Ampuller, Septa

Short thread vials and micro-vials ND9 are available in clear and amber first hydrolytic class glass and can be used on almost all autosamplers. You can replace other 1.5 ml vial types like 11 mm crimp neck vials, 8-425 and 10-425 screw neck vials, which can help rationalize stocks.

The wide opening requires matching micro-inserts with 6 mm diameter.

Due to the technical geometry, the vails can be used on all common autosamplers, but preferentially on instruments made by Agilent, HTA, Shimadzu, Thermo Scientific, Varian and Waters.

Screw neck vials ND13 with 13-425 thread made of clear and amber first hydrolytic class glass facilitate easy filling with viscous substances thanks to their wide opening.

The LABSOLUTE® vials for optimised micro-sampling are the best solution for very small sample volumes.

Crimp neck vials and micro-vials ND11 made of clear and amber first hydrolytic class glass are used as standard in GC and HPLC. A large selection of micro-inserts is available for these vials.

Snap ring vials and micro-vials ND11 made of clear and amber first hydrolytic class glass can be used on almost all autosamplers and can also be used on equipment with robotic handling.

As an alternative to snap ring seals, snap ring vials and micro-vials, ND11 can also be sealed with crimp seals ND11 since the two snap ring lips together have the same height as a crimp neck.

Vials with snap ring seal are only recommended for HPLC.

Screw neck vials and micro-vials ND8 are available in clear and amber first hydrolytic class glass. They have a 8-425 thread and are used as standard in GC and HPLC applications. A large selection of micro-inserts with a 5 mm diameter is available for these vials. The micro-vials often require an adapter so that they can be used in an autosampler.

These vials are especially used with autosamplers made by Beckman, Shimadzu, Spark, Varian and VWR/Hitachi.

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Screw neck vials ND10 with 10-425 thread facilitate easy filling with viscous substances thanks to their wide opening. The vials are available in clear and amber first hydrolytic class glass.

The transparent PE caps fit perfectly to the snap cap vials ND18 / ND22 / ND28.

Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Snap cap vials ND18/ND22 are made of clear third hydrolytic class glass. They are easy to handle and can be opened and sealed very quickly. Transparent PE caps have to be ordered separately.