Målecylindre

All LABSOLUTE® measuring and mixing cylinders made of borosilicate glass 3.3 comply with DIN EN ISO 4788. They are calibrated to "In" (20 °C) and have a solid hexagonal glass base for a secure stand.

With functional spout and batch number. A batch-specific certificate of conformity is available on request.

All LABSOLUTE® measuring and mixing cylinders made of borosilicate glass 3.3 comply with DIN EN ISO 4788. They are calibrated to "In" (20 °C) and have a solid hexagonal glass base for a secure stand.

With functional spout.

All LABSOLUTE® measuring cylinders made of PP or fully transparent PMP comply with DIN 12681 & ISO 6706 standards. They are calibrated to "In" (20 °C), have a solid hexagonal base for a secure stand, an embossed scale, as well as a functional spout.

All LABSOLUTE® measuring and mixing cylinders made of borosilicate glass 3.3 comply with DIN EN ISO 4788. They are calibrated to "In" (20 °C) and have a solid hexagonal glass base for a secure stand.

With functional spout.

All LABSOLUTE® measuring cylinders made of PP or fully transparent PMP comply with DIN 12681 & ISO 6706 standards. They are calibrated to "In" (20 °C), have a solid hexagonal base for a secure stand, an embossed scale, as well as a functional spout.

Dishwasher-proof and autoclavable. A batch-specific certificate of conformity is available on request.

Even after repeated autoclaving at 121 °C according to DIN EN ISO 285 the tolerances of class A are still maintained. Cleaning at max. 60 °C and the use of soft cleaning agents is recommended to preserve the embossed scale.

• Conformity certified with batch ID
• DIN EN ISO 4788
• Hexagonal foot with spout
• Calibrated to contain (IN)
• Inscriptions are printed with blue enamel
• Batch certificate can be downloaded from website

Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.

IN (TD) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.
For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).

• Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.
• They offer high transperency, chemical resistance and remarkable heat tolerance.
• They meet the highest quality standards according to DIN 12681 and ISO 6706.
• Individually calibrated through automatic calibration process carried out by robots.
• Permanent quality control through all steps eliminate possible deviations from nominal values.
• Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.
• Graduations are embossed and specially designed for plastic and resistant to 60°C.
• For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.

IN (TD) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.

With spout, tall form. Blaubrand^®. To DIN EN ISO 4788.
DE-M marking with works certified batch number. With spout and hexagonal foot. Graduations and inscriptions in highly contrasting blue enamel. Calibrated to contain (IN). All Blaubrand^® cylinders are delivered with batch number and batch certificate. Also available with individual works, USP, or DAkkS (former DKD) calibration certificate on request. The batch certificate is also available to download from the manufacturer's website.

Silberbrand Eterna. To DIN EN ISO 4788. With spout and hexagonal foot. Graduations and inscriptions in Eterna permanent amber stain. Calibrated to contain (IN).

• Silberbrand Eterna
• DIN EN ISO 4788
• With spout and hexagonal foot
• Graduations and inscriptions in Eterna permanent amber stain
• Calibrated to contain IN

IN (TC) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. With durable amber stain graduation, acc. to DIN EN ISO 4788.
For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.

Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.
Food-safe product according to regulation (EU) No. 10/2011.

IN (TC) calibrated. With spout and hexagonal glass base. Tolerances better than class B requirements. Short line graduation. With durable amber stain graduation, DIN EN ISO 4788.

Tall form. Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.

• DIN 12681 and ISO 6706
• Calibrated to contain (TC, In)

Tall form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

IN (TC) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. With durable amber stain graduation, DIN EN ISO 4788.

Tall form, with spout, transparent. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be permanently exceeded! Cleaning temperature below 60°C is recommended to preserve graduations and inscriptions. Food-safe.

Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60 °C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.

• DIN 12681 and ISO 6706
• DE-M marking
• With blue printed graduations and inscriptions

Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60°C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.

• DIN 12681 and ISO 6706
• DE-M marking
• With blue printed graduations and inscriptions