Forbindingsstoffer

Silicone.

Flanged neck with groove for vacuum use. Maximum 0.5bar working pressure at 250°C. Capacities indicated are brim-full volumes. We recommend that these beakers are heated in water or oil baths. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Flange in accordance with DIN 12214.

With four ground joint necks as outlined below. Centre neck NS 29/32. 1bar max. operating pressure at 250°C. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Flange with groove in accordance with DIN 12214.
Flask with thermostatic jacket and type "T" 10mm bore PTFE drain valve.
Form
A = cylindrical form
B = short form

Elastic silicone core with FEP coating. Autoclavable.

Holder for all PF- laboratory flasks for the alternating removal of vessel and lid. This special quick-release fastener ensures that the two laboratory flat flanges of reaction tube and flat flange lid are connected and, in addition, that the reaction tube and flat flange lid are held individually (optimal flange angle 45°). Without accessories.

Stainless steel. With retaining clips.

For fixing lids onto reaction vessels.

Flanged neck with groove for vacuum use. Capacities indicated are brim-full volumes. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Flanged neck with groove for vacuum use. Capacities indicated are brim-full volumes. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Suitable for glass reactors with SCHOTT flat flange DN 60, DN 100 and DN 150. All Reactor Lids dispose of a centric screw-in thread NPT for connection of a stirrer bearing. The lateral necks, that even dispose of NPT screw-in threads, are arranged round the centric connector. The angles of lateral necks are made for an insertion of probes and tubes aside the centre in order to avoid collisions with the stirrer shaft. With screw in threads for connection of transition fittings and a center neck NPT 1/2". Temperature resistance from -200°C to +250°C, universal chemical resistance, FDA conformity, further combinations on request.

B 150-02: NPT 1/4" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection aside the shaft
B 150-04: NPT 1/2" connection aside the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection aside the shaft
B 150-12: NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 1/2" connection directly to the shaft
B 150-14: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 3/4" connection aside the shaft, NPT 1/4" vertical connector
B 150-16: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 1/4" connection aside the shaft, NPT 1/4" vertical connector
B 150-22: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 1/4" connection aside the shaft, NPT 1/4" vertical connector
B 150-24: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 3/4" connection aside the shaft, NPT 1/4" vertical connector
B 150-26: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1" connection directly to the shaft, NPT 1/4" connection aside the shaft, NPT 1/4" vertical connector

• With graduation
• Laboratory flange LF
• With groove
• Two connectors with threads GL 14 or GL 18
• Made of DURAN^® tubing

• With graduation
• Laboratory flange LF
• Groove
• Flat bottom
• Two connectors with threads GL 14 or GL 18
• Made of DURAN^® tubing

For fixing lids onto reaction vessels and mounting on a stand,
Material: polyester-glass compound (clamp), steel (rod)

For metal or standard tubing connectors with secure, quick attachment / release, using spring insert technology.

Enables effective cleaning of chemicals and substances that turn from solids to vapours directly without liquidifying first and solidifying again on cooling. The cleaned sublimate can be fully recovered from the conical cooler without difficulty once the sublimation process is complete.

Flange with groove in accordance with DIN 12214.
Flask with thermostatic jacket, without base fittings.
Form
A = cylindrical form
B = short form

Flange in accordance with DIN 12214.
Flask with thermostatic jacket, Model "T" PTFE drain valve and evacuated, silvering on vacuum sleeve.

Flange in accordance with DIN 12214. Basic flask, without fittings.
Form:
A = cylindrical form
B = short form

Material: stainless steel. With KF socket, with thread.

Flanged tubing nozzles, aluminium. For Type KF small flange.