Elektrot aksesuarları

For the SensoLyt^® armature, for the installation in a flow vessel or in a replacement fitting

• For drinking water, wastewater or in the process
• Also for high pressure and temperature conditions
• Easy to maintain by easy measuring chain replacement

For BlueLine pH electrodes, ScienceLine, IoLine and TopLine.
Cable length: 1 m coaxial cable.

For connecting pH electrodes with built-in temperature sensors and MultiPin™ plug head or S7 plug head (without temperature sensor). Suitable for a wide range of measuring devices from different manufacturers.

Flow vessels for conductivity measuring cells for applications to prevent air from entering or measurements in closed circuits. Flow vessels for conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.

D 3Sen: Designed for everybody who has to perform flow-through measurements in the field, i.e. ground water pumping tests. It consists of a rugged flow-through vessel in holder and a tripod , also suitable for pole mounting. With hose fittings for standard hoses with a diameter of 3/4" (19 mm). Three places are available for pH/ORP, conductivity and dissolved oxygen sensors (CellOx/FDO). Including mounting accessories.

For ammonia ISE electrodes 9512BNWP and 9512HPBNWP.

Sensor cable in high quality.

Sensor-specific vessels to test, calibrate and store dissolved oxygen sensors (galvanized and optical).

• Easy handling
• Standard conform calibration
• Perfect transport protection

For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.

Standard conductivity cell probe TetraCon^® 325:
4-pole cell with integral temperature sensor. Measuring range: 1µS/cm to 2S/cm.

Special conductivity cell probe TetraCon^® 325/C:
As TetraCon^® 325, 4-pole cell with integral temperature sensor, but with sensor head made of chemically resistant PEEK. Measuring range: 1µS/cm to 2S/cm

LiCI solution 1 mol/l in ethanol for measurements in non-aqueous media.

With built-in NTC 30 kOhm sensor and 2 x 4 mm banana plug.

Gateway with REST API interface for the allocation of data records. Measured data and meta data can be automatically transferred to a database system (e.g. LIMS) or a spreadsheet program (e.g. Microsoft Excel). Data is transmitted wirelessly via a barcode reader or the IDS wireless sensors. Suitable for the parameters pH, ORP, conductivity and dissolved oxygen of IDS wireless sensors.

• Safe, automated measurement data collection
• Manipulation-proof, GxP-compliant additional data (metadata)
• Future-proof data format (JSON)

Scope of supply: Gateway, power supply, antenna for WiFi/BT

250 ml bottle, screw cap and seal.

For refilling Orion™ pH electrodes and ISE.

Leak-proof and robust pH probes for pH meters 205, 206-pH1 and 206-pH2, insensitive to contamination, with maintenance-free gel electrolyte and gel storage cap.

Specifications
pH range:	0…14
Accuracy:	±0.02
Resolution:	0.01

Automatic titrators for redox and ion titrations.

• Create up to ten user-defined methods
• Saves up to 100 titration data sets with date/time stamp
• Easy data transfer to printer, computer or USB drive
• Programming of automated titration sequences
• Titrations can be performed unattended
• Showcase titrations, onscreen instructions and help menus on a large color graphic touchscreen display
• Easy to replace titrator parts
• Long lasting electrodes
• Display results in real time, in summary table and in data log (up to 100 entries)
• Tested and validated pre-defined methods can be loaded onto the titrator

For redox titrations by equivalence point method or preset mV endpoint, e.g. sulfite/SO₂, reducing sugar, ascorbic acid, peroxide as well as dissolved oxygen and dissolved organic substance.

Scope of supply:
START9200: Titrator incl. 20 ml burette, stirrer probe, dispenser probe, standard tubing kit, 1 l plastic bottle, GL38 bottle cap with drying tube, computer cable, manual on USB drive, 110-240 V power supply
START9201: As START9200, additionally with 9778BNWP redox glass electrode

Specifications
Titration precision:	±0.5 % RSD
Speed of stirrer probe:	250 ... 3700 rpm, 5 selectable speeds
mV range: Resolution: Rel. accuracy:	-2000.0 ... +2000.0 mV 0.1 mV ±0.2 mV
Temperature range: Resolution: Rel. accuracy:	-5,0 ... 100.0 °C 0.1 °C ±0.2 °C
Display:	5.7'' Touchscreen, 640 x 480 resolution
Burette sizes:	10 ml, 20 ml, 50 ml
Burette resolution:	25600 micro-steps per motor revolution 2 million micro-steps over full stroke range
Dosing accuracy:	Acc. to ISO 8655-3
Dimensions (W x D x H):	406 x 254 x 356 mm
Weight:	5.67 kg
Power supply:	100 ... 240 V, 50/60 Hz
Certification:	TÜV 3-in-1, FCC, EN/EIC 61326-1, IEC 61010, IP-51

Accessories Accessories for Automatic Titrators Orion Star™ Alternative  Alternative  Alternative Automatic Titrators Orion Star™ T910

Under ISO 9000 Quality protocols, all meters used in production and testing processes must be periodically recalibrated using nationally-treaceable standards. Thermo offers these in different qualities. Other test liquids are available on request.

Temperature range -30 to 135 °C, with Pt 1000 sensor, connection plug Ø 2 x 4 mm (W 5790 PP with Ø 2 x 2 mm), 1 m cable (W 2180-KOAX with KOAX plug head).

Temperature range -30 to 135 °C, with Pt 1000 sensor, connection plug Ø 2 x 4 mm, 1 m cable. Length: 96 mm from upper end of standard taper.