Socket inclined 105° with outer tube of 12 mm diameter.

Made of DURAN^® tubing. Acc. to DIN 12594 and in addition to DIN standard, with two parallel necks, with two NS sockets and one NS cone.

Made of DURAN^® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.

Suitable for the usage of assembling with vacuum connections.

Made of DURAN^® tubing. Acc. to DIN 12594 and in addition to DIN standard, with one NS 14/23 socket and two NS cones (descending angle: 75°), for distillation thermometers of 55 mm built-in length.

Angled to 90°.

Polished. Density: 2.50 kg/dm3. Supplied in packs of approx. 1kg.

Made of DURAN^® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.

Made of DURAN^® tubing.

Made of DURAN^® tubing. DIN 12596. With Liebig condenser at 75° and vertical outlet with NS cone and vacuum connection with glass olives or thread GL14. With socket NS 14/23 for distillation thermometers of 55mm built-in length.

Strainless connection of ground joint equipment; for compensating vibrations from vacuum pumps; for length compensation of heated columns; angular misalignment.
Made of PTFE, with sharp folds and sealing rings on the outside; maximum deflection: 120°.

Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. Suitable for the usage of assembling various reactor systems. Available in two shapes: bend with angle 75° or 90°.

Made of DURAN^® - tubing. Bent 75° or 90°. With two NS cones.

Made of DURAN^® tubing. For packings like Raschig rings or glass beads, with NS socket and NS cone, with fixed vacuum jacket.

Made of DURAN^® tubing. With packing material support, ground glass cone and socket

Made of DURAN^® tubing. With NS socket and NS cone, with fixed vacuum jacket.

Made of DURAN^® tubing. With socket and outlet tube angled at 105°, 12mm diameter.

Made of DURAN^® tubing. Delivery adapter, bent (105°), with NS socket and NS cone, with drain tip.

Suitable for the usage of assembling with vacuum connections.

Suitable to be used in distillation assemblies for connecting flasks to condenser. Upper socket designed to accept thermometer either by screw thread adapter or by thermometer socket. Claisen type has a similar use as a standard still head adapter but it is supplied with an extra socket to accept dropping funnels, stirrers and so on.

Made of DURAN^® tubing. Acc. to DIN 12594 and in addition to DIN standard (*), with two parallel NS 14/23 sockets and two NS cones (descending angle: 75°), for distillation thermometers of 55 mm built-in length.

Made of DURAN^® tubing. Distilling links without condenser, with two vertical NS-cones. With or without socket NS14/23 for distillation thermometers of 55mm built-in length.

Made of DURAN^® tubing. Distilling links acc. to DIN 12594, with Liebig condenser and Claisen head, thread connections: GL 14 (water) and GL 18 (vacuum), with two sockets NS 14/23 for distillation thermometers of 55mm built-in length.

Made of DURAN^® tubing. According to DIN 12594. With Liebig condenser (angled 75°) and vertical Claisen head, water and vacuum connection with olives. With two sockets NS 14/23 for distillation thermometers of 55mm built-in length.

Made of DURAN^® tubing. With Liebig condenser and Claisen head, water connection with glass olives, with two sockets NS 14/23 for distillation thermometers of 55mm built-in length.

Made of DURAN^® tubing. Distilling links with Liebig condenser, outlet with NS cone, water connection with thread GL 14, with socket NS 14/23 for distillation thermometers of 55mm built-in length.

Resistant to heat and almost all chemicals.

Made of DURAN^®tubing. With 3 cones NS 14/23,vacuum connection with glass olive.

Made of DURAN^® tubing. With four cones NS 14/23, for round bottom flasks up to 250ml volume.

Made of DURAN^® tubing. DIN 12616. With or without interchangeable ground joint stopcocks. U-shape, side tubes plain or with olives (outer dia. 6mm).

Type AR soda lime glass. Supplied in packs of approx. 1kg.

Combination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shafts made of stainless steel, glass and for BOLA Stirrer Shafts.

Screw thread adapters , made of DURAN^® tubing, with screw-cap with aperture and silicone sealing ring with PTFE washers.

With 230 V/60 Hz/16 A/3,2 kW (max.), on / off relay and coolant water sensor made of 3.3 borosilicate glass with dual platinum electrode. Switches connected apparatus (e.g. a heater for a solvent distillation system) off permanently if it detects a shortage of cooling water. An optical and acoustic alarm signal is emitted simultaneously. The relay is connected to the power supply cable of the electrical device and the sensor is connected into the outlet line of the cooling water (10 mm bore tubing connectors are provided). Switch cable length: 5 metres.
Note: Supplied without the stand and accessories shown.

Complete Micro-distillation unit consisting of a Vigreux column with vacuum jacket (effective length 150 mm) and attached Liebig condenser (jacket length approx. 160 mm), stopper with vacuum attachment, 2 x NS 14.5 cone and 1 x NS 14.5 socket joint connections, permanently fixed, plastic (PP) tubing connectors, 100 ml evaporating flask, condensate distributor with 4 x 10 ml receiving flasks, 0 to +250 °C thermometer, heating bath trough with thick Duran walls and flat-ground and polished base (capacity approx. 600 ml), stand and mountings, magnetic hotplate / stirrer, Pt1000 sensor (to control the bath temperature).

Individual components:

• Vigreux column with vacuum jacket, effective length 150 mm, attached Liebig condenser (jacket length approx. 160 mm), stopper with vacuum attachment, 2 x NS 14.5 cone and 1 x NS 14.5 socket joint connections and permanently fixed plastic (PP) tubing connectors
• Evaporating flask, 100 ml, NS 14.5 socket
• Condensate distributor,with NS 14.5 socket, 4 x NS 14.5 cones
• Receiving flask, 10 ml, NS 14.5 socket
• Set of joint clips
• Heating bath trough, glass, volume approx. 600 ml, with polished base to improve heat conduction, thick walls, compatible with magnetic hotplate / stirrer.
• Ground joint (NS 14.5) thermometer, range 0 to +250 °C, 75 mm immersion
• Stand and mountings
• Magnetic hotplate / stirrer and Pt1000 sensor (for heating bath trough)

Side neck parallel with centre neck. 2 x sockets 1 x cone.

Made of DURAN^® tubing. With two sockets and one cone.
One neck 105° upwards.

Pack of 1 kg.

Made of DURAN^® tubing. Receiver adapters acc. to DIN 12594, with NS socket and NS cone, with drain tip, vacuum connection: thread GL18.

Made of DURAN^® tubing. Receiver adapters acc. to DIN 12594, bent (angle: 105°), with NS socket and NS cone, with drain tip, vacuum connection: thread GL18.

Solvent circulation apparatus, long form with Dimroth condenser made from stainless steel, cone NS 29/32, cone NS 29/32, socket NS 29/32, PTFE-valve 0 to 3 mm , vapor tube outside, borosilicate glass 3.3.
Type 1: with double oblique bore stopcock, PTFE-plug NS 18.8/6.0 mm bore, with hose connection 8 mm.
Type 2: with 2-way PTFE valve with fine thread for return flow and removal.

Suitable to be used in distillation assemblies to prevent raw liquid step over from flask to condenser.