Temperatur data logger

Applications:

• Transport
• Storage monitoring
• Refrigeration areas and cold rooms

Features:

• Waterproof
• Visual alarm
• Max / min values on display
• Stores 40000 readings, can be read off at any time
• Replaceable battery

Scope of supply:
EBI 20-T1: Temperature Logger
EBI 20-T1-Set: Temperature Logger, evaluation software, Interface
EBI 20-TE1: Temperature Logger with external probe
EBI 20-TE1-Set: Temperature Logger with external sensor, evaluation software, Interface

Specifications
Measuring range temperature:	-30 to +70 °C
Accuracy temperature:	±0.5 °C (-20 to +40 °C); ±0.8 °C for remaining measuring range
Resolution temperature:	0.1 °C
Memory:	40000 samples
Sensor:	NTC
Operating temperature: Storage temperature:	-30 to +70 °C -40 to +70 °C
Measuring period:	1 minute to 24 hours
Measuring mode:	immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressed
Power supply:	3 V lithium (CR 2450), can be replaced by user
IP code:	IP 67
Housing :	ABS
Dimensions (L x W x H):	69 x 48 x 22 mm
Weight:	approx. 45 g

Data logger with integrated USB interface for temperature recording. Ideal for monitoring storage and transport conditions in accordance with HACCP (EN 12830).

• Incl. calibration certificate
• Memory for 60 000 readings
• Usable without software (pre-programmed 15-minute reading interval)
• Freely adjustable memory interval from 30 seconds to 24 hours (via free Log Connect software)
• Automatic output as PDF file (logger is recognized like USB memory stick)
• Battery lifetime > 3 years (with recording interval >15 minutes)
• Status and alarm LEDs with acoustic signal (buzzer)
• Wall mount included
• EN12830 compliant
• IP65 waterproof

Specifications
Measuring range:	-40 ... +70°C
Accuracy:	±0.5°C (-10 ... +40°C), otherwise ±1.0°C
Resolution:	0.1°C
Memory:	60 000 measurements
Interface:	USB (integr.)
Housing:	ABS
Dimensions (L x W x H):	100 x 19 x 19mm
Weight:	70g
Battery:	1 x 3.6 Volt Lithium ½ AA

Alternative Data logger LOG32THP

Temperature-humidity-pressure logger with integrated USB-interface and automatic PDF-creation.

• Incl. calibration certificate
• Memory for 3 x 60000 readings
• Useable without software (pre-programmed reading interval of 5 minutes)
• Automatic output as PDF file (no drivers required)
• Free adjustable recording interval from 30 seconds up to 24 hours (via Software Log Connect)
• Battery life > 2 years (with recording interval >15 minutes)
• Status and alarm LEDs
• With wall mount, fixing screws, an battery (1/2 AA, 3.6 V)

Specifications
Measuring range:	-40 ... +70 °C, 0 ... 99 %rh, 300 ... 1100 hPa
Accuracy:	±0.5 °C (-10 ... 40 °C) ± 3 % (40 ... 60 % rh), ±1 hPa (900 ... 1100 hPa) otherwise 0.5 %
Resolution:	0.1 °C / 0.1 %rh / 0.1 hPa
Memory:	3x 60 000 measurements
Interface:	USB (intergr.)
Housing:	ABS
Dimensions (L x W x H):	102 x 20 x 21 mm
Weight:	70 g
Battery:	1x 3.6 V lithium 1/2 AA

Alternative Data Logger LOG32T

The single-use data logger TempMate-S1 with its built-in USB connector, is the ideal solution for low-cost temperature monitoring of transports. TempMate-PDF loggers directly useable with pre-programmed configuration or reprogrammable with Tempbase Software according to each customer's specifications. To download the recorded data, simply connect TempMate-S1 directly to the USB port. A PDF and CSV report will automatically be generated, covering temperature graph, detailed data list and statistical information. No hardware (cable, interface) or software is required.

• Auto generating PDF and CSV format data report
• 110 days run time 16000 measurements, 10 minuteinterval
• Reprogrammable with Tempbase Software free of charge
• Up to 5 alarm points configurable
• Integrated USB connector
• LED Alarm indicators
• Serial number sticker
• Inclusive certificate
• Food proof according to HACCP

Specifications
Temperature range:	-30 ... 70 °C
Accuracy:	±0.5 °C at -20 ... +40 °C / ±1.0 °C in remaining range
Resolution:	0.1 °C
Data memory:	16000 measurements
Recording cycle:	110 days
Sampling interval:	10 min
Shelf life:	24 months
Dimensions (L x W x H):	80 x 47 x 7 mm
Weight:	14.6 g
IP code:	IP 67 / NEMA 6
Certifications:	Calibration Certificate, EN 12830 S, T, C, D, 1

Adapter for EBI 310 to measure two temperatures parallel. Please order 2 sensors separatly.
Further sensors available on request.

Specifications TPX 310
Measuring range (sensor):	-200 to +400°C
Working range (logger):	-30 to +70°C
Accuracy:	±2.0°C to -200 to -100°C ±1.0°C to -100 to -20°C ±0.2°C to -20 to +60°C ±0.5°C to +60 to +250°C ±1.0°C to +250 to +400°C
IP code:	IP 65
TPX 310-P1
Measuring range:	-200 to +200°C
Cable:	PTFE, 3 meters

Accessories High Precision PDF Data Logger EBI 310

Wireless temperature data logger for low temperatures. With external temperature sensor.

• Measuring range down to -200 °C
• External temperature sensor with 3 m cable
• Readout via wireless interface
• Replaceable battery
• High protection class IP67
• LCD display
• Memory for 288 values

The IF 400 base station and the Winlog.web / Winlog.wave PC software (see "Accessories for EBI 25 data loggers) are required for programming and evaluating the EBI 25-TX data logger.

Scope of supply: temperature data logger, operating manual

Specifications
Sensor: Channels: Measuring cycle:	PT1000, Binder series 620 1 1 min. ... 24 Hrs. user defineable
Measuring range:	-200 ... 199.9 °C
Accuracy (±1 digit):	±2.0 °C (-200 °C ... -100 °C) ±0.5 °C (-100 °C ... -20 °C) ±0.2 °C (-20 °C ... 60 °C) ±0.5 °C (60 °C ... 199.9 °C)
Resolution:	0.1 °C
IP code:	IP 67
Battery life:	approx. 2 years
Operation and storage temperature:	-30 ... 60 °C / -40 ... 85 °C
Dimensions (W x D x H):	48 x 27 x 95 mm
Power supply:	1 x Lithium battery 3.6 V, replaceable

Accessories Accessories for EBI 25 data loggers Alternative Wireless temperature data loggers EBI 25-T/TE

PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.

• Automatic pdf-report creation with temperature/time values
• Transport of drugs, inoculants, blood products and primary products
• Transport of all temperature sensitive products
• Storage of reference samples in refrigerators and deep-freezers
• "Traffic light principle" by limit exceeded
• IQ/OQ procedures through standardized software and standard reporting process possible
• GMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)
• Programmable via the free online configurator at www.ebi300.com

EBI 310: Data logger with internal temperature sensor
EBI 310 TE: Data logger with external precision temperature sensor, internal temperature sensor can be used additionally. Measurements in high and low temperature range
EBI 310 TH: Data logger with external humidity and temperature sensor, internal temperature sensor can be used additionally. Monitoring the relative humidity in storage and transport
EBI 310 TX: Data logger with temperature dual adapter for two exchangeable temperature sensors (not included in the scope of supply), internal temperature sensor can be used additionally

Specifications
Ambient temperature: Measuring range temp. EBI 310 / 310 TH: Measuring range temp. EBI 310 TE:	-30 to +75 °C -30 to +75 °C -200 to +250 °C
Measuring range humidity EBI 310 TH:	0 to 100 % rh
Accuracy temperature:	± 0.2 °C (-30 to +30 °C); ± 0.5 °C for remaining range
Accuracy humidity EBI 310 TH:	± 3 % (10 to 90 % rh)
Resolution temperature / humidity:	0.1 °C / 0.1 % rh
Memory capacity: Sensor:	120,000 measurements Pt1000/NTC
Battery life time:	up to two years
Measuring period:	1 s to 24 h
Maximum start delay:	72 h
Housing material:	Polycarbonate
Measuring modes:	Start/Stop, endless loop, start with button
Alarms:	5 values
Weight:	35 g
IP code:	IP 65

PDF data logger with different temperature sensors.

• For temperature monitoring related to HACCP / IFS issues or other perishable goods
• Transportation of fresh, cool and deep cool products
• Monitoring of fridges and deep freezers
• Evaluation without software, PDF are automatically generated
• Minimise training, user errors and IT costs using EBI 300's simple, easy to use design and standard software
• Ensure data integrity since no data manipulation is possible
• EN 12830, ATP, VO(EG) 37/2005 Compliant
• Factory calibration certificate included
• Programmable via the free online configurator at www.ebi300.com
• No separate interface for programming and reading

EBI 300: PDF data logger with internal temperature sensor
EBI 300 TE: PDF data logger with external temperature sensor, internal temperature sensor can be used additionally
EBI 300 TH: PDF data logger with external humidity and temperature sensor, internal temperature sensor can also be used

Specifications
Ambient Temperature: Measuring range Temp. EBI 300 / 300 TH: Measuring range Temp. EBI 300 TE:	-30 to +70 °C -30 to +70 °C -35 to +70 °C
Measuring range Humidity EBI 300 TH:	0 to 100 % rF
Accuracy Temperature:	±0.5 °C (-20 to +40 °C), ±0.8 °C for remaining range
Accuracy Humidity:	± 3 % (10 to 90 % rh), ± 5 % for remaining range
Resolution Temperature / Humidity: Memory: Sensor:	0.1°C / 0.1 % rh 40,000 samples NTC for temperature
Battery life time:	up to two years
Measuring period:	1 minute to 24 hours
Maximum Start Delay:	72 h
Housing material:	Polycarbonate
Measuring modes:	Start/Stop, endless loop, start with button
Alarms:	2 values, high and low limits
Weight:	35 g
IP code:	IP 65

Large display for actual value, battery status display, easy to use software. Perfect designed instrument for monitring transportation or storage after HACCP.

• Quality surveillance in laboratories, at the production or in the storage
• Ambient conditions in manufacturing facilities
• Ambient conditions in power plants
• Monitoring of fridges for the pharma industry
• Memory for 60000 data sets
• Waterproof IP 65

Please order Software with USB-Cabel separately (9.726 413).

Specifications	LOG100 // LOG100 Cryo
Measuring range int.: Measuring range ext.:	-30 ... 70 °C // -10 ... 70 °C -50 ... 125 °C // -200 ... 350 °C
Accuracy:	0.1 °C
Precision:	±0.5 °C (-20 ... 50 °C), otherwise ±0.7 °C // Int.:±0.3 °C (-20 ... 50 °C), otherwise ±0.7 °C, Ext.: ±0.5 °C (-200 ... 250 °C), otherwise ±1.0 °C
Housing:	Plastic (ABS)
Battery:	1 x CR2032
Dimensions:	92 x 55 x 21 mm // 88 x 55 x 20 mm
Weight:	95 g
Alarm function:	Alarm for too low or too high temperatur and/or humidity values Calibration reminder