Tillbehör för spåranalys

With PTFE coated silicone seal. Colourless (to avoid risk of leaching) and temperature resistant from -196 °C to 200 °C. Ideal for dry sterilization. USP/FDA standard conformity. DFM available on request. Autoclavable. With Retrace code (Batch Identification). Certificate available via the internet.

Colourless pouring ring TpCh260, height 4mm. Temperature resistant from -196°C to +260°C.

Ultra-pure, virgin PTFE chips promote gentle, efficient boiling and help prevent overheating, even of highly volatile liquids. Ideal for continuous extraction methods. Stones minimize "bumping" during reflux and distillation. The boiling stones are not affected by acids, hydrocarbons, ketones, esters, alcohols or alkalis. They are easily cleaned and non-contaminating. Shows no trace of face acidity or alkalinity. They will not scratch or abrade glassware and leave no residue. Usable up to 288°C.

• Chemical resistant
• Ideal for boiling organic liquids
• Minimizes superheating

These spatulas are designed for use in the most severe laboratory conditions. They are made of nickel-plated stainless steel and fluoropolymer coating. The coating eliminates surface buildup or loss of valuable sample due to sticking. Will not scratch or damage delicate surfaces.

• Extra heavy-duty PTFE coatings
• Resistant to low and high temperatures
• Use for handling chemically active materials

Forceps are made of nickel-plated steel and have an extra heavy-duty coating of PTFE. The forceps have the same great features as the spatulas and tongs.

• Ridged grips prevent slips
• Inner pin retains closed position
• Rounded precision tip for accuracy and safety

Capillary tubes for melting point analysis. Clear glass, different diameters and lengths. Special remarks are available. Other sizes on request.

Alternative Melting point tubes Electrothermal Alternative Melting point tubes Büchi Alternative Melting point tubes Marienfeld Alternative Melting Point Capillary Tubes KIMAX®

PTFE balls minimize "bumping" during boiling. They are inert and can be used up to 288°C. 100 balls per package.

• For column packing and mixing beds
• Resistant to most chemicals
• Non-contaminating

DIN EN ISO 15528. For liquids. Made of ultra pure and chemically inert PTFE/FEP for contamination-free sampling. Practical push button, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 32 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean.

Alternative Sampler LiquiSampler, PP

Bytac^® Bench protectors, FEP Film with Vinyl or Aluminum Backing. Inert to most chemicals - Non-stick; easy to clean - Use to resurface bench tops and line fume hoods. Contrasting work surface for viewing color changes during titrations. Protects surfaces against absorption of radioactive chemicals. Vinyl backing is recommended for all applications up to 93°C. Aluminium foil-backing is resistant to high temperatures up to 182°C for up to one hour.

Capillary Pistons are designed, developed, and manufactured to fit Gilson MICROMAN® perfectly. They ensure optimal performance of your MICROMAN® pipette across the full volume range.

GLP friendly, these colored clips identify or personalize your PIPETMAN^® by snapping on to the connecting nut to help avoid mix-ups. Made of polyacetal, they can be marked with permanent ink to indicate your name or application. COLORIS™ comes in 5 bright colors: red, green, yellow, blue and white.

Resistant to most chemicals, the articles are ideal for ultra-pure applications and use with aggressive media. Handle design allows dipper to hook over edge of vessel, eliminating dripping of corrosive fluids onto surrounding surface. Use with containers that have at least an 80 mm opening. The sieve mesh size is available in 1.0 mm.

• Non-contaminating and resistant to most chemicals
• Superior chemical resistance
• Lowest concentration of metal ions of any fluoropolymer
• Ideal for coarse sorting or draining of aggressive media
• Handle hooks over edge of vessel for draining

These spatulas are designed for use in the most severe laboratory conditions. They are made of nickel-plated stainless steel and fluoropolymer coating. The coating eliminates surface buildup or loss of valuable sample due to sticking. Will not scratch or damage delicate surfaces.

• Extra heavy-duty PTFE coatings
• Resistant to low and high temperatures
• Use for handling chemically active materials

Compact, energy saving fume hood without ducting system.

• Independently tested and complies with AFNOR NFX 15-211 standard
• Average Inflow Air Velocity: 0.5m/s
• Easy Filter change
• Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock
• Fluorescent lighting provides superior illumination of the work zone
• Sloped acrylic front window
• With transparent back wall (for type SPD-4B1)
• Acrylic side walls
• ISOCIDE™ antimicrobial coating on all painted surfaces minimises contamination.
• Stainless steel spill-retaining work top.
• Sampling port
• Pass-through ports in the back wall
• Pre-filter made of polyester fibre, EU3 rating is included

Hood is delivered unassembled. On-site assembly can be completed in 60 mins. Without special tools.

Options on request:
Support stands, installation

For operation the main filters have to be ordered separately.

Ideally suited for the cultivation of Drosophila melanogaster. Can be supplied with a separately orderable ceaprene stopper. This stopper is gas-permeable and made of water-repellent material.

Properties:

• Autoclavable EasyLoad® racks
• Sterile and non-sterile option
• Racks are stackable
• Colour-coded boxes
• Positioning guides make it easier to place the EasyLoad® refill units on the racks
• EasyLoad® 10 (micro 10 μl, graduated)

Manipulation of liquid chemicals and powders where and when needed.
Advantages: eliminates installation costs, saves substantially capital and running costs, mobile and easy to relocate wherever needed; protects the user and environment against toxic fumes. Low Energy consumption: less than 200 KWh /year (for 2100 hours usage)

Choice of activated charcoal filters (Please order separately!):

• "ORG" filter for flammables and organics
• "CORG" filter suitable for the most common laboratory chemicals, for organic and corrosive vapors
• "FOR" filter for formaldehyde vapors
• "AMM" filter for ammonia vapors
• HEPA filter "HEP": for Particle
• Frame for HEPA filter "SH"

Standard equipment:

• Built in 15/10 steel, covered with white Epoxy (RAL 9010) with blue stripes
• HPL or tempered glass worktop on removable retention tank (optional)
• Transparent PMMA glazed walls on all four sides for comfortable working or lectures
• Ergonomic hand traps or trapeze opening
• 4 protective caps for easy use of external supplies (e.g. power cables, water, gas)
• Air velometer; sampling outlet for reactive tube measurement

Recirculating air filter system (CLASS 2) and coal filters Norm NFX 15-211

• Noiseless fan: 57 dB(A), 220-240 V, 50 Hz, 10 W, 0.1 A
• Air flow: 170 m³/h; face velocity: 0.4 to 0.6 m/s
• Ventilation system with lighting control in case of system failure

Please choose fume hoods, charcoal filters, trolleys and accessories according to your needs. Delivered mounted.
The fume hood will be delivered without bottom retention tank and work top.

Light measuring instrument for precise light measurement up to 200,000 Lux

• Measures illumination in the workplace
• Helps to determine whether a workstation has insufficient light or whether there is too much light
• Photo sensor: silicon diode
• Cosine correction for angular incident light
• Sturdy protective cover for the photo sensor
• Increased service life: Impact protection through a protective casing
• Track function for continuous recording of variable environmental conditions
• Peak Hold Mode to capture peaks
• Selectable measuring units: fc (foot-candle), lx
• AUTO-OFF function
• Delivery in a robust box

Specifications
Measuring range / Readability:	200 lx / 0.1 lx 2000 lx / 1 lx 20000 lx / 10 lx 200000 lx / 100 lx
Measuring frequency:	2 Hz
Cable length (Photo sensor):	approx. 1 m
Dimensions (W x D x H):	100 x 60 x 28 mm
Net weight:	approx. 250 g
Power supply:	9 V Block (not included)

PIPETMAN® L is a mechanical air-cushion pipette with a patented volume locking system that eliminates the need to adjust the volume during pipetting. Due to the innovative ejection system with a lever arm the ejection forces are very low. In addition, the eject button is adjustable, so that it can be comfortably operated by both right- and left-handed users. PIPETMAN® L has a 2D identification code.

• Volume Locking Mechanism
• Particularly light
• Adjustable for left- and right-handed users
• Traceable 2D identification code
• Color coded snaps that match the packaging of the Gilson tips
• Universal shaft that provides a secure hold for most pipette tip brands

Alternative Eight-channel pipettes

Lids offer protection against contamination and evaporation during sample storage and cell cultivation. Four different polystyrene lids are available. High profile without condensation rings is mainly used for non TC-treated 96 well microplates. High profile with condensation rings is recommended for cell culture applications, since it ensures an optimum oxygen supply to cultivated cells due to improved gas exchange. Low profile lids contents are protected against evaporation and contamination, and the covered microplates can be easily gripped on the side in automated processes. Universal ultra low profile lids is compatible with a whole range of different microplates, provides the greatest possible protection against evaporation, and is also suitable for use in automated systems.

Properties:

• Endotoxin-free
• Free of detectable DNase, RNase, human DNA
• All sterile lids are non-cytotoxic

• Packing for distillation columns
• Chemically inert
• High surface area per unit of volume
• Minimum resistance to gas and liquid flow

Ultra-pure sampler with powerful suction for viscousmedia. Specially developed for viscous substances, such as slurries, silt, wet clay and soil samples, sediments, oils, emulsions and creams. The suction flask sucks up and discharges the material. All surfaces are non-porous and crevice-free, preventing dirt accumulation. Only round-profile threads, suitable for food hygiene applications, are used. Allow easy dismantling and cleaning.

Alternative Sampler ViscoSampler, PP