Pipettehjælpere

Pipetting made easy - the wireless LABSOLUTE® Pipette assistant ensures comfortable working with glass and plastic pipettes (0.1 - 100 ml).

• Effortless pipetting thanks to the ergonomic grip and smooth-running buttons
• Simple operation with one hand
• High working speed: a 25 ml pipette is filled in less than four seconds
• Extremely quiet and powerful motor with two speed settings
• Dispensing without motor, using gravity via "G" setting
• The charging device prevents overloading or heating of the battery
• Exchangeable membrane filters protect the device mechanism against contamination
• Differently coloured autoclavable cones allow customization

The supplied package includes charger, batteries, desktop stand, wall mount bracket and two spare membrane filters (PTFE 0.2 µm, PTFE 0.45 µm). You will also receive three differently coloured pipette holder cones (blue, green and orange). Accessories can be ordered separately if required.

Rechargeable batteries used: 2/3 A 1600 mAh1.2 V NiMH; discharge rate 10C

Specifications:
Volume range:	0.1 to 100 ml
Power supply:	2 x 1.2 V/ 1,000 mAh NiMH rechargeable batteries
Battery life:	8 hours continuous operation
Battery charging time:	2 to 3 hours

Accessories Volumetric pipettes, class AS, 1 mark, amber graduation Accessories Graduated pipettes, class AS, type 3, amber graduation Accessories Serological pipettes, sterile, PS Accessories Serological pipettes, short version, sterile, PS Accessories  Accessories Serological pipettes, sterile, PS, bulk Accessories Demeter pipettes, sterile, PS Alternative Safety pipette fillers, natural rubber

The LLG-Pipette controller easy enables fast and exact pipetting with glass and plastic pipettes.

• Ergonomic and lightweight construction for constant ease of use over prolonged usage
• Unique nose cone angle for enhanced flexibility in operation e.g. in fume hoods
• Eco-friendly rechargeable NiMH batteries, offering up to 8 hours of continuous working
• Easily replaceable batteries
• Autoclavable tip cone for avoiding cross-contamination

Scope of supply: Pipette controller, manual, charger, wall-mount, desktop stand

Accessories  Accessories  Accessories  Accessories  Accessories

Process a full rack of Thermo Scientific™ Matrix™ or Thermo Scientific™ Nunc™ tubes in less than one minute with this ergonomic, manual capper/decapper. The Thermo Scientific™ 8-Channel Screw Cap Capper/Decapper is designed to cap tubes to the optimal torque to maintain sample integrity and prevent sample loss during storage. The 8-channel Capper/Decapper is a practical addition to benchtop processing of screw top storage tubes.

• Improves processing throughput of manual procedures with automated column-wise decapping and capping in just four seconds
• Ensures reproducibility by capping all tubes to the optimal torque level specified for the tube
• Allows anyone in the lab to cap or decap tubes with a light weight, easy-to-use and ergonomic design
• Stand allows easy storage of removed caps during sample processing steps
• Virtually always available for use with long battery life and quick recharge time

For single and multi channel pipettes.

• With lid
• For 16 slides à 76 x 26 mm

The handwheel allows precise suction of the liquid into the pipette with one hand. When the wheel stops, the piston remains in the desired position. The liquid can be blown out by pressing the piston back or allowed to flow out by setting the lateral switch to "Ex".

Alternative Micropipette controller Alternative Pipette filler Pi-pump

Large capacity bulb which works perfectly with all pipette sizes from 1ml up to 100ml. First squeeze the silicone bulb and the thumb lever controls both the aspirate and dispense modes. Incorporates central button to blow out the residual liquid into the pipettes

Alternative Micropipette controller Alternative Pipette filler Pi-pump

PIPETMAN® L is a mechanical air-cushion pipette with a patented volume locking system that eliminates the need to adjust the volume during pipetting. Due to the innovative ejection system with a lever arm the ejection forces are very low. In addition, the eject button is adjustable, so that it can be comfortably operated by both right- and left-handed users. PIPETMAN® L has a 2D identification code.

• Volume Locking Mechanism
• Particularly light
• Adjustable for left- and right-handed users
• Traceable 2D identification code
• Color coded snaps that match the packaging of the Gilson tips
• Universal shaft that provides a secure hold for most pipette tip brands

Alternative Eight-channel pipettes

The pipette teats are available in different colours and are suitable for pasteur pipettes with Ø 7 mm.

• With roll-away lock
• Slightly flattened shape with structured, nonskid grip area
• Extra large volume of over 2 ml
• Oval body for better handling

Electric pipette controller for all commercially available pipettes from 0.1 to 200 ml. Ideal for working in a fume cupboard, as the hand and pump parts are functionally separated. The handle is particularly ergonomic and lightweight. Functional work is possible with both “Ex” and blow-out pipettes. The pipetting speed can be adjusted from 0.1 to 1.94 ml/s on the pump module. The built-in safety valve effectively prevents penetration of liquid into the device or handle. The supplied PTFE membrane filter with a pore size of 0.2 µm provides reliable protection against overfilling. Autoclavable at 121 °C (without PTFE membrane filter)
Scope of supply: Pipette controller, pump, safety valve, 2 x PTFE filter

Accessories Accessories for pipetus®-standard and pipetus®-junior Alternative Pipette controller, pipetus® junior Alternative Pipette Filler, pipetus®

Electric pipette controller for all commercially available pipettes from 0.1 to 200 ml. Ideal for working in a fume cupboard, as the hand and pump parts are functionally separated. The handle is particularly ergonomic and lightweight. Functional work is possible with both “Ex” and blow-out pipettes. The pipetting speed can be adjusted from 0.1 to 1.94 ml/s on the pump module. The built-in safety valve effectively prevents penetration of liquid into the device or handle. The supplied PTFE membrane filter with a pore size of 0.2 µm provides reliable protection against overfilling. Autoclavable at 121 °C (without PTFE membrane filter)
The pipette controller is supplied with an additional filter mounted on the pump module.

Scope of supply: Pipette controller, pump with filter, safety valve, 2 x PTFE filter

Accessories Accessories for pipetus®-standard and pipetus®-junior Alternative Pipette controller, pipetus® junior Alternative Pipette Filler, pipetus®

• For all pipettes from 0.1 to 200 ml.
• Ergonomic handle, very light weight of ca. 190 g
• Speed can be adjusted easily, continuously and exactly with one hand using 2 buttons
• A 50 ml pipette can be filled in less than 10 seconds
• Liquid release can be done either by gravity delivery when calibrated ''Ex'' (to deliver), or in blow out mode using the battery-operated motor
• Nickel-metal hydride battery allows approx. 8 hours of non-stop pipetting
• Charge level of the rechargeable battery is shown by the LED indicator (changes from green to red two hours before the battery must be recharged)

Scope of supply: Pipette controller incl. battery charger (100-240 V, 50/60 Hz), 4 plug adapters (EU, UK, US/J, AUS), battery, battery compartment cover, two replacement 0.2 µm membrane filters and instruction manual

Low cost, manual pipetting aid (no mains connection). Simple, safe and accurate. For all commercially available volumetric and graduated pipettes from 0.1 to 200 ml. Weighing only 130g, it ensures comfortable, ergonomic and problem-free pipetting. Each time the 'pump' button is pressed approximately 2 ml of sample fluid is drawn up. When the 'out' button is pressed the liquid is gently released via an accurate valve system with the amount of pressure exerted on the Blow-out button determining the speed of release. Blow-out pipettes can be fully emptied by pressing another button on the back of the unit. A standard PTFE membrane filter prevents overfilling.
Supplied with: pipetus^® junior with 2 round PTFE filters, sterile

Accessories Accessories for pipetus®-standard and pipetus®-junior Alternative Pipette controller pipetus® standard, with pump filter Alternative Pipette Filler, pipetus®

• Simple, one-button, manual operation
• Robust construction
• Pipette adapter protected by membrane filter, exchangable
• Practically maintenance free
• Ideal for graduated pipettes up to 100 ml

Alternative Pipette controller, Profiller™ manual 437

One single macro pipette controller covers the entire range of bulb and graduated pipettes from 0.1 to 200 ml.
The conical silicone adapter offers a secure fit for the different diameters. The unique valve system allows for easy compression of the newly designed bellows. The spring loaded lever enables an even more sensitive filling and delivery of liquids. The meniscus is easily adjustable.The unit is fully autoclavable at 121 °C (2 bar) according to DIN EN 285. A hydrophobic membrane filter protects the system from liquid penetration.

Supplied with: pipette controller incl. 3 µm spare membrane filter.

Accessories Membrane filter for pipette controller macro Accessories Accessories for pipette controller macro Alternative Micropipette controller Alternative Pipette filler Pi-pump

Comfortable and reliable. Thanks to its ergonomic design and easy handling, the micro-classic pipette controller provides the comfort needed for difficult work under the microscope. Suitable for disposable micropipettes with ring marks and other microlitre volume pipettes with a capacity up to 1ml. Suitable for left, or right-handed operation. The adapter and suction tube are autoclavable at 121 °C.

Accessories Spare adapter for pipette controller micro-classic Alternative Micropipette controller

With suction tube.

The pipetus^® is ergonomically sophisticated in every detail despite most modern technology, powerful and light-weight. Fits graduated, volumetric and Pasteur pipettes from 0.1 ml to 200 ml. Without reloading it can be operated up to one week. The colour display shows the selected defaults (speed) and the current battery capacity

• Automatic inductive charge in the park station guarantees constant readiness
• Controlled pipetting by a simple push of a button
• EX/Blow out switch for precise operating
• Speed key for 5 operating speeds
• No memory effect by inserted microcontroller
• Clear colour display with permanent display
• Optimal meniscus adjustment by sensitive valve technique
• Standard relief valve against penetration of liquid
• Ergonomic design for fatigue-free serial pipetting
• Power supply 100-240 V, with EU, UK, US plugs

Supplied with:
pipetus^®complete with mains operated charging unit and inductive charging stand, color display with battery level indicator, 2 additional round PTFE filters, additional safety valve and wall mount.

Accessories Accessories for pipetus®-standard and pipetus®-junior Accessories Power supply for pipette controller pipetus®, bottle-top dispensers and digital burettes opus® Alternative  Alternative Pipette controller pipetus® standard, with pump filter Alternative Pipette controller, pipetus® junior

• Easy and fatigue-free operation for both left and right-handed users
• A specially designed inlet cone accommodates pipettes from 0.1 ml to 200 ml
• The perfectly balanced valve unit ensures effortless liquid aspiration
• Precise and high sensitive meniscus setting
• A replaceable, hydrophobic membrane filter protects the interior from penetrating liquids
• Completely autoclavable
• With 3 µm membrane filter and manual

Highly comfortable pipette, intended for reliable repeat dispensing from 10 to 5000 µl. Unique trigger action mechanism eliminates thumb fatigue. Selected materials ensure reliability in use, day after day. Compact shape greatly limits internal instrument contamination. Wide selection between 53 different volumes; up to 73 doses per filling. Two-year warranty.

• 4-finger activation
• Setting knobs bear clear indication of volumes and number of aliquots
• Three positive displacement syringes, colour coded
• Self-locking mechanism
• Clear setting indication

Scope of supply:
Stepper™ 416, colour-coded adjustment knobs, adapter, samples of Ecostep syringes

Accessories Syringe tips, Ecostep for Stepper™ 411/416 Accessories Accessories for variable, repeating Stepper™ 416