Magnetiske omrørere med opvarmning og motor

An Ultra-flat inductive magnetic stirrer without heating with timer. The modern magnet coil technology consists only of non-moving parts and therefore guarantees a wear-free drive. For a better mixing of samples it is possible to change the direction of rotation every 30 seconds.

• Max. stirring quantity per stirring position 400 ml
• Timer (1 to 99 min, infinitely)
• 100 % wear- and maintenance-free inductive drive
• LED-display for an exact adjustment of the rotation speed
• Digital regulated rotation speed
• Alteration of the stirring direction
• High Protection class IP 65
• Stainless steel surface

Scope of supply: Magnetic stirrer, 4 stirring rods 25 x 8 mm

Specifications
Stirring positions: Distance between Stirring postions: Max. Stirring quantity (H2O):	4 95 mm 4 x 0.4 l = 1.6 l
Speed range:	15 ... 1200 min-1
Permissible ambient temperature:	5 ... 40 °C
Magnetic bar:	max. 25 mm
Display:	LED
Heating plate (W x D):	122 x 385 mm
Dimensions (W x D x H):	126 x 457 x 13.5 mm
Weight:	1.9 kg
Power supply:	100 ... 240 V, 50/60 Hz
IP code:	IP 65
Warranty:	3 years

Alternative Magnetic stirrer LLG-uniSTIRRER 2 Alternative Magnetic stirrer LLG-uniSTIRRER 1

Universal magnetic stirrer with an outstanding price-performance ratio. Safety features include a "hot" warning display and a stirring function that continues to run until the plate temperature is below 50 °C, even when the device is switched off. A digital timer enables unattended operation and can be set from 1 min to 99 h 59 min. When the set time has elapsed, the unit stops automatically. An integrated control function offers precise control of the heated fluid temperature via a remote PT1000 temperature probe. The device is equipped with a Ø 135 mm stainless steel plate with glass ceramic, suitable for the LLG-Universal reaction block systems.

• Timer (1 min to 99 h 59 min)
• Maintenance-free, brushless DC motor
• Stainless steel plate with glass ceramics coating
• Digital control and backlit display
• Stirrer and display can be controlled remotely via an RS232 interface
• Hot surface indicator
• Sturdy metal housing
• Powerful stirring
• Connection for PT1000, integrated control function

Scope of delivery: Magnetic stirrer with PT1000 probe, rod, holder

Specifications
Max. stirring quantity (H2O):	20 l
Speed: Accuracy: Magnetic bar:	100 ... 1500 min-1 ± 1 min-1 max. 80 mm
Display:	LCD
Heating plate:	Ø 135 mm
Permissible ambient temperature: Temperature range:	5 ... 40 °C RT ... 340 °C
Setting accuracy: Control accuracy: Heat output:	±0.1 °C ±0.2 °C 550 W
Safety temperature: Length PT1000 sensor:	360 °C 198 mm
Dimensions (W x D x H):	160 x 285 x 85 mm
Weight:	2.8 kg
Power supply:	200 ... 240 V, 50/60 Hz
IP code:	IP 42
Warranty:	3 years

Accessories Accessories for LLG-uniSTIRRER 3 / LLG-uniSTIRRER 5 / LLG-uniSTIRRER 7 Alternative Magnetic stirrer with heating LLG-uniSTIRRER 3, complete set Alternative Magnetic stirrer with heating LLG-uniSTIRRER 7, complete package Alternative  Alternative Magnetic stirrer with heating LLG-uniSTIRRER 5 pro, complete set

Universal magnetic stirrer with an outstanding price-performance ratio. Safety features include a "hot" warning display and a stirring function that continues to run until the plate temperature is below 50 °C, even when the device is switched off. An integrated control function offers precise control of the heated fluid temperature via a remote PT1000 temperature probe. The device is equipped with a stainless steel plate with glass ceramic (184 x 184 mm).

• Maintenance-free, brushless DC motor
• Digital control and backlit display
• Stirrer and display can be controlled remotely via an RS232 interface
• Hot surface indicator
• Stainless steel plate with glass ceramic
• Sturdy metal housing
• Powerful stirring
• Connection for PT1000, integrated control function
• Mountable rod on the left and on the right side of the stirrer

Scope of delivery: Magnetic stirrer with PT1000 probe, rod, holder

Specifications
Max. stirring quantity (H2O):	20 l
Speed range: Accuracy: Magnetic bar:	100 ... 1500 min-1 ±1 min-1 80 mm
Display:	LCD
Heating plate:	184 x 184 mm
Permissible ambient temperature: Temperature range:	5 ... 40 °C ambient ... 550 °C
Setting accuracy: Control accuracy: Heat output:	±0.1 °C ±0.2 °C 1000 W
Safety temperature: Length PT1000 sensor:	580 °C 198 mm
Dimensions (W x D x H):	215 x 360 x 112 mm
Weight:	5.3 kg
Power supply:	200 ... 240 V, 50/60 Hz
IP code:	IP 21
Warranty:	3 years

Accessories Accessories for LLG-uniSTIRRER 3 / LLG-uniSTIRRER 5 / LLG-uniSTIRRER 7 Alternative Magnetic stirrer with heating LLG-uniSTIRRER 3, complete set Alternative Magnetic stirrer with heating LLG-uniSTIRRER 5, complete package Alternative  Alternative Magnetic stirrer with heating LLG-uniSTIRRER 7 pro

Cost-effective laboratory stirrer designed for simple stirring tasks for quantities up to 20 l (H₂O). Automatic speed adjustment in the range between 50 and 2200 min^-1 via microprocessor-controlled technology. Safety circuits ensure automatic cut-off in an anti-stall or overload situation. Actual and set speed are constantly monitored ensuring no undesired speed variations, even if the sample viscosity changes.

• Brushless, maintenance-free motor
• Digital speed display
• Display for speed or torque changeable
• Infinitely adjustable speed
• Overload protection
• Non-slippery mat
• Slim casing
• Quiet operation
• Error code display
• RS232 port

Stand:
Stainless steel stand incl. boss head, dimension (W x D x H): 200 x 310 x 780 mm, non-slippery mat

Stirrer:
4-blade propeller stirrer, stainless steel, shaft length 400 mm, stirrer diameter 50 mm

Scope of supply: Overhead stirrer LLG-uniSTIRRER OH2, stand, non-slippery mat and 4-blade-propeller stirrer

Specifications
Max. stirring quantity (H2O):	20 l
Speed range:	50 ... 2.200 min-1
Max. viscosity:	10,000 mPas
Motor rating input/output:	60/50 W
Speed display accuracy:	± 3 min-1
Max. torque at stirring shaft:	40 Ncm
Display:	LCD
Chuck range:	0.5 ... 10 mm
Dimensions (W x D x H):	83 x 186 x 220 mm
Power supply:	110 ... 240 V, 50/60 Hz
IP code:	IP 21
Warranty:	3 years

Accessories Accessories for overhead stirrer LLG-uniSTIRRER OH2

Universal magnetic stirrer with outstanding price-performance ratio and new, improved design.

High level of safety thanks to "Hot" display with continuing stirring function until the plate temperature has dropped below 50 °C, even when the device is switched off. Integrated control function for precise control of the media temperature by a connected PT1000 temperature probe.

• Stainless steel plate with ceramic coating
• Digital speed and temperature control
• LED display
• "HOT" display for hot surfaces, even when the device is switched off
• Fixed safety circuit of the hotplate temperature at 320 °C
• Connection for PT1000 temperature probe, integrated control function. The control accuracy with temperature sensor is ±0.5 °C.

Scope of supply: Magnetic stirrer, PT1000 temperature probe, rod, holder

Accessories Accessories for LLG-uniSTIRRER 3 / LLG-uniSTIRRER 5 / LLG-uniSTIRRER 7

Universal magnetic stirrer with outstanding price-performance ratio and new, improved design.

High level of safety thanks to "Hot" display with continuing stirring function until the plate temperature has dropped below 50 °C, even when the device is switched off. Integrated control function for precise control of the media temperature by a connected PT1000 temperature probe.

• Digital timer (1 min to 99 h 59 min)
• Maintenance-free, brushless DC motor
• Stainless steel plate with ceramic coating
• Sturdy metal housing
• Powerful stirring
• Digital control, backlit display
• Display for hot surfaces, even when the device is switched off
• Fixed safety circuit of the hotplate temperature at 360 °C
• Connection for PT1000 temperature probe, integrated control function. The control accuracy with temperature sensor is ±0.2 °C.

Scope of supply: Magnetic stirrer, PT1000 temperature probe, rod, holder

Accessories Accessories for LLG-uniSTIRRER 3 / LLG-uniSTIRRER 5 / LLG-uniSTIRRER 7

Universal magnetic stirrer with an outstanding price-performance ratio and new design.

High level of safety thanks to "Hot" display with continuing stirring function until the plate temperature has dropped below 50 °C, even when the device is switched off. Integrated control function for precise control of the media temperature by a connected PT1000 temperature probe.

• Maintenance-free, brushless DC motor
• Stainless steel plate with glass ceramic coating
• Heatable
• Sturdy metal housing
• Powerful stirring
• Digital control, backlit display
• RS232 for stirrer control and display of all parameters via PC
• Display for hot surfaces, even when the device is switched off
• Fixed safety circuit of the hotplate temperature at 580 °C
• Connection for PT1000 temperature probe, integrated control function. The control accuracy with temperature sensor is ±0.2 °C.
• Rod can be mounted on the right and left side of the magnetic stirrer

Scope of supply: Magnetic stirrer, PT1000 temperature probe, rod, holder

Accessories Accessories for LLG-uniSTIRRER 3 / LLG-uniSTIRRER 5 / LLG-uniSTIRRER 7 Alternative Magnetic stirrer with heating LLG-uniSTIRRER 3, complete set Alternative Magnetic stirrer with heating LLG-uniSTIRRER 5, complete package Alternative LLG-Magnetic stirrer RCT standard 2.0

The next generation of our top-selling IKA/LLG-Labware co-branded LLG-RCT Standard magnetic stirrer. New design, new features! Trusted and reliable quality!

• Digital controlled speed and temperature
• Clearly arranged LED display
• Digital display of set safety temperature limit
• Hot top indicator, hot surface warning to prevent burns
• Adjustable safety circuit of heating plate temperature
• Digital error code display
• Connection for external PT1000 temperature probe
• The control accuracy with contact thermometer ETS-D5 is ±0.5 °C
• Aluminium hotplate for optimal heat transfer
• Enhanced safety due to improved heat control technology
• USB interface
• Powerful motor
• Improved magnetic coupling
• Supplied with housing protection cover
• Tested acc. to DIN EN IEC 61010-1

Scope of supply: Magnetic stirrer, contact thermometer ETS-D5, temperature probe PT1000, housing protection cover, stand accessories

Accessories Protective cover H 105

Multi-Well Holder and Inserts.
This unique Multi-Well Holder is designed to hold either one or two inserts for flasks. The inserts are available for 10ml, 25ml, 25ml, 100ml and 150ml flasks. Flask inserts also feature cut-away sides for use with two or three neck flasks and accepts the optional safety lifting handles.

Alternative Accessories for Magnetic Stirrers - Heat-On Attachments

Magnetic stirrer with ceramic-coated aluminium heating plate, stirring speeds up to 1700 min-1, timer and PT100 temperature sensor. With WiFi connection to the VELP Ermes Cloud Platform for uploading, managing, monitoring and exchanging results and parameters. Access to the device is possible via PC, Smartphone and Tablet.
Equipped with extensive safety functions: independent safety circuits protect the device in case of overtemperature, adjustable temperature limitation, warning in case of hot surface, protection against unattended heating as well as alarm and switch-off function if the temperature sensor is not immersed in the medium.

• Suitable for stirring volumes up to 20 l
• Powerful, brushless motor
• Torque compensation to keep the speed constant even on viscosity changes
• Reverse of stirring direction
• Resistant housing made of die-cast
• Chemical- and scratch-resistant heating plate
• Gentle start of the stirrer
• Temperature control via software up to 370 °C
• All settings configurable on menu
• Clear display of all parameters
• Software updates by WiFi

Scope of supply: Magnetic stirrer, PT100 temperature probe, support rod, clamp

Accessories  Accessories Temperature probes for Velp magnetic stirrers Accessories  Alternative

3 possible operation modes guarantee optimum adjustment to your application:
Operating mode A: Suitable for work with varying parameters (from -50°C to 450°C). Adjustable safety temperature
Operating mode B: Suitable for repeated operation under uniform conditions and parameters
Operating mode C: Suitable for unsupervised operation

• with optimised PID control
• reset function
• includes stainless steel sensor probe H 62.51
• for all magnetic stirrers with a DIN 12878 class 2 contact thermometer connection, e.g. IKA^®, Heidolph and Corning with adapter AD-C1.

ETS-D6 additionally with integrated pH measuring instrument (without pH electrode) and large, graphic LCD display with multilingual user guide.

Specifications Temperature
Measuring range:	-50 to 450°C
Resolution:	±0.1Κ
Accuracy*:	±0.2K
Control accuracy:	0.1K
Control accuracy (with sensor)	±0.5K
Voltage:	8 to 16V d.c.
Current (at 9V) Connection:	15 mA DIN 12878 Class 2
Operating range: Max. R.H.:	0 to 60°C 80%
Protection class: Connector:	IP54 6-pole, DIN 45322
Weight:	0.2kg
Tested to DIN EN IEC 61010-1.

Accessories Accessories for ETS-D5 / ETS-D6 contact thermometer

Compact, electronic overhead stirrer for easy operation.

• Can be integrated in closed systems such as fume hoods, reactors or production systems
• Suitable for low to medium viscosity media
• Quick-action chuck for stirring tools up to 10 mm diameter
• "Max" button for short-term operation at maximum speed
• Timer function
• Digital rotation speed display
• Automatic switch-off with overheating protection

Specifications
Stirring quantity max. (H2O):	25 l
Speed range:	20 ... 2000 rpm
Max. viscosity:	10000 mPas
Motor rating input/output:	105/75 W
Max. torque at stirring shaft:	40 Ncm
Display:	digital
Chuck range:	8 ... 10.5 mm
Dimensions (W x D x H):	70 x 195 x 281.5 mm
Weight:	2.3 kg
Power supply:	230 V, 50/60 Hz
Protection class:	IP 42

Accessories Accessories for Overhead Stirrers Hei-TORQUE Accessories Impellers for Overhead Stirrers Accessories Impellers VISCO JET®

With heating and ceramic hotplate which offers excellent chemical resistance.

• powerful motor for stirring quantities of up to 5l, 10l or 15l (H2O)
• fixed safety circuit of 550°C
• Hot Top indicator - hot surface warning to prevent burns
• exact temperature setting via digital display (LED)
• digital error code display
• elevated control panel for protection against spilled liquids

Specifikationer Magnetomrører
Omrørervolumen (H2O) C-MAG HS 4: C-MAG HS 7: C-MAG HS 10:	5 l 10 l 15 l
Motor effekt ind/ud:	15 / 1,5 Watt
Omrørerhastighed:	100 til 1.500 o/min
Hastighedsvisning:	Skala
Max. Magnetstav (L x Ø) C-MAG HS 4 C-MAG HS 7: C-MAG HS 10:	30 x 8 mm 80 x 10 mm 80 x 10 mm
Varmefunktion Temperaturvisning	digital
Varmeeffekt C-MAG HS 4: C-MAG HS 7: C-MAG HS 10:	250 W 1000 W 1500 W
Opvarmningshastighed (1 l H2O) C-MAG HS 4: C-MAG HS 7: C-MAG HS 10:	2,5 K/min 5 K/min 5 K/min
Temperaturområde:	50 til 500°C
Indstillingsnøjagtighed:	± 10 øC
Fast stikkerhedsafbryder:	550°C
Indstillingsnøjagtighed med føler: C-MAG HS 4: C-MAG HS 7/C-MAG HS 10:	- ETS-D5 / ± 0,5 K ETS-D6 / ± 0,2 K ETS-D5 / ± 0,5 K ETS-D6 / ± 0,2 K
Varmplade Materiale:	Glaskeramik
Dimensioner: C-MAG HS 4: C-MAG HS 7: C-MAG HS 10:	100 x 100 mm 180 x 180 mm 260 x 260 mm

Accessories Magnetic stirring bars Ikaflon®, cylindrical, PTFE Accessories Magnetic stirring bar set RS 1 / RS 2 Alternative Magnetic stirrers C-MAG MS 4 / C-MAG MS 7 / C-MAG MS 10 Alternative Magnetic stirrer C-MAG HS 7 Alternative Magnetic stirrer C-MAG HS 10

With heating and ceramic hotplate which offers excellent chemical resistance.

• powerful motor for stirring quantities of up to 5l, 10l or 15l (H2O)
• fixed safety circuit of 550°C
• Hot Top indicator - hot surface warning to prevent burns
• exact temperature setting via digital display (LED)
• digital error code display
• elevated control panel for protection against spilled liquids

Connection acc. to DIN 12878 for attaching a contact thermometer, e.g. ETS-D5; enables precise temperature control.

Accessories Magnetic stirring bars Ikaflon®, cylindrical, PTFE Accessories Magnetic stirring bar set RS 1 / RS 2 Alternative Magnetic stirrers C-MAG MS 4 / C-MAG MS 7 / C-MAG MS 10 Alternative Magnetic stirrer C-MAG HS 10 Alternative Magnetic stirrer C-MAG HS 4