-
- Sarf malzeme
- İş Sağlığı Güvenliği
- Analitik ölçüm ve test
- Karıştırma, Çalkalama, Karma
- Numune hazırlama
- Damıtma, ayırma, filtreme
- Isıtma ve soğutma teknolojisi
- Liquid Handling
- Vakum teknolojisi
- Optik aletler ve mikroskoplar
- Temizlik ve sterilizasyon
- Çevre, toprak, su ve gıda analizi
- Kromatografi
- Temiz Oda
Örnekleyici, sıvılar
Micro-Sampler, stainless steel
Without tip. V2A stainless steel. Sterilizable. GMP/FDA compliant. Specially for collecting small amounts of powder. Volumes of 0.2, 0.5, 1, 2, 5 and 10 ml can be taken simply, quickly and cleanly from different depths of sacks or containers. The Micro-Sampler tips are interchangeable so that tips with different volumes can be used....
Zone samplers, Novartos Multi, stainless steel V4A
With Novartos Multi double and triple zone sampling, multi-point samples can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine collection chambers are equipped with two or three sample inserts each. It is possible to withdraw a multiple sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way. Withdrawal of a sample can be prevented at certain points with blind inserts (0.0 ml)....
Zone samplers, Novartos Uno, stainless steel V4A
With the Novartos Uno sampler, target point samples can be taken from a predefined sample zone. Therefore the sample chambers are fitted with two or three sample inserts. It is possible to withdraw a double- or triple-sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way....
Withdrawal systems for solvents, stainless steel
Operation with compressed air or inert gas (e.g. nitrogen), which creates an overpressure in the container. Hazardous media can be safely dispensed and accurately metered using the stopcock.
- For UN tanks and barrels (test pressure at least 150 kpa)
- Variable inlet pressure between 3 and max. 10 bar
- No escape of vapours containing solvents due to stopcocks
- Wetted parts are made of stainless steel and PTFE
- Transportable or permanently mountable
Sampler QualiRod, stainless steel
Conical hand-drill, conically shaped, with sharp cutting edges and a solid handle. Ideal for cutting out samples for quality control from soft, paste-like substances (cheese, butter, clay, soap, wax, etc.).
- Stainless steel (1.4028)
- Sterilisable
- According to EN/ISO 707
Angled sample beaker, stainless steel
A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to
- quick and easy exchange of the sample taking equipment
- simple change by pressing the spring mechanism
- extremely strong fiber glass telescopic poles, non-corrosive
- for up to 20 different sample taking devices
- four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length
Suction sampler, Mini ViscoSampler
For viscous media such as pastes, sludge, creams, oils, e.g. for pharmaceutical and cosmetic industry. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm (supplied with 2 mm drill tip).
- Electropolished V4A stainless steel
- Piston made of PTFE
- Sterilizable