Sikkerhedsskabe

Aluminum, powder coated. For holding gas cylinders up to 230 mm diameter in a vertical position. For benches/worktops up to 60 mm thick. Rapid release, safety catch.

Designed for small facilities or installations in which a number of fume hoods are needed, this unit is excellent for use in schools, junior colleges and universities.

• One-piece shell molded of chemical resistant polyethylene with rounded inside corners for easy cleaning
• Clear acrylic sash slides on a track featuring stop pins for open, closed or intermediate positions; bottom gap allows for continuous air flow
• Front opening (W x H): 560 x 300 mm
• Stepped exhaust duct can be used with either a 12 or 15cm diameter duct
• Overall dimensions (W x D X H): 690 x 330 x 560 mm
• Shipping weight: 17 kg

• safe and approved storage of aggressive, non-flammable hazardous materials in workrooms
• robust construction and longevity, safety elements assembled outside the storage compartment for increased protection against corrosion, easy to clean
• safe storage with two hermetically separated storage compartments
• doors lockable with cylinder locking (integration in locking system possible)
• integrated adjusting aids to compensate for uneven floor
• integrated metal-free air ducts ready for connection (NW 75) to a technical exhaust system with only one extraction air Inlet
• pull-out shelves: high quality and sturdy construction with removable plastic sump, load capacity 25 kg (evenly distributed load), capacity 15 litre

Supplied with: Cabinet for acids and alkalis SL-CLASSIC incl. interior equipment, Model SL.196.120.MV with 8 or 12 pull-out shelves, Model SL.196.060.MH with 4 or 6 pull-out shelves

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) SL.196.120.MV: SL.196.60.MH:	1197 x 603 x 1965 mm 597 x 603 x 1965 mm
Inner dimensions (W x D x H) SL.196.120.MV: SL.196.60.MH:	2 x 485 x 570 x 1869 mm 2 x 485 x 570 x 914 mm
Weight SL.196.120.MV: SL.196.60.MH:	160 kg 125 kg

• safe and approved storage of non-flammable chemicals and toxic substances in workrooms
• robust construction and longevity, body made of sheet steel with high grade structured paint finish, colour: body anthracite grey RAL 7016, doors light grey (RAL 7035), door colour pure white(RAL 9010) available on request
• doors lockable with cylinder locking (integrated in the turning handle)
• integrated adjusting aids to compensate for uneven floor
• reduction of odours inside the cabinet with natural ventilation due to vent openings at the cabinet bottom
• doors optional with large glas openings for an optimal view on stored chemicals while doors are closed
• interior equipment sheet steel galvanised, pull-out shelf with sump made of PE

Shelves, height adjustable (25 mm increments), bottom collecting sump with perforated insert as a first storage level. Shelf load capacity (evenly distributed load): 100 kg (model width 1055 mm), 50 kg (model width 545 mm). Capacity bottom collecting sump: 33 litre (model width 1105 mm), 22 litre (model width 545 mm).

Supplied with: Cabinet for chemicals CS-CLASSIC Model CS.195.105 or CS.195.054 incl. interior equipment with 3 shelves, bottom collecting sump with perforated insert as a first storage area

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) CS.195.105: CS.195.054:	1055 x 520 x 1950 mm 545 x 520 x 1950 mm
Inner dimensions (W x D x H) CS.195.105: CS.195.054:	996 x 496 x 1835 mm 486 x 493 x 1835 mm
Shelf dimensions (W x D x H) CS.195.105: CS.195.054:	993 x 492 x 30 mm 484 x 492 x 30 mm
Weight CS.195.105: CS.195.054:	68 kg 46 kg

• Safe handling of chemicals, protection from hazardous vapours and potentially explosive atmospheres
• Suitable for Pharmacies
• Easily mounted on a table top
• Robust construction made of chemically resistant, antibacterial powder-coated sheet steel
• Testing of the air equipment by recognized test institute

Standard equipment:

• Exhaust air fan
• Monitoring electronics with visual and audible alarm
• Stepless height adjustable front sash made from acrylic glass
• Workplace light
• 2 sockets

Compact, energy saving fume hood without ducting system.

• Independently tested and complies with AFNOR NFX 15-211 standard
• Easy Filter Change
• Average Inflow Air Velocity: 0,4m/s
• Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock
• Fluorescent lighting provides superior illumination of the work zone
• Tempered glass sliding sash
• Tempered glass side panel
• ISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.
• Stainless steel worktop

Model variations:
Model type B: Pre-filter, main filter (activated carbon, different filter types available)
Model type C: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (activated carbon, different filter types available)
Model type E: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (HEPA filter)

Options on request:
Filter, electrical outlet, VOC sensor, service fixture, swan-neck faucet, Drip Cup (PP), support stand, installation

For operation the main filters and the back-up filter (Modell type C) have to be ordered separately.

Same user benefits as 12X series, with classical design and corrosive protection (optional).

Supplied with:

• Filtration box (Types H50 and CORG51) with "universal CORG charcoal filter"
• Retention shelves adjustable in height; retentions tanks; transparent framed doors
• Special protection for corrosives (optional)

• colour: grey RAL 7035
• exhaust air connection (NW75) on top of the cabinet
• adjusting aids to compensate for uneven floor
• large interior height of 1858mm (Model for two 10 litre bottles interior height of 1246mm)
• lead-through points for pipes, sensors etc. in the ceiling of the cabinet
• complete with mounting rails, rolling ramp, bottle retainer with ratchet straps

Approved and safe

• labelling in accordance with EN 14470-2, fire resistance of 90 minutes
• GS approved

To EN ISO 2503. Valve body and cap made of high quality, hot-pressed brass. Provide sensitive adjustment of working pressure. Safety valve blows off upwards.

For all common safety cabinets.
Fan extracts harmful and toxic vapors from the cabinet. The active charcoal filters out chemical fumes and recycles the air. Personal and environmental protection, no duct required.
Technical specifications:

• Vent-System and filter absorption capacity tested and approved NFX 15-211norm
• Built in 15/10 steel, covered with white Epoxy (RAL 9010) with blue stripes
• Specialised high efficiency super-activated charcoal filter, treated for the major common chemicals
• Noiseless fan: 43 dB(A), 220-240V, 50Hz, 47Watts, 0.2A, airflow 86m3/h
• Dust-protection pre-filter, efficiency 92% for particles < 3µm
• 3 connection inlets, diameter 100mm. Plug-and-use

• safe and approved storage of hazardous materials in workrooms
• type proved according to EN 14470-1, fire resistance 90 minutes
• GS-approved
• outer body made of flame retardant, melamine coated special plates, door front made of sheet steel with structured paint finish, colour: body anthracite grey (similar to RAL 7016), doors light grey (RAL 7035), door colour pure white (RAL 9010) available on request
• easy handling with comfort: doors stop in any position, self-closing in the event of fire
• standard door open arrest system holds doors open, safe and convenient storage and removal
• integrated transport base for an easy indoor transport
• removable base cover with integrated adjusting aids optional
• lockable doors with cylinder lock (integration into a locking system possible)
• ventilation connection (NW 75)in the cabinet ceiling

Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sump with perforated insert as a first storage level. Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm)
Supplied with: Safety Storage Cabinet Q-CLASSIC-30 Model Q30.195.116 or Q30.195.056 incl. interior equipment with 3 shelves, bottom collecting sump with perforated insert

Option:

• Recirculating air filter system with exhaust air monitoring (Cat. No. 9.840 650)
• Ventilation system with exhaust air monitoring (Cat. No. 6.238 986)
• Ventilation system without exhaust air monitoring (Cat. No. 9.840 616)

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) Q30.195.116: Q30.195.056:	1164 x 620 x 1947mm 564 x 615 x 1947mm
Inner dimensions (W x D x H) Q30.195.116: Q30.195.056:	1050 x 519 x 1626mm 450 x 519 x 1626mm
Shelf dimensions (W x D x H) Q30.195.116: Q30.195.056:	1040 x 432 x 30mm 440 x 432 x 30mm
Weight Q30.195.116: Q30.195.056:	240kg 146kg

• Safe and approved storage of hazardous materials in workrooms
• Type proved according to EN 14470-1, fire resistance 90 minutes
• GS-approved
• Outer body made of sheet steel, interior with chemical resistant surface, colour: body anthracite grey RAL 7016, doors light grey (RAL 7035), door colour pure white(RAL 9010) available on request
• Convenient handling: one-hand operation for double-door cabinets (AGT)
• Standard door open arrest system holds doors open, safe and convenient storage and removal
• Serial automatic door closing (TSA) releases arrested doors after approx. 60 seconds. Acoustic and visual signal before closing
• Lockable doors with cylinder lock (integration into a locking system possible), integrated locking state indicator (red/green)
• Integrated transport base with removable, optional base cover, easy indoor transport
• Adjusting aids for compensation for uneven floor
• Ventilation connection (NW 75) in the cabinet ceiling

Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sump with perforated insert as a first storage level. Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm)

Supplied with: Safety Storage Cabinet Q-PEGASUS-90 Model Q90.195.120.WDAC or Q90.195.060.WDAC incl. interior equipment with 3 shelves, bottom collecting sump with perforated insert

Option:

• Recirculating air filter system with exhaust air monitoring (Cat. No. 9.840 650)
• Ventilation system with exhaust air monitoring (Cat. No. 6.238 986)
• Ventilation system without exhaust air monitoring (Cat. No. 9.840 616)

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) Q90.195.120.WDAC: Q90.195.060.WDAC:	1193 x 615 x 1953mm 599 x 615 x 1953mm
Inner dimensions (W x D x H) Q90.195.120.WDAC: Q90.195.060.WDAC:	1050 x 522 x 1647mm 450 x 522 x 1647mm
Shelf dimensions (W x D x H) Q90.195.120.WDAC: Q90.195.060.WDAC:	1040 x 432 x 30mm 440 x 432 x 30mm
Weight Q90.195.120.WDAC: Q90.195.060.WDAC:	434kg 265kg

• safe and approved storage of hazardous materials in workrooms
• type proved according to EN 14470-1, fire resistance 90 minutes
• GS-approved
• outer body made of sheet steel, colour light grey (RAL 7035), interior with chemical resistant surface
• lockable doors with cylinder lock (integration into a locking system possible)
• adjusting aids for compensation for uneven floor
• ventilation connection (NW 75)in the cabinet ceiling
• standard door open arrest system holds doors open, safe and convenient storage and removal

Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sump with perforated insert as a first storage level. Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm).

Supplied with: Safety Storage Cabinet S-CLASSIC-90 Model S90.196.120.WDAS or S90.196.060.WDAS incl. interior equipment with 3 shelves, bottom collecting sump with perforated insert

Option:

• Recirculating air filter system with exhaust air monitoring (Cat. No. 9.840 650)
• Ventilation system with exhaust air monitoring (Cat. No. 6.238 986)
• Ventilation system without exhaust air monitoring (Cat. No. 9.840 616)

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) S90.196.120.WDAS: S90.196.090.WDAS: S90.196.060.WDAS:	1196 x 616 x 1968mm 896 x 616 x 1968 mm 596 x 616 x 1968 mm
Inner dimensions (W x D x H) S90.196.120.WDAS: S90.196.090.WDAS: S90.196.060.WDAS:	1050 x 524 x 1742mm 750 x 524 x 1742 mm 450 x 524 x 1742mm
Shelf dimensions (W x D x H) S90.196.120.WDAS: S90.196.090.WDAS: S90.196.060.WDAS:	1040 x 432 x 30mm 740 x 432 x 30 mm 440 x 432 x 30mm
Weight S90.196.120.WDAS: S90.196.090.WDAS: S90.196.060.WDAS:	420kg 310kg 260kg

• safe and approved storage of hazardous materials in workrooms
• Approved according to EN 14470-1, fire resistance 90 minutes
• GS-approved
• outer body made of sheet steel in light grey (RAL 7035), interior with chemical resistant surface
• space saving folding doors, less required space in front of the cabinet while doors are open
• convenient handling - one-hand operation for double-door cabinets (AGT)
• standard door open arrest system holds doors open, safe and convenient storage and removal
• serial automatic door closing (TSA) releases arrested doors after approx. 60 seconds. Acoustic and visual signal before closing
• lockable doors with cylinder lock (integration into a locking system possible)
• adjusting aids for compensation ofuneven floor
• ventilation connection (NW 75)in the cabinet ceiling

Model S90.196.120.FDAC and Model S90.196.060.FDAC with shelves:
Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sump with or without perforated insert as a first storage level
Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm)

Model S90.196.120.FDAC and Modell S90.196.060.FDAC with drawer:
Large storage capacity, optimal to maximize storage space, ideal for the storage of containers < 5 litre
Model width 1200 mm: self-closing in the event of fire, load capacity: 60 kg (evenly distributed), capacity 30 litre
Model width 600 mm: permanent self-closing, load capacity: 25 kg (evenly distributed), capacity 5 litre

Option:

• Recirculating air filter system with exhaust air monitoring (Cat. No. 9.840 650)
• Ventilation system with exhaust air monitoring (Cat. No. 6.238 986)
• Ventilation system without exhaust air monitoring (Cat. No. 9.840 616)

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) S90.196.120.FDAC: S90.196.060.FDAC:	1196 x 616 x 1968mm 596 x 616 x 1968 mm
Inner dimensions (W x D x H) S90.196.120.FDAC: S90.196.060.FDAC:	1050 x 524 x 1742mm 450 x 524 x 1742mm
Shelf (W x D x H) S90.196.120.FDAC: S90.196.060.FDAC:	1040 x 432 x 30mm 440 x 432 x 30 mm
Drawer (W x D x H) S90.196.120.FDAC: S90.196.060.FDAC:	844 x 488 x 90mm 345 x 500 x 50mm
Weight S90.196.120.FDAC: S90.196.060.FDAC:	420kg 260kg

The space saving vertical drawer Safety storage cabinets provide an overview and simple access to the stored containers. Safe and approved storage of flammable hazardous substances in working areas.

• Space saving vertical drawer
• Robust construction and longevity: stable, high quality and scratch proof cabinet body with powder-coated surface
• Electronic opening and closing
• Standard serial closing after approx. 60 seconds with visual and acoustic signal for drawer closure
• Lockable with cylinder lock (integration in an existing locking system possible) and locking state indicator (red/green)
• Adjusting aids to compensate for uneven floor
• Integrated air ducts ready for connection (DN 75) to a exhaust system
• Guard rail system (option)
• 2 different colour versions available: Light grey RAL 7035 and Pure white RAL 9010

Scope of supply versions:
1) Cabinet without interior equipment
2) Cabinet with 4 x shelfs (2,5-l bottles), 1 x perforated insert, 1 x bottom collecting sump
3) Cabinet with 5 x shelfs (1-l bottles), 1 x perforated insert, 1 x bottom collecting sump
4) Cabinet left / right: 4 x shelfs (2,5-l bottles), 1 x perforated insert, 1 x bottom collecting sump
5) Cabinet left / right with 5 x shelfs (1-l bottles), 1 x perforated insert, 1 x bottom collecting sump
6) Cabinet left: 4 x shelfs (2,5-l bottles), 1 x perforated insert, 1 x bottom collecting sump, right: 5 x shelfs (1-l bottles), 1 x perforated insert, 1 x bottom collecting sump

Option:

• Recirculating air filter system with exhaust air monitoring (Cat. No. 9.840 650)
• Ventilation system with exhaust air monitoring (Cat. No. 6.238 986)
• Ventilation system without exhaust air monitoring (Cat. No. 9.840 616)

Specifications	V90.196.045.VDAC // V90.196.081.VDAC
Outer dimensions (W x D x H):	450 x 863 x 1966 mm // 819 x 863 x 1966 mm
Internal dimensions (W x D x H):	331 x 773 x 1750 mm // 701 x 773 x 1750 mm
Net weight (corpus):	344 kg // 500 kg

Steel bottle cart with solid rubber tyres Ø 200 mm and powder coated black-silver.
Bottle holder with chain protection. Wheels: metal rim, roller bearing.

• Increased protection of drawers when storing mildly aggressive liquids and in case of a leakage
• Removable for safe disposal of leakages and easy cleaning

According to ISO 9002.DOT39 and EN12205.
Control valve not included, please order separately.

• Safe and approved storage of hazardous materials in workrooms
• Type proofed according to DIN EN 14470-1, fire resistance 90 minutes, GS approved, CE conformal
• Mobile: integrated castors with plinth, easy moving of the cabinet
• Quickly put into operation: integrated air ducts ready for connection (NW 50) to a technical exhaust system
• Safe access to all containers: interior of the drawer is completely visible, 135° opening of the wing doors
• Convenient: doors and drawer remain open in any position
• Safety: drawer standard fitted with earthing wire incl. clamp and with seal welded sump, doors and drawer are self-closing in the event of a fire
• No unauthorised use: doors and drawer are lockable with cylinder locking and locking state indicator (red/green)

Scope of delivery: Models UB90.060.059.S and UB90.060.110.S incl. drawer with sump and perforated insert, Model UB90.060.059.T incl. bottom collecting sump and perforated insert as a storage level

Further cabinet versions available on request.

Specifications
Outer dimensions (W x D x H) UB90.060.059.S/UB90.060.059.T: UB90.060.110.S/UB90.060.110.2T:	593 x 574 x 600 mm 1102 x 574 x 600 mm
Inner dimensions (W x D x H) UB90.060.059.S/UB90.060.059.T: UB90.060.110.S/UB90.060.110.2T:	470 x 450 x 500 mm 980 x 450 x 500 mm
Sump (W x D x H) UB90.060.059.S: UB90.060.110.S:	422 x 441 x 80 mm 930 x 441 x 80 mm

Manipulation of liquid chemicals and powders where and when needed.
Advantages: eliminates installation costs, saves substantially capital and running costs, mobile and easy to relocate wherever needed; protects the user and environment against toxic fumes. Low Energy consumption: less than 200 KWh /year (for 2100 hours usage)

Choice of activated charcoal filters (Please order separately!):

• "ORG" filter for flammables and organics
• "CORG" filter suitable for the most common laboratory chemicals, for organic and corrosive vapors
• "FOR" filter for formaldehyde vapors
• "AMM" filter for ammonia vapors
• HEPA filter "HEP": for Particle
• Frame for HEPA filter "SH"

Standard equipment:

• Built in 15/10 steel, covered with white Epoxy (RAL 9010) with blue stripes
• HPL or tempered glass worktop on removable retention tank (optional)
• Transparent PMMA glazed walls on all four sides for comfortable working or lectures
• Ergonomic hand traps or trapeze opening
• 4 protective caps for easy use of external supplies (e.g. power cables, water, gas)
• Air velometer; sampling outlet for reactive tube measurement

Recirculating air filter system (CLASS 2) and coal filters Norm NFX 15-211

• Noiseless fan: 57 dB(A), 220-240 V, 50 Hz, 10 W, 0.1 A
• Air flow: 170 m³/h; face velocity: 0.4 to 0.6 m/s
• Ventilation system with lighting control in case of system failure

Please choose fume hoods, charcoal filters, trolleys and accessories according to your needs. Delivered mounted.
The fume hood will be delivered without bottom retention tank and work top.
Charcoal filter "ORG": for organic vapors
Charcoal filter "CORG": for organic and corrosive vapors (suitable for the most common laboratory chemicals)
HEPA filter "HEP": for Particle
Frame for HEPA filter "SH"

For models with 2 fans, please order 2 charcoal filters or rather HEPA filters with additional frame.
For models with 3 fans, please order 3 charcoal filters or rather HEPA filters with additional frame.

Safe and regulation-compliant storage of non-flammable chemicals and poisons in workrooms

3 cabinet widths, 2 different cabinet heights, 3 door variants, 7 different door colours and countless interior fitting variants are available. Please contact us.

• high-grade steel plate body with sturdy, high-quality structured paint finish
• 7 different door colours at no extra cost
• doors with safety cylinder integrated into the turning handle
• prepared for connection (NW 75) to an extraction system on the cabinet's ceiling
• integrated adjustable feet, easy to align
• natural ventilation thanks to vent openings in the floor region
• optionally galvanised or painted shelves (RAL 7035 light grey), height adjustable (grid size 25mm)
• watertight, zinc plated bottom collecting sump, optionally included according to STAWA-R
• pull-out drawers with plastic sump

Specifications Type CS.110.105-A
External dimensions (W x D x H):	1055 x 520 x 1105mm
Weight:	42kg
Max. Loading (each shelf):	100kg
Design:	wing doors with windows
Interior:	2 zinc-plated shelves, perforated insert, zinc-plated bottom collection sump
Colour:	red (RAL 3020)

Combined and unrestricted storage of flammable and aggressive hazardous materials in working areas in accordance with EN 14470-1

• type-tested in accordance with EN 14470-1
• fire resistance of 90 minutes (type 90)
• GS-tested
• two in one: 2 compartments (vertically separated) allow the storage of flammable liquids and aggressive chemicals in one cabinet
• robust construction and longevity: body made of powder - coated sheet steel, safety elements assembled outside the cabinet for increased protection against corrosion
• user-friendly and safe (folding door compartment): door open arrest system (standard), convenient and safe removal or storage of containers
• no unauthorised use: doors lockable with profile cylinder (integration in an existing locking system possible)
• easy alignment: adjusting aids to compensate for uneven floor
• ventilation: integrated air ducts ready for connection (DN 75) to a technical exhaust system

Model K90.196.120.MF.FWAS in Light grey (RAL 7035), interior equipment with 6x drawer, 1x bottom collecting sump (sheet steel powder-coated), 6x pull-out shelf (melamine / PP) extraction unit (Cat. No. 9.840 616) optional

Extraction unit Safe ventilation of safety storage cabinets, plug-in 13 fast and easy to install

• Safe and approved storage of hazardous materials in workrooms
• Type proofed according to DIN EN 14470-1, fire resistance 90 minutes
• GS approved
• Body made of sheet steel plastic laminated, structure finish
• Colour: Body anthracite grey (RAL 7016) doors light grey (RAL 7035), door colour pure white (RAL 9010) available on request
• Convenient handling with comfort, doors stop in any position, self-closing in the event of a fire
• Doors lockable with cylinder lock (suitable for master-key system) and locking state indicator (red/green)
• Integrated transport base, optional base cover
• Integrated adjusting aids to compensate for uneven floor
• Exhaust air connection (DN 75) on top of the cabinet

Height adjustable shelves (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sump with perforated insert as a first storage level. Capacity of the bottom collecting sump: 33 litre (cabinet width 1193 mm), 22 litre (cabinet width 599 mm)

Scope of delivery: Safety storage cabinet model Q90.195.120 or Q90.195.060 incl. interior equipment with 3 shelves, bottom collecting sump and perforated insert

Option:

• Recirculating air filter system with exhaust air monitoring (Cat. No. 9.840 650)
• Ventilation system with exhaust air monitoring (Cat. No. 6.238 986)
• Ventilation system without exhaust air monitoring (Cat. No. 9.840 616)

Many further cabinet versions available.

Specifications
Outer dimensions (W x D x H) Q90.195.120: Q90.195.060:	1193 x 615 x 1953mm 599 x 615 x 1953mm
Inner dimensions (W x D x H) Q90.195.120: Q90.195.060:	1050 x 522 x 1647mm 450 x 522 x 1647mm
Shelf dimensions (W x D x H) Q90.195.120: Q90.195.060:	1040 x 432 x 30mm 440 x 435 x 30mm
Weight Q90.195.120: Q90.195.060:	434kg 265kg

Replacement belt for fastening a gas cylinder in the holder.