Masa santrifüj

Small centrifuge for the determination of fat in milk and dairy products acc. to Gerber or Babcock.

• Microprocessor control with actual display in minutes and seconds, adjustable from 1 to 99 minutes
• Heating with 2 segment advertisements, adjustable from 0 to 65 ° C
• Increased precision thanks to the controlled speed
• Unbalance shwitch-off in case of uneven filling or sudden glass breakage
• Incl. Rotor (aluminium) and bushing (brass)

These low-speed, universally applicable centrifuges are especially suited for low to medium sample throughput in cell culture applications.

• Extremely compact with small footprint
• Maintenance-free motor
• Dial controls and digital display
• Powered lid locking
• Short braking time
• Automatic lid opening (model 5702 only
• Rotor bowl made of stainless steel
• Optimized: backwards adjusted air flow for sample cooling

• Two programme keys for saving the parameters of two standard centrifugation processes
• Adjustable acceleration rate and braking
• Temperature setting from -9 °C to 40 °C
• Stand-by cooling
• Fast-temp-function

• Software control for precise temperature control (depends on rotor)
• Active heating
• Stand-by heating
• Temperature derivation in stationary state at 4°C and at 37 °C ±1 °C

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• 48 places for 1.5 / 2 ml tubes
• Max. speed: 19083 x g (max. 13000 rpm)
• QuickLock rotor lid
• Rotor and lid are autoclavable (121 °C, 20 min)
• Aerosol-tight

• For 6 x 8, 6 x 5 PCR tube strips, 48 x 0.2 ml individual PCR tubes
• Max. speed: 15294 x g (max. 12000 rpm)

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed: 3220 x g (max. 4000 rpm)
• Buckets, caps and adapters are all autoclavable (20 mins. at 121 °C)
• Only for 5810 / 5810 R

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• 30 place x 1.5 / 2 ml reaction tubes
• Max. speed 20800 x g (max. 14000 rpm)
• Rotors, lids and adapters are all autoclavable (20 mins. at 121 °C)
• Aerosol-tight centrifugation possible with rotor FA-45-30-11

Universal centrifuge for routine applications. Motorised lid latch enables one finger downward motion for easiest closing and locking of centrifuge lid.

• Intuitive touchscreen
• Auto-Lock™ Rotor exchange: Secure, ergonomic push-button rotor exchange in as little as 3 seconds
• ClickSeal™ Bucket Sealing System: System has glove-friendly, one-handed open/close capability
• SMARTSpin™ Technology: optimises the acceleration and braking process and compensates imbalances
• Front USB port

Microcentrifuge for standard molecular biology applications. The 18-position rotor is specially designed for low to medium volumes in 1.5 / 2.0 ml tubes and Microtainer^®. The compact centrifuge with low access height is characterized by extremely quiet operation.

• 18 place rotor for 1.5 / 2.0 ml tubes
• Lid opens automatically after spinning
• Very small profile, minimal bench space required
• Remarkably silent, even without rotor lid
• Standard, certified aerosol-tight rotor
• Convenient Eppendorf two-dial operation
• rpm/rcf converter
• Short-spin
• The patented compressor technology reduces vibration to a minimum
• Temperature range: 0 °C to 40 °C
• Low access height of 26 cm
• Keeps a constant 4 °C at max. speed
• Fast Temp for rapid pre-cooling of the centrifuge

Including Rotor lid.

FA-45-24-11
Certified aerosol-tight rotor for 24 x 1.5ml /2.0ml microcentrifuge tubes comes standard (max. 20238xg). Perfect for standard applications and centrifugation of biohazardous or radioactive samples. Aerosol-tight rotors are easily identified by a red lid screw.
FA-45-24-11-Special
Certified aerosol-tight rotor for 24 x 1.5ml /2.0ml tubes with special PTFE-coating for improved chemical resistance (e.g., when working with phenol or chloroform) and easy cleaning (max. 20238xg). Aerosol-tight rotors are easily identified by a red lid screw.
F-45-18-11-Kit
Innovative 18-place rotor for miniprep spin columns and 1.5/2.0 ml tubes. Designed with an extra high rim to support open tube lids during centrifugation, no more torn off lids (max. 18111xg).
F-45-32-5-PCR
Rotor for 4 x 8-tube PCR strips or 32 x 0.2ml PCR tubes quickly knocks down liquids and properly supports thin-walled PCR tubes (max. 18615 xg).

Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes^® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes^® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).

Microcentrifuge 5430

• Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility
• 48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon^® tubes or 2 x MTP plates
• Unique 30 130xg
• Automatic rotor recognition
• Stores up to 50 routine programs
• Menu guided operation in 4 different languages
• Automatic lid opening following application sequence (only 5430)

• Temp. range: -11°C to +40°C
• +4°C at max. speed with all rotors
• Continues cooling after the centrifugation process
• Fast Temp for achieving required temperature in shortest possible time
• Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time