Orbitale rysteborde

Powerful and smooth running orbital shaker. The maintenance-free brushless motor and the shaking mechanism with counterweight ensure smooth and stable running at all times. Digital display for speed and time. Two different platforms (610 x 460 mm or 760 x 460 mm) and 7 clamps for vessels from 25 ml to 2000 ml available. Please order platforms and clamps separately.

• Maximum load 25 kg
• Sturdy and robust steel housing
• Digital display with speed and time settings
• Variable speed from 50 to 500 min^-1
• Orbital Diameter of 25 mm for thorough mixing
• Timer setting from 1 to 99 min and continuous mode
• Various platforms and brackets available

Clamps for safe shaking of Erlenmeyer flasks.

Analogue vortex mixer with patented IR sensor for sample recognition: the shaking process starts automatically when the sample tube approaches the mixing cup head. This enables fatigue-free working, as the sample doesn't have to be pressed on the device.

• For IR sensor and continuous operation
• Electronic speed control
• Adjustable shaking speeds up to 3000 min^-1
• Very good chemical resistance

• Aufsatz Combifix KS mit 3 Spannleisten und Gummimatte
• Universaltablar KS mit Bohrungen für Federklammern

AS 130.1 Universal attachment: Able to hold most types of container using adjustable tension rollers
AS 130.2 Fixing clip platform: For shaking round bottom vessels, volumetric and Erlenmeyer flasks. Supplied without clips
AS 130.3 Petri dish attachment: For gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).
AS 130.4 Test tube holder: For intensive vibrating of small tubes, test tubes, cuvettes, centrifuge tubes.

Combifix SM A attachment: Flexible attachment with 5 clamping bars for various containers with flat bases.

Combifix SM B attachment: With 4 clamping bars for holding horizontal or tall containers securely.

Combifix SM C attachment: For separating funnels.

Universal tray SM: For flexible fitting with accessory spring clips or test tube stands.

Sliding Plates: Sliding plates with Combifix SM (rack systems Combifix SM, but with additional base plate).

Mounting set: for universal trays, or sliding plates on the 2-storey top frame SM.

SM attachment, 2-storey support: With 2 boards for spring clips (please order separately) or for mounting Combifix SM attachments.

2-storey top frame SM / TH: 2-storey top frame for all SM shakers. Dimensions adapted to TH 30. For vessels with a max. height of 14 cm (Erlenmeyer flasks 200 / 250 ml). Dimensions (w x d x h): 600 x 402 x 192 mm. For fastening the vessels, either universal trays SM or sliding plates with Combifix SM can be used.

Incubation chamber with standard and UV fluorescent illumination. Can be used in combination with SM shakers as a complete shaking incubator or as a stand-alone unit. For cell and tissue culture or micro-organism cultivation, production of secondary natural products and biogenic pharmaceuticals or genetic modification of useful plants.

Comprises:
Incubation chamber complete with light fittings, safety cut-out switch facility for internal accessory instruments and UV light on opening door.

Accessories available:
High temperature option (to 60 °C) as well as Fitted cooling coil and connections for refrigeration of TH 30 (cooling capacity according to external cooling unit used) - details on request.

The benchtop shaker is designed to operate in reach-in incubators, environmental rooms, or on lab benches. It performs continuously, even in temperatures from 4 ºC to 40 ºC (39.2 ºF to 104 ºF) and in the following humidity conditions: 80 % RH at or below 31 ºC (87.8 ºF), decreasing linearly to 50 % RH at 40 ºC (104 ºF).

• Choice of two platform sizes maximizes capacity
• Triple counter-balanced mechanism for optimum handling of full or unbalanced loads regardless of vessel placement and completely eliminates walking
• Over-sized, adjustable, suction cup style, rubber feet minimize vibration and provide maximum stability
• Heavy-duty, triple counter-balanced eccentric drive allows extended speed ranges of 25 to 525 rpm
• Power supply 115/230 V, 50/60 Hz

The Hula Dancer is a powerful orbital shaker with robust housing for high stability. It is suitable for a maximum load of 100 g. Hula Dancer basic with fixed speed of 2800 rpm.

Mini shaker which can be switched between orbital and reciprocating motions. Includes flask attachment system with 3 clamping rollers. Versatile, for use in medical diagnostics, haemotology, for cell cultivation or analysis. Max. load 4 x 500 ml or 2 x 1000 ml Erlenmeyer flasks. Timer 0 to 120 min/continuous.

Scope of supply: Shaker and accessory platform with 3 clamping rollers and anti-slip mat

Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.

• Controller with touch display and advanced features
• Orbital shaking motion
• Programmable timer

Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.

• Analogue control
• Orbital shaking motion
• Timer 0 to 120 min.

Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.

• Controller with touch display and advanced features
• Reciprocal shaking motion
• Programmable timer

Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.

• Analogue control
• Reciprocal shaking motion
• Timer 0 to 120 min.

• Electronically controlled and programmable shakers
• Slow, soft-start greatly decreases the risk of spills
• Erlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber strips
• Digital LCD display for speed and run time control
• Integrated overload shutdown
• Permanent motor feedback, which automatically adjusts the speed even if the load is changed during operation
• Continuous mode or timer for up to 49 hours
• Soft rubber feet minimise system movement
• Platform with non-slip surface

With load capacities from 16 to 68 kg and over 70 accessory options, the Heavy Duty Shakers are designed to handle a range of applications. Available as analog or digital models with microprocessor control to provide variable speed and consistent shaking, while ramping to the set speed. Microprocessor displays the last set-point and will restart if power is interrupted.

• Triple Eccentric Drive
• Speed Ramping Feature
• Spill-Resistant Design
• Suitable for CO₂ environments

• Touchpad Control with Independent LED Displays for speed and time
• Speed Calibration Mode
• RS232 Interface
• Load Sensor and Overload Protection
• Audible Alarm
• Timer 1 s to 160 h

Thermo Scientific MaxQ HP Incubated and Refrigerated Floor Shakers Models provide HEPA filtration for maximum protection from contamination, a directed airflow system for optimum temperature uniformity and ideal growth conditions, even when the units are full, and an ergonomic design for easy access to your product.

• HEPA filtration for maximum protection from contamination
• Crevice-free, stainless steel interior with coved corners for easy cleaning
• At-a-glance monitoring of time, speed, and temperature
• Foot pedal opens lid for hands free operation
• Angled sides, lower front, and convenient platform height ensure a comfortable reach into the chamber
• Thermal pane window provides a large viewing area
• Drain system with valve makes it easy to eliminate liquid, reducing the risk of water borne contamination
• Access port in rear of cabinet allows insertion of probes, CO₂ gassing manifolds or other equipment

Small incubation chamber, Can be used in combination with the KS and TiMix 5 shakers as a complete shaking incubator or as a stand-alone unit. For cell and tissue culture or micro-organism cultivation, production of secondary natural products and biogenic pharmaceuticals, or genetic modification of useful plants.

Comprises:
Coated metal casing with window in the front door which opens upwards and with safety cut-out switch facility for internal accessory instruments on opening the door.

High temperature option (to 60 °C) available on request.

With load capacities from 16 to 68 kg and over 70 accessory options, the Heavy Duty Shakers are designed to handle a range of applications. Available as analog or digital models with microprocessor control to provide variable speed and consistent shaking, while ramping to the set speed. Microprocessor displays the last set-point and will restart if power is interrupted.

• Triple Eccentric Drive
• Speed Ramping Feature
• Spill-Resistant Design
• Suitable for CO₂ environments

The Incubating/Cooling Orbital Shaker is microplate ready without the need for any additional accessories. Optional modular blocks can accommodate micro-tubes, centrifuge tubes, vials, or culture tubes. Unit holds microplates or modular blocks with a 127 mm tall interior capacity. Ideal for analyses that require a stable, controlled temperature.

• Heats to 65°C and cools to 10°C below ambient
• LED displays for temperature, speed and time
• Temperature Calibration Mode
• Triple Eccentric Drive
• Overload Protection
• Speed Ramping Feature
• Audible Alarm
• Caution Hot Indicator
• Polycarbonate Lid

Big heavy-duty shaker for high loads also during continuous operation (floor installation only). With digital display and programmable control with Touch-Display. Further accessories on request.

Scope of supply: Basic device without shaking plate, without rack system

Big heavy-duty shaker for high loads also during continuous operation (floor installation only). With digital display and programmable control with Touch-Display. Further accessories on request.

Scope of supply: Basic device without shaking plate, without rack system

Powerful shaker with a small footprint.

• LED display for speed and runtime
• Timer up to 99 h 59 min or continuous operation

Stainless steel shaker with orbital shaking motion was specially designed for use in incubators with up to 20 % CO₂ concentration and 95 % humidity. This shaker is therefore ideal for the development of cell cultures.

• Timer 1 s to 99 h 59 min or continuous operation
• External control unit with digital display for operation outside the incubator

Small, quiet running, low-friction shaker with effective orbital movement and a maximum loading of 2 kg.

• Electronic speed control and timer adjustment
• Digital display for speed, timer function, and operating modes
• Electronic timer: 0 to 9 h 59 min or continuous mode (∞)
• All functions can be controlled and documented using labworldsoft^® software
• Special variant with rotation reversal available on request
• Large selection of attachments for various vessel shapes and sizes
• Interface RS 232/analogue

Compact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg. Large selection of attachments enable use with a wide variety of vessel shapes and sizes. Electronic speed control and timer adjustment.

Attachments are not included - Please order separately.
-Timer: 5 to 50 min or continuous operation

Compact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg. Large selection of attachments enable use with a wide variety of vessel shapes and sizes. Electronic speed control and timer adjustment.

Attachments are not included - Please order separately.
-Separate digital speed and timer displays with operating mode indication

• Timer: 1 min to 99 h 59 min or continuous operation
• Controlled stop-point positioning function (enables use in automated robotic sampling routines)
• All functions can be controlled and documented using labworldsoft^® software
• Interface: RS 232 / analogue
• Special variant with reverse rotation function available on request

Low-profile laboratory shaker with large platform and 15 kg load capacity. With continuously adjustable speed range: 0 to 300 rpm, digital display and timer. Continuous operation is guaranteed even under extreme loads. Requires accessory attachments for operation (these are not supplied)

Ideally suited for vessel sizes over 250 ml, e.g. round bottom flasks, erlenmeyer flasks, culture flasks, bottles etc. Developed for biological and microbiological growth tests and for production of stock solutions.

• Timer 0 to 56 min
• Interface RS 232

Microprocessor controlled shaking platform providing smooth and quiet horizontal orbital motion for mixing in bottles, flasks and beakers.

• Continuous or timed operation (1 min to 96 h) with automatic switch-off
• Reliable direct drive system
• Automatic load balancing system
• The five interchangeable accessory platforms enable a wide choice of vessels to be used, including bottles, flasks and beakers, dishes, boxes and petri-dishes

Powerful and efficient microprocessor controlled, multi-functional orbital shaker providing all that is required to mix your samples: rotation, reciprocation and vibration. This enables optimisation of the mixing whether in flasks, beakers, Petri dishes or other laboratory vessels.

• Orbital motion, orbital reciprocation and vibration functions all in one product
• Reciprocal rotation: 0 to 360° turning angle, in 30 degree steps
• Vibration: 0 to 5° turning angle, 1 degree steps
• Loading capacity: 8 kg
• Fully programmable sequence that can use one or all the functions
• 6 interchangeable platforms for vessels up to 1000ml including a multi-level platform to hold a large number of various microplates, Petri dishes and culture bags
• Timer 1 min to 96 h

A compact, orbital shaker with ideal swivel motion. The shakers can be set up individually by using the comprehensive range of accessories.

• Compact shaker
• Backlight LCD display for speed and timer adjustment.
• Speed, time and operating mode can be viewed simultaneously
• Adjustable safety speed
• PC control via RS232 interface, the special Shaker PC software can realise the setting of instrument parameters on the PC and the display of working curves real-time
• 2 years warranty

Small, quiet running, low-friction shaker with effective orbital movement and a maximum loading of 2 kg.

• Electronic speed control and timer adjustment
• LED scale bar speed and time display
• Large selection of attachments for different container types and sizes
• Timer 5 to 50 min/continuous

• An overtemperature sensor preventatively shuts off the unit in a dangerous heat-up situation, particularly valuable for you in case of continuous operation
• The insulated drive system prevents any heat-up coming from the motor and consequently thermal damage to your sample
• Designed with a low center of gravity which prevents gliding at high speed, even on a damp surface
• Set and continuously adjust the variable speed on the analog control knob for gentle to powerful mixing, allows for smooth to ridged mixing of viscous media and solids
• An analog process timer allows for unattended operation. When the set time has elapsed, an acoustic alarm will sound and the operation stops
• Timer up to 120 min

• A large selection of optional attachments and clamping rolls is provided for the use of various vessels and sizes
• The 3 mm vibration orbit gives excellent results especially in large vessels

The Orbital Shakers Unimax are suitable for the modular Incubator 1000 and are recommended for applications which require variable temperatures.

• An overtemperature sensor preventatively shuts off the unit in a dangerous heat-up situation, particularly valuable for you in case of continuous operation
• Designed with a low center of gravity which prevents gliding at high speed, even on a damp surface
• Set and continuously adjust the variable speed on the analog control knob for gentle mixing
• An analog process timer allows for unattended operation. When the set time has elapsed, an acoustic alarm will sound and the operation stops

The Orbital Shakers Unimax are suitable for the modular Incubator 1000 and are recommended for applications which require variable temperatures.

• An overtemperature sensor preventatively shuts off the unit in a dangerous heat-up situation, particularly valuable for you in case of continuous operation
• Designed with a low center of gravity which prevents gliding at high speed, even on a damp surface
• Set and continuously adjust the variable speed on the analog control knob for gentle mixing
• An analog process timer allows for unattended operation. When the set time has elapsed, an acoustic alarm will sound and the operation stops

• Orbital shaker Unimax 1010
• Heating module
• High incubator hood

Compact and space saving model specially designed for culture plates. With a wide range of optional attachments, for up to 16 Erlenmeyer flasks.

• An overtemperature sensor preventatively shuts off the unit in a dangerous heat-up situation, particularly valuable for you in case of continuous operation
• Insulated drive system prevents any heat-up coming from the motor and consequently thermal damage to your sample
• Designed with a low center of gravity which prevents gliding at high speed, even on a damp surface
• Set and continuously adjust the variable speed on the analog control knob for gentle mixing
• An analog process timer allows for unattended operation. When the set time has elapsed, an acoustic alarm will sound and the operation stops
• Timer 1 to 120 min

Benchtop orbital shaker with non-slip, rubber-coated platform and spill-proof edges for gentle shaking.

• Variable shaking speed up to 100 rpm
• Also suitable for use in cold rooms and incubators (not for CO₂ incubators)
• Further platform optionally available

Stainless steel shaker with orbital shaking motion was specially designed for use in incubators with up to 20 % CO₂ concentration and 95 % humidity. This shaker is therefore ideal for the development of cell cultures.

• Timer 1 s to 99 h 59 min or continuous operation
• External control unit with digital display for operation outside the incubator

For orbital shaker Ika KS501 digital and reciprocating shaker Ika HS501 digital.
AS 501.1 Universal attachment
For a variety of vessels (flasks, beakers etc.) with volumes of at least 50 ml (ideally greater than 250 ml). With tension rollers that can be mounted on 2 levels.
Usable area: 420 mm x 420 mm.
Dimensions (W x D x H) 480 mm x 500 mm x 120 mm. Weight: 4000 g.

AS 501.4 Gridded clip attachment
(Without spring clips). For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml. Dimensions (W x D x H) 475 mm x 460 mm x 95 mm, weight 2640 g.
Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)

AS 501.5 Dish attachment
For the gentle movement of petri dishes, but also suitable for gentle mixing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers). Fitted with a non-slip, plastic mat.
Dimensions (W x D x H) 450 mm x 450 mm x 45 mm.
Usable area: 420 mm x 420 mm, weight 1120 g

Further accessories on request.

Robust, high-capacity orbital shakers for advanced research, production, and routine tasks. Can be used in incubators, climatic cabinets, and refrigerators. With variable speed adjustment from 15 to 525 min^-1.

• For timer and continuous operation
• 99 individual programs can be stored
• Soft start avoids abrupt starting and stopping movements
• Automatic imbalance detection with optical/acoustic alarm: the device stops until the incorrect loading has been corrected
• Automatic restart after interruption of the power supply while maintaining the set parameters
• Large, easy-to-read touchscreen display with speed and run time indication
• With maintenance-free, brushless motor
• Monitoring of alerts, alarms, and interaction protocols for more safety and reproducibility
• USB and Ethernet connection for data output and device monitoring
• Low noise level
• Easily removable platform and rounded corners for rapid cleaning

For correct and variable positioning of the ultrasonic transducers.

• Suitable for direct and indirect sound reinforcement
• Can be used with and without LS 40 noise protection box
• Commercially available sockets can be mounted on stand rod (d=16 mm)
• Material base and rod: stainless steel

Powerful shaker for large loads. Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations.

• With touch display
• Orbital shaking motion
• Programmable timer

Powerful shaker for large loads. Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations.

• Analogue control
• Orbital shaking motion
• Timer 0 to 120 min

Powerful shaker for large loads. Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations.

• With touch display
• Reciprocal shaking motion
• Programmable timer

Powerful shaker for large loads. Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations.

• Analogue control
• Reciprocal shaking motion
• Timer 0 to 120 min

Powerful shaker for large loads. Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations.

• With touch display
• Shaking motion can be switched between orbital and reciprocating
• Programmable timer

Powerful shaker for large loads. Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations.

• Analogue control
• Shaking motion can be switched between orbital and reciprocating
• Timer 0 to 120 min

This simple benchtop rotator is ideal for a number of laboratory applications including DNA purification, hybridization or sample mixing. It is digitally controlled and can also be set in an oscillating mode to increase mixing efficiency. This tube rotator accepts tubes from 0.5 to 50 ml. The rotisseries to hold each of the tubes are included in the set.

Features:

• 360° revolution, adjustable angle from 0 to 90°
• Speed: 10 to 40 rpm, adjustable
• For tubes of 0.5 to 50 ml, interchangeable tube racks
• Can be used in a cold room or incubator (4 °C to 60 °C)

Small, quiet running, low-friction shaker with effective orbital movement and a maximum loading of 2 kg.

• Electronic speed control and timer adjustment
• Digital display for speed, timer function, and operating modes
• Electronic timer: 0 to 9 h 59 min or continuous mode (∞)
• All functions can be controlled and documented using labworldsoft^® software
• Special variant with rotation reversal available on request
• Large selection of attachments for various vessel shapes and sizes
• Interface RS 232/analogue