Haner og ventiler

Zur bestmöglichen Nutzung von Kanistern bietet CHEMSOLUTE® praktische Auslaufhähne.

• Auslaufgeschwindigkeit der Auslaufhähne: breiter Auslauss ca. 5 l/min, schmaler Auslass ca. 1,5 l/min

• Thread size UNF 1/4" 28G
• Luer Lock adapter
• PTFE Filter
• Valve membrane blocks vapours and opens at negative pressure
• It is recommended to replace the valve every 6 months
• With change indicator and labelling field for timely change

...

Lid with integrated ventilation openings and service life indicator. The filling of activated carbon is protected by two porous membranes made of PE. This allows an unobstructed flow of exhaust air, solvents are adsorbed by the activated carbon and only filtered air streams out....

Acc. to DIN 12541-1 and in addition to DIN standard, with PTFE plug and screwthread retaining device, one straight bore, leakage rate acc. to DIN 12540-1....

Angle valves with spindle (PTFE) and integrated fine thread enable very fine adjustment of the valve opening.

• Media only come into contact with Duran^® glass and PTFE
• Unscrewing protection prevents absolute unscrewing of the valve pin

Red/yellow. With connecting thread UNF ¼" 28G. Filter membrane made of PTFE/PP with a porosity of 1 µm and integrated non-return valve made of silicone. With service life indicator....

• Acc. to DIN 12554 and in addition to DIN standard
• Leakage rate to DIN 12540-1
• With solid glass plug or PTFE plug and screwthread retaining device

Screw cap for thread GL 45 made of PPS, freely turnable distributor body made of PTFE with female threads: UNF ¼" 28 G for connecting capillary tubing (O. D. 1.6, 2.3 or 3.2 mm) or NPT 1/8" for a hose connector for flexible tubing with I.D. 6.4 or 9 mm, GL 14 for connecting a b.safe exhaust filter (not included)....

For 250 µl RN needle syringes and larger. Port diameter 1.5 mm, Inert Gas Sampling Valve 1 mm....

For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.
Scope of suppy:
Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug, labelling field...

Acc to DIN 12541-1 and in addition to DIN standard. With solid glass plug and retaining device. Straight bore. Leakage rate acc. to DIN 12540-1....

Straight valves with spindle (PTFE) and integrated fine thread enable very fine adjustment of the valve opening.

• Media only come into contact with Duran^® glass and PTFE
• Unscrewing protection prevents absolute unscrewing of the valve pin

According to ISO 9002.DOT39 and EN12205.
Control valve not included, please order separately....

Three-way stopcocks (Czako) acc. to DIN 12563. Angled bore 120°, with solid glass or PTFE plug. Leakage rate to DIN 12540-1....

The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.

• Filter media with a very high performance spectrum for acids and alkalis
• Optimised for binding buffer solutions and solvent vapours
• With splash guard
• 1500 m²/g adsorption surface area

Brass / nickel. Bottom hinged....

...

...

Zum Anschluss von Schläuchen auf b.safe Waste Caps....

Screw caps with free movable insert made of PTFE. Depending on the version, for connecting capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives for tubing with I.D. 5.5 to 8 mm. A b.safe exhaust air filter can be screwed into the thread GL 14 (not included in the scope of supply).

Scope of supply:...

Zur Fixierung von Schläuchen in den Schlauchanschlüssen (Gewinde NPT 1/8“) von b.safe Caps....

The air valve blocks harmful vapours and ensures safe pressure equalisation in the storage tanks. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.

• With filter membrane
• Luer-Lock connection
• Change indicator

For Bürkle pumps and discharge stopcocks....

For StopCock spigots and ball valves....

Butterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10 ^-6 mbar x l/s. Excellent throughput....

• Conical spouts
• Resistant to compression max. 4 bar
• Operating temperature 0 to 40 °C
• With PP valve ball, on request also with ball made of stainless steel or PTFE

Stopcock with facetted tip, with solid NS plug, PTFE plug or PTFE spindle, material: borosilicate glass 3.3....

Made of DURAN ^® tubing. Smooth PTFE plug spindle, with retention device to avoid accidental dismantling. PP screw cap and retention device. Operating temperature -20°C to 150°C. Needle-valve stopcocks can be used for accurate dispensing and fit perfectly to glass apparatus....

Made of DURAN ^® tubing. With conical joint and PTFE stopcock....

...

For burette Economy....

For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.
Scope of supply:
Safety Cap, air valve, change indicator, PFA fittings, PTFE fitting, labelling field...

• Valve lever made of PP
• With integrated hose nozzles
• Good chemical resistance

• Valve lever made of PP
• With integrated hose nozzles
• Good chemical resistance

2-way- or 3-way stopcock system for infusion therapy and monitoring, for all current pressure infusion systems.

• Stopcock 180° or 360° turnable
• Luer-Lock port
• PVC and latex free

When laboratory ground devices are used under vacuum or/and slight overpressure, the use of this combined overpressure safety valve can be recommended. These valves act as immediately closing safety valve under vacuum and they allow under overpressure the visual control of the bubble formation in the blocking liquid. The real sealing is effected by a special designed spherical ground joint (cup and ball) on which an adjustable spring power acts. It is supported by a free to chose blocking liquid which should be higher viscous for vacuum operations. The sealed climbing tube at the spherical ground cup serves as a guide and prevents that the liquid climbs back into the apparatus. With standard stopcock, bore 3 mm....

When laboratory ground devices are used under vacuum or/and slight overpressure, the use of this combined overpressure safety valve can be recommended. These valves act as immediately closing safety valve under vacuum and they allow under overpressure the visual control of the bubble formation in the blocking liquid. The real sealing is effected by a special designed spherical ground joint (cup and ball) on which an adjustable spring power acts. It is supported by a free to chose blocking liquid which should be higher viscous for vacuum operations. The sealed climbing tube at the spherical ground cup serves as a guide and prevents that the liquid climbs back into the apparatus....

With PTFE key and screwthread retaining device. With two oblique bores. Leakage rate acc. to DIN 12540-1....

The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.

• Filter media with a very high performance spectrum for acids and alkalis
• Optimised for binding buffer solutions and solvent vapours
• With splash guard
• 1500 m²/g adsorption surface area

The Universal Waste Hub can dispose solvent waste from HPLC units and other waste liquids safely and without smelling. It consists of a funnel with hinged lid on a SafetyWasteCap with exhaust air filter, hose olives (PP) for tubing I.D. 5 to 11.5 mm and capillary connections.

• Funnel with sealing ring
• Removable sieve

With straight side arms or parallel side arms and hollow NS glass plug.
Leakage rate acc. to DIN 12540-1....

One-way, acc. to DIN 12545 / DIN 12554 and in addition to DIN standard, with right-angled side arm and hollow glass plug. Leakage rate to DIN 12540-1....

Acc. to DIN 12545 / DIN 12554 and in addition to DIN standard, T-shape, with right-angled side arms and hollow glass plug. Leakage rate to DIN 12540-1....