Buretter

The automatic LABSOLUTE® burettes according to Dr. Schilling can be used for several applications in many areas, such as electroplating, water treatment or sewage plants. They are impressing through their precise dosing, the possibility of fine titration and an exact draining tip. The class B burettes are justified to "Ex" and come with a LDPE bottle and solid stand. The tolerances comply with DIN EN ISO 385. There is a Schellbach stripe on the backside of the burettes that makes it easier to read the exact filling level. The bottle and the burette are fixed together by the titrating armature.

The burettes are delivered dismantled, but can be easily installed without additional tools.

On request, the burettes can also be offered with a plastic coating for better shatter protection at an extra charge.

The LABSOLUTE® burettes made of borosilicate glass 3.3 comply with DIN EN ISO 385. They are available with straight and lateral stopcock with glass plug or PTFE needle valve. The class AS burettes are a very economic way to get reliable values in volumetric analysis quickly and easily. They are calibrated to "Ex" and have a blue graduation and inscription as well as a Schellbach stripe on the backside to be able to read the meniscus precisely.

The LABSOLUTE® glass keys for burettes made of borosilicate glass 3.3 are compatible with the respective LABSOLUTE® burettes with straight or side stopcock. Delivery includes O-ring and plastic parts.

The LABSOLUTE® burettes made of borosilicate glass 3.3 comply with DIN EN ISO 385. They are available with straight and lateral stopcock with glass plug or PTFE needle valve. The class AS burettes are a very economic way to get reliable values in volumetric analysis quickly and easily. They are calibrated to "Ex" and have a blue graduation and inscription as well as a Schellbach stripe on the backside to be able to read the meniscus precisely.

The LABSOLUTE® burettes made of borosilicate glass 3.3 comply with DIN EN ISO 385. They are available with straight and lateral stopcock with glass plug or PTFE needle valve. The class AS burettes are a very economic way to get reliable values in volumetric analysis quickly and easily. They are calibrated to "Ex" and have a blue graduation and inscription as well as a Schellbach stripe on the backside to be able to read the meniscus precisely.

The LABSOLUTE® PTFE spindles / PTFE needle valves are compatible with the respective LABSOLUTE® burettes with straight or side stopcock.

With class AS, conformity certified, with batch identification, blue graduations, DIN EN ISO 385. PTFE spindle.

• Described as automatic burettes with fast titration and practical usage
• Especially suitable for field analysis where there is a risk of breaking
• The entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle stand
• Rapid filling by squeezing the bottle and fast titration by valve stopcock
• Inscriptions and graduations are printed with blue enamel which is specially designed for glass use
• Clear burettes are manufactured with schellbach stripe
• 10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume

Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.

• With splinter protection
• Adjusted to Ex
• Shatterproof, resistant to chemicals
• Exact spout tip, fine droplet formation
• Parts in contact with the medium: PE, natural rubber, PP, Borosilicate glass

• Manufactured from pre-vacuum calibrated borosilicate glass. They meet the highest quality standards according to DIN EN ISO 385
• Permanent quality control through all steps eliminates possible deviations from nominal values
• Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class "AS" standards
• Conformity ("DE-M") certified, with a batch number printed on the body. Batch certificate can be downloaded from the suppliers website
• Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the remaining liquid
• With schellbach stripe
• Inscriptions and graduations are printed with special blue enamel

Fast flow burette with 500 ml plastic reservoir bottle (up to 10 ml) or 1000 ml (from 15 ml). Schellbach stripe and graduation in high contrast blue enamel.

• Manufactured from pre-vacuum calibrated borosilicate glass. They meet the highest quality standards according to DIN EN ISO 385
• Permanent quality control through all steps eliminates possible deviations from nominal values
• Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class "AS" standards
• Conformity ("DE-M") certified, with a batch number printed on the body. Batch certificate can be downloaded from the suppliers website
• Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the remaining liquid
• Inscriptions and graduations are printed with white enamel

Silberbrand. Tolerances to class B, DIN EN ISO 385. Borosilicate glass 3.3 burette. PVC filling tube and silicone outlet tubing. LDPE reservoir bottle with HDPE base. Brass / PP micrometer screw. Graduations and inscriptions are in highly contrasting black enamel. With Schellbach stripes. Squeezing of bottle allows rapid filling. Fine titration is easy using the micrometer screw. Coarse titration is achieved by removal of the micrometer screw and using the push button. Calibrated to deliver (EX).

Polypropylene. Bosshead supplied with two adapters so that the clamp can fit on to support rods having diameters 8 to 14mm. Stainless steel spring loaded centre arm holds burette firmly against the two outer arms and is protected by rubber grips. Graduations and meniscus are visible at all times. Suitable for all burettes.