Erime noktası tayini

Capillary tubes for melting point analysis. Clear glass, different diameters and lengths. Special remarks are available. Other sizes on request.

Alternative Melting point tubes Electrothermal Alternative Melting point tubes Büchi Alternative Melting point tubes Marienfeld Alternative Melting Point Capillary Tubes KIMAX®

Alternative Melting point tubes Alternative Melting point tubes Büchi Alternative Melting Point Capillary Tubes KIMAX® Alternative Melting point tubes Electrothermal

Alternative Melting point tubes Alternative Melting Point Capillary Tubes KIMAX® Alternative Melting point tubes Marienfeld Alternative Melting point tubes Büchi

Very easy to use. Various characteristics can be observed simultaneously. Linear temperature scale adjustment. Enables quick identification of organic substances. Supplied with test and standard material sets. CE marked.

Dimensions (W x D x H):	430 x 100 x 140mm
Temperature range:	+50 to +260 °C

Accurately and reliably determining the melting point of up to three samples simultaneously.
The MP-800D has a custom designed user interface based on an established Android platform for intuitive setup and navigation. All operation is via the 7" colour touchscreen. Once programmed, users can leave the MP-800D to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.
A generous 8 GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC or can be printed directly from the unit via the accessory printer.
The MP-800D features a useful storage drawer to house all standard capillary tubes.

All units are factory supplied with a calibration certificate showing individual serial number for traceability. The SMP50 also conforms to Pharmacopeia and GLP.

Specifications
No of samples:	3 simultaneously
Temperature range:	Ambient to 400 °C
Temperature resolution:	0.1 °C
Display:	7'' HD Colour
Ramp rates:	0.1 to 20 °C in 0.1 °C increments
Temperature sensor:	PT1000 Platinum resistance
Memory:	8 GB (approx. 300 results with video)
Cool down time:	350 to 50 °C (approx. 12 min)
Heat up time:	50 to 350 °C (approx. 6 min)
Data transfer:	USB Flash drive
Sample level:	2 to 3 mm in 50 mm or 100 mm length capillaries
Weight:	4.6 kg
Power supply:	120-230 V, 50/60 Hz

Accessories Melting point tubes for MP series Accessories Printer for Melting point apparatus MP-800 / Spectralphotometers 7200, 7410, 7415, 7615 Alternative Melting point apparatus MP-200D / MP-200D-HR Alternative Melting Point Apparatus MP-400D Alternative Automatic Melting Point Apparatus MP-800D with IQ/OQ documentation

The melting point apparatus can be used to determine the melting point of up to 3 samples simultaneously. The extension arm is height-adjustable and can be folded away completely. The integrated LED illumination and the rotatable viewing head facilitate viewing of the melting process.

• Membrane keypad with simple menus for intuitive operation
• Digital microprocessor enables fast heat-up and precise temperature control
• Viewing head with 8x wide-angle magnifier and adjustable focus
• Audible signal when the set oven temperature is reached

-2 fixed ramp rates

• Storage of up to four melt temperatures in the temporary memory

Scope of supply: Melting point apparatus, lens hood, power supply with EU, UK, and US plug, 100 melting point tubes

Number of samples:	3 simultaneously
Temperature range:	Ambient + 5 °C ... 400 °C
Resolution:	0.1 °C
Accuracy:	±0.5 °C at 20 °C linearly to ±1.0 °C at 350 °C
Digital thermometer sensor:	Platinum resistance thermometer (PT100)
Chamber illumination:	3 x white Super Flux LED's
Illuminous intensity (per LED):	3500 Lux
Ramp rates:	1.0 °C/min or 10.0 °C/min
Capillary diameter:	2 mm
Dimensions (W x D x H):	200 x 355 x 80 mm
Weight:	2.5 kg
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Melting point tubes Electrothermal Accessories Accessories for melting point apparatus MP-250D Alternative Electrothermal Melting point apparatus MP-250D-P Alternative Electrothermal Melting point apparatus MP-250D-PR

The melting point apparatus can be used to determine the melting point of up to 3 samples simultaneously. The extension arm is height-adjustable and can be folded away completely. The integrated LED illumination and the rotatable viewing head facilitate viewing of the melting process.

• Membrane keypad with simple menus for intuitive operation
• Digital microprocessor enables fast heat-up and precise temperature control
• Viewing head with 8x wide-angle magnifier and adjustable focus
• Audible signal when the set oven temperature is reached

-Ramp rate individually adjustable

• Batch memory for up to 1000 melting point determinations with date, time, and batch number
• RS232 interface for connecting a printer (please order separately)
• USB interface allows transfer of measurement results to PC
• Storage of up to four temperatures in the temporary memory

Scope of supply: Melting point apparatus, lens hood, power supply with EU, UK, and US plug, 100 melting point tubes

Number of samples:	3 simultaneously
Temperature range:	Ambient + 5 °C ... 400 °C
Resolution:	0.1 °C
Accuracy:	±1 %
Digital thermometer sensor:	Platinum resistance thermometer (PT100)
Chamber illumination:	3 x white Super Flux LED's
Illuminous intensity (per LED):	3500 Lux
Ramp rates:	0.2 ... 10.0 °C/min
Capillary diameter:	2 mm
Dimensions (W x D x H):	200 x 355 x 80 mm
Weight:	2.5 kg
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Melting point tubes Electrothermal Accessories Accessories for melting point apparatus MP-250D Alternative Electrothermal Melting point apparatus MP-250D-F Alternative Electrothermal Melting point apparatus MP-250D-PR