Kompressorer och kolvpumpar

The portable piston pump LLG-uniVACUUPUMP 1 has been developed for vacuum and pressure applications in the laboratory, in particular in the field of Life Science. Typical applications for this low-cost vacuum pump are the single funnel filtration of aqueous and buffered solutions, SPE, as well as any applications where no harmful gases are conveyed. The LLG-uniVACUUPUMP 1 operates oil-free and can also be used as a compressor to a pressure up to 3.3 bar. This allows you, for example, pressure filtration, if vacuum filtration is not sufficient.
Not recommended for pumping organic, acidic, or basic vapours.

Advantages:

• Dry-running technology for physical applications
• Can be used as a vacuum pump and compressor
• Cost-effective alternative for water pumps
• Sound suppressor for quiet operation
• Compact, light weight and portable
• Oil-free, suitable for continuous operation
• Suction/pressure connection: hose nozzle DN 6 for hose inner diameter 6 mm

Micrometer screw with push-button, incl. support clamp.

Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10^-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.

The chemical-resistant version VACUU·PURE^® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.

• For ultra-clean processes and pure products
• 100% oil-free due to cantilevered spindles
• Abrasion-free due to contact-free operating principle
• No wear parts
• Quick drying after high condensate load
• Suitable for continuous operation
• With air cooling
• Rotatable inlet
• With Modbus RTU interface