Pumpar

For Filtration, SPE, Degassing, Fluid aspiration.

• N 938.50 KT.18 ensures exceptionally fast evacuation by the parallel and in series connection of both pump heads
• PTFE-coated diaphragm is ideal for aggressive/corrosive gases and vapors
• Pump head made from PPS (Polyphenylsulfide), valves made from FFPM (Perfluoro rubber)

Specifications
Connectors for tube: N 816.3 KT.18 / N 816.1.2 KT.18: N 938.50 KT.18:	ID6 mm ID10 mm
Permissible media and ambient temperature:	5 to 40 °C
Flow rate:	Up to 1.8 m³/h
Ultimate vacuum:	Up to 15 mbar abs.
IP code:	IP 20

Accessories Accessories for Vacuum Pumps LABOPORT® / N 920 G Accessories Accessories for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Accessories Silencer for Vacuum Pumps LABOPORT® / N 920 G Accessories Hose connector for Vacuum Pumps LABOPORT® / N 920 G Accessories Fine control valves for Vacuum Pumps LABOPORT® / N 920 G Accessories Hydrophobic pump protection filter for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Alternative Mini-Diaphragm vacuum pumps LABOPORT® N 96, chemically-resistant

Heavy-walled and flexible.

The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.
One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.
Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.
In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).
An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.

Gas ballast for reliable pump performance.
Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.

Accessories Accessories for ME 1, ME 1C and MZ 1C Accessories Pumps, vacuum / pressure, diaphragm, Vacuubrand, accessories Accessories Vacuum fittings, rubber tubing

Vacuum regulator valve for ME 1, ME 1C and MZ 1C with manual vacuum control using air bleed. The manometer can be mounted and pivoted in several orientations for optimal visibility. High chemical compatibility (especially with the vacuum regulator valve for ME 1C)

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.

Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).

• Improved performance, increased pumping speed and lower ultimate vacuum extends applications in both the laboratory and in industrial applications
• Long-life diaphragm with PTFE sandwich construction and unstressed diaphragm support
• Easy service/exchange of diaphragm or valves due to novel integrated valve head assembly. Easy dismantling, cleaning and reassembly without requiring readjustment
• Very quiet and ultra low vibration due to compact drive with patented motor control system. Ideal as a built-in component for sensitive equipment in both the laboratory and in industry
• Superior vapour tolerance due to integral tubing connections and gas ballast valve for continuous purge (for ME 16C NT, MZ 2C NT, MD 4C / 12C NT and MV 10C NT)
• Easy to clean due to smooth exterior surfaces

The VARIO^® design provides vacuum control by precise and continuous adaption of the chemistry diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.

Diaphragm pump MD 4CRL NT with reduced leakage rate (0.001 mbar x l/s).

Country-specific power cord versions available on request.

Specifications
Vacuum inlet:	10mm tubing nozzle
Pressure outlet:	10mm tubing nozzle

Accessories Sealing kit NT for chemistry diaphragm pumps NT Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C

Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.

• 100% oil-free pumping of gases
• gas ballast as standard for working with condensable vapours
• good vacuum even with gas ballast
• high vapour tolerance for water and solvents
• long service life, low maintenance

Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports

Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN^®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.

With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.

Alternative Chemistry Pumping Units VARIO® select Alternative Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic® Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C