Güvenlik gaz dedektörleri

Gas warning device for precise measurement of the amount of CO2 in the air. 3 alarm settings factory set: Time-weighted average (TWA) alarm (5000 ppm; 0.5% CO₂), Low alarm (15,000 ppm; 1.5% CO₂) and High alarm (30,000 ppm; 3% CO₂)

• No calibration required (unless local regulations state otherwise)
• Very long life sensor can last up to 15 years
• Up to 4 x CO₂sensors and 8 x CO₂ alarms can be used per Central Display Unit
• Supplied with a relay on each alarm which can be used to trigger ventilation, extraction or a building management system
• Easy installation and maintenance can be conducted by the user
• Additional (quick connect) CO₂ sensors and alarms available if more than one entrance to the laboratory or more than one risk area
• Assists in compliance with Exposure Limit regulations such as EH40

Scope of delivery: wall-mounted central display unit, CO₂ sensor and CO₂ alarm which can provide an early warning of a CO₂ leak.

Specifications:
Range : Accuracy :	0.1 to 5 % CO2 +/- 5 % of alarm setpoint
Alarm intensity :	88 dbA
Monitor Display :	16 digit 2 line LCD in ppm
TWA Alarm :	5,000 ppm (0.5 %) over 8 hours
CO2 Alarms :	15,000 ppm (1.5 %) and 30,000 ppm (3 %)
Operating Temperature :	-5 to 50 °C
Central Unit Dimensions :	175 x 110 x 75 mm
Sensor & Alarm Dimensions :	72 x 170 x 45 mm
IP Rating :	IP55 (IP54 Central Display Unit)
Warranty :	5 years for electronics and sensor

This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to the SI base unit kg and is measured against the primary standards of an NMI, e.g. NIST. Nitrate standard can be used for nitrate analysis in drinking water samples by ion exchange chromatography.The Honeywell BW™ Flex gas detector for guaranteed protection despite a slim design. Reliable infrared LEL monitoring is immune to airborne contaminants such as grease and silicones. The gas detector has special ingress protection so dust and water cannot harm the detector. The long-lasting runtime of 2 working months after 4.5 hours of charging and the easy one-button operation, even with gloves , makes the Honeywell BW™ Flex your safe companion.

Features & Benefits:

• High resolution display with a display in numerous languages
• Simultaneous monitoring of 5 gases
• Selection of more than 15 sensors such as sulfur dioxide, phosphine and many more.
• Bluetooth connectivity, smartphone app

Ergonomically designed and equipped with innovative infrared sensor technology: The Dräger X-am® 5600 is a multi-gas detector for measuring up to six gases.

• Ideal for personal protection
• Robust
• Waterproof
• Device measures explosive, flammable, toxic gases and vapours as well as oxygen

Set consisting of: Dräger X-am® 5600 device with the following sensor equipment:

• Dual IR Ex/ CO2
• XXS sensor O2
• XXS sensor CO/H2S

Battery and charging technology set incl. CSE case with pump, float probe and 5 m Viton hose

Portable gas monitors to detect gases in the surrounding atmosphere. They measure concentrations of toxic gases and oxygen in the atmosphere and issue an alarm when gas concentrations reach preset levels. The alarms are indicated by flashing lamp, intermittent audible buzzer, flashing gas concentration readout and vibration.

• LCD display
• R-sensor and CO-sensor with H₂-reduction
• Robust construction
• Water- and dust-proof
• Battery or rechargeable battery operation

Specifications
Gas alarm:	STEL Alarm, TWA Alarm, Over
Alarm volume:	80 db
Humidity:	0 ... 95 % RH (OX-04G: 10 ... 90 % RH)
Detection principle:	Electrochemical type (OX-04G: galvanic cell type)
Dimensions (W x D x H):	54 x 24 x 67 mm
Weight:	93 g
Power supply:	2 x AAA alkaline batteries, or 2 x AAA rechargeble batteries (Ni-MH)
Protection class:	IP 66/67
Warranty (sensor):	3 years (OX-04G: 1 year)