Sprutpumpar

Cost efficient pH tester, ideal for testing small amounts of liquid and in narrow vessels. The supplied storage container prevents the electrode from drying out.

• ATC from 0 °C to 50 °C
• Large, easy-to-read LCD display
• 3-point calibration

Scope of supply: pH meter

Please order batteries separately.

Specifications
pH Measuring range:	0 ... 14
pH Accuracy: pH resolution:	±0.1 ±0.1
Dimensions with electrode (W x D x H):	36 x 20 x 210 mm
Dimensions electrode (diam. x L):	12 x 110 mm
Weight:	72 g
Power supply:	2 x 3 V CR2032 button cell
IP code:	IP 65
Warranty:	2 years

With cable duct. For three electrodes, 3 openings with diam. 16 mm. Additional opening for temperature sensor. Three joints for high flexibility and adjustment options.

Base plate:	105 x 125 mm
Base plate weight:	0.7 kg
Arm weight:	0.1 kg
Max. arm height:	320 mm

Low maintenance combination electrode with integrated temperature sensor, robust plastic shaft and gel electrolyte.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14
Temperature sensor:	NTC 30 kΩ
Electrolyte:	Gel
Length/Ø:	120/12 mm
Cable length:	1 m

Basic pH combination electrodes, with plastic body, gel reference system. SenTix^® 20 with plug head (AS/DIN or AS/BNC cable combination please order separately). Sentix 21-3 and Sentix 41-3 with 3 m fixed cable.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	Gel
Diaphragm:	Fibre
Membrane shape:	Cylindical
Membrane resistance at 25°C:	1 GΩ

Low-maintenance pH combination electrode for use in water management and process chemistry. Not refillable.

• With glass shaft and Silamid^® reference
• Gel electrolyte with visible KCl reserve
• With factory test certificate 2.1 for pressure and temperature resistance

Scope of supply: Electrode with screw plug head (Pg 13.5 installation thread), HD seal, connection cable

Specifications
Temperature range: Pressure range:	-5 ... 80 °C 1 ... 12 bar
pH range:	2 ... 12
Length / diam.:	120 mm / 12 mm
Electrolyte:	Gel
Diaphragm:	Ceramic
Membrane shape: Membrane resistance at 25 °C:	Sphere 30 MΩ

Low maintanance pH electrodes with plastic shaft and gel electrolyte, with built-in temperature sensor NTC 30 kOhm. With waterproof digital connector, cable length 1.5 m, SenTix^® 940-3 with 3 m cable.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	Gel
Diaphragm:	Fibre
Membrane shape:	Cylinder
Membrane resistance at 25°C:	< 1GΩ

pH electrode with chemically resistant PEEK shaft and open junction for general applications in the laboratory and outdoors.

• ARGENTHAL™ reference system with silver ion trap
• Solid XEROLYT^® reference electrolyte

-With integrated temperature probe and fixed cable


ISM version: With automatic sensor recognition and storage of calibration history. Calibration data and probe ID are stored in the sensor and transmitted automatically to the measuring device

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Electrolyte:	XEROLYT® polymer
Diaphragm:	open junction
Membrane resistance at 25 °C:	< 250 MΩ

Standard pH combination electrodes with glass shaft, non-solid electrolytes. With fixed cable (1m). SenTix^® 60 with screw head (AS/DIN or AS/BNC cable combination please order separately).

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Length / diam.:	120 / 12mm
Electrolyte:	Liquid, KCl 3mol/l
Diaphragm:	Platinum
Membrane shape:	Conical
Membrane resistance at 25°C:	600 MΩ
Refill hole cover:	Slide

For BlueLine pH electrodes, ScienceLine, IoLine and TopLine.
Cable length: 1 m coaxial cable.

Combined pH electrode, glass shaft, ARGENTHAL™ reference with silver-ion trap, detachable cable. For InLab^®Routine please order separately InLab^® cable S7 and for InLab^®Routine Pro and InLab^®Routine Pro ISM please order separately InLab^® cable MultiPin-BNC/RCA.

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Electrode Dia.:	12 mm
Electrolyte:	Liquid, KCl 3 mol/l
Diaphragm:	ceramic
Membrane resistance at 25 °C:	< 600 MΩ
Shaft length:	min. 120 mm

With spear-tip membrane. With glass shaft, Argenthal™ reference system and S7 plug head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 11 pH
Temperature sensor:	no
Length / Diam.:	25 mm / 6 mm
Electrolyte:	XEROLYT® PLUS polymer electrolyte, non-refillable
Diaphragm:	open junction
Membrane resistance at 25 °C:	< 250 MΩ

For connecting pH electrodes with built-in temperature sensors and MultiPin™ plug head or S7 plug head (without temperature sensor). Suitable for a wide range of measuring devices from different manufacturers.

With glass shaft, Ag/AgCl reference system, connections for AS/DIN, AS/DIN-3, AS/BNC, S7 plug head.

Specifications
Temperature range:	0 ... 100 °C
Length / Diam.:	120 mm / 12 mm
Electrolyte:	KCl 3 mol/l
Sensor:	Platinum
Sensor shape:	Disc (4 mm)
Diaphragm:	Ceramic

pH electrode with chemically resistant PEEK shaft and open junction for general applications in the laboratory and outdoors.

• ARGENTHAL™ reference system with silver ion trap
• Solid XEROLYT^® reference electrolyte

-With fixed cable

• Waterproof (IP 67)

ISM version: With automatic sensor recognition and storage of calibration history. Calibration data and probe ID are stored in the sensor and transmitted automatically to the measuring device

Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Membrane resistance at 25 °C:	<250 MΩ
Electrolyte:	XEROLYT® polymer
Diaphragm:	Open junction

For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.

Specifications
Measurement range:	0.02 ppm…saturated
Temperature range:	0…80 °C
Length/Ø:	110 mm/13 mm
Cable length:	1 m

• Maintenance-free, robust, combination easy-to-use pH electrode
• Universally applicable, well suited for measurements in emulsions and suspensions
• Thanks to the SINGLE PORE clogging of the diaphragm is practically impossible
• Serial number, certificate

Specifications
Temperature range:	-10 ... 80 °C
pH range:	0 ... 14
Electrolyte:	Polisolve (maintenance-free)
Shaft material:	Glass
Diaphragm:	Single Pore
Reference system:	Everef-B
Temperature sensor:	No
Electrical connection:	S7 connector head

pH-combination electrode with glass shaft, ARGENTAL™ reference system with Ag⁺trap and MultiPin™ electrode head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Temperature sensor:	NTC 30 kΩ
Length / Diam.:	130 mm / 5 mm
Electrolyte:	Fluid, KCl 3mol/l
Diaphragm:	Ceramic
Membrane resistance at 25 °C:	< 300 MΩ

For ion-weak samples like ultra-pure water, deionized water.
pH-combination electrode with glass shaft, ARGENTAL™ reference system with Ag⁺trap and MultiPin™ electrode head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 11 pH
Temperature sensor:	NTC 30 kΩ
Length / Diam.:	170 mm / 12 mm
Electrolyte:	Fluid, KCl 3 mol/l
Diaphragm:	Glass sleeve
Membrane resistance at 25 °C:	< 50 MΩ

With epoxy body and gel electrolyte, fixed cable with BNC / Cinch connection. For simple measurements, particularly suitable for portable pH meters, with temperature sensor.

Specifications
Electrolyte:	3 mol / L KCI sat. with AgCl as gel, non-refillable
Body length:	120 mm
pH:	0 ... 14 pH
Temperature:	0 ... 80 °C
Temperature sensor:	NTC 30 kΩ

Basic pH combination electrodes, with plastic body, gel reference system. 1 m fixed cable.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	Gel
Diaphragm:	Fibre
Membrane shape:	Cylindical
Membrane resistance at 25°C:	1 GΩ

pH-combination electrode with glass shaft, ARGENTAL™ reference system with Ag⁺trap and S7 electrode head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Temperature sensor:	no
Length / Diam.:	60 mm / 3 mm
Electrolyte:	Fluid, KCl 3 mol/l
Diaphragm:	Ceramic type Z (pore size 0.9 µm)
Membrane resistance at 25 °C:	< 1000 MΩ

• Robust, combination pH electrode for measurements in media containing proteins
• 3 ceramic diaphragms guarantee quick and accurate measurements
• Easy to clean
• Long-term-stable, thanks to EVEREF system
• Serial number, certificate

Specifications
Temperature range:	-10 ... 100 °C
pH range:	0 ... 14
Electrolyte:	Protelyte (refillable)
Shaft material:	Glass
Diaphragm:	3 x ceramic
Reference system:	Everef
Temperature sensor:	No
Electrical connection:	S7 connector head

With flexible electrode holder for two electrodes and temperature sensor.

Precision pH combination electrodes with glass shaft and liquid electrolyte. With plug head (AS/DIN or AS/BNC cable combination please order separately). SenTix^® H for high alkaline solutions, SenTix^® HW for low conductive samples.

Specifications	SenTix® H // SenTix® HW
Temperature range:	0 ... 80 °C // 0 ... 60 °C
pH range:	0 ... 14 pH
Length / diam.:	170 / 12 mm
Electrolyte:	Liquid, KCl 3 mol/l
Diaphragm:	Ground joint
Membrane shape:	Cylindical
Membrane resistance at 25°C:	2 GΩ // 800 MΩ
Refill hole cover:	Slide

Standard pH combination electrodes with plastic shaft, non-solid electrolytes. With fixed cable (1m).

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 / 12mm
Electrolyte:	Liquid, KCl 3mol/l
Diaphragm:	Ceramic
Membrane shape:	Cylindrical
Membrane resistance at 25°C:	1 GΩ
Refill hole cover:	Plug

pH-combination electrode with glass shaft, ARGENTAL™ reference system and S7 electrode head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 12 pH
Temperature sensor:	no
Length / Diam.:	100 mm / 6 mm
Electrolyte:	XEROLYT®EXTRA Polymer
Diaphragm:	open junction
Membrane resistance at 25 °C:	< 600 MΩ

• Robust, combination pH electrode for daily laboratory use
• Universally applicable, in strong acids as well as in strong bases
• Ideally suited for acid/base titrations
• Serial number, certificate

Specifications
Temperature range:	-10 ... 100 °C
pH range:	0 ... 14
Electrolyte:	3M KCl (refillable)
Shaft material:	Glass
Diaphragm:	Ceramic
Reference system:	Everef
Temperature sensor:	No
Electrical connection:	S7 connector head

Free standing electrode vessel for storing electrodes with 12mm diam. shaft.

Basic pH combination electrodes, with plastic body, gel reference system. 1 m fixed cable.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	Gel
Diaphragm:	Fibre
Membrane shape:	Cylindical
Membrane resistance at 25°C:	1 GΩ

Standard pH combination electrodes with glass shaft, non-solid electrolytes. With fixed cable (1m).

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Length / diam.:	120 / 12mm
Electrolyte:	Liquid, KCl 3mol/l
Diaphragm:	Platinum
Membrane shape:	Conical
Membrane resistance at 25°C:	600 MΩ
Refill hole cover:	Slide

For portable applications in the lab and outdoors, robust and maintenance-free.
pH-combination electrode with chemically resistant PEEK shaft, ARGENTHAL™ reference system. Fixed BNC/RCA (Cinch) cable. InLab^® 413 IP67 with MultiPin™ electrode head.

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Electrolyte:	XEROLYT® polymer
Diaphragm:	double open junction
Membrane resistance at 25 °C:	< 250 MΩ

pH electrode with chemically resistant PEEK shaft and open junction for general applications in the laboratory and outdoors.

• ARGENTHAL™ reference system with silver ion trap
• Solid XEROLYT^® reference electrolyte

Please order compatible cable separately.

Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Membrane resistance at 25 °C:	<250 MΩ
Electrolyte:	XEROLYT® polymer
Diaphragm:	Open junction

pH micro combination electrode glass shaft and liquid electrolyte. With plug head (AS/DIN or AS/BNC cable combination please order separately).

Specifications
Temperature range:	0 to 100°C
pH range:	0 to 14pH
Length // diam.:	40/80mm // 12/5mm
Electrolyte:	Liquid, KCl 3mol/l
Diaphragm:	Ceramic
Membrane shape:	Cylindical
Membrane resistance at 25°C:	< 700MΩ

Redox combination electrodes for measuring the oxidation/reduction potential in aqueous solutions. The signal is generated on the surface of the indicator electrode by an electron exchange with the oxidation/reduction system of the measured medium. Without temperature sensor. With Safelock™ end ring for easy refilling of the reference electrolyte and complete sealing in closed position. For use with a wide variety of measuring instruments.

InLab^® Redox: For general purpose. With platinum ring indicator electrode
InLab^® Redox Pro: For emulsions, wastewater analysis and general purpose. With movable ground joint junction and platinum ring indicator electrode
InLab^® Redox L: For large samples. With platinum ring indicator electrode
InLab^® Redox Au: Combined redox electrode with gold ring indicator electrode
InLab^® Redox Ag: Combined redox electrode with silver ring indicator electrode
InLab^® Redox Micro: For small samples. With platinum ring indicator electrode

Please order connection cable separately.

Specifications
Temperature range:	0 ... 100 °C
Connection:	S7
Reference system: Reference electrolyte:	Ag/AgCl 3 mol/l KCl (InLab® Ag: 1 mol/l KNO3)
Type of junction:	Ceramic
Shaft material:	Glass

Universel ORP electrodes with platinum disc for laboratory applications.

Specifications
Measuring range:	-1250.0 ... 1250.0 mV
Working temperature range:	0 ... 100 °C
Length / diam.:	120 mm / 12 mm
Electrolyte:	KCl 3 mol/l
Sensor:	Platinum
Diaphragm:	Ceramic

Standard pH combination electrodes with glass shaft, non-solid electrolytes. With fixed cable (1m).

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Length / diam.:	120 / 12mm
Electrolyte:	Liquid, KCl 3mol/l
Diaphragm:	Platinum
Membrane shape:	Conical
Membrane resistance at 25°C:	600 MΩ
Refill hole cover:	Slide

pH electrode with chemically resistant PEEK shaft and open junction for general applications in the laboratory and outdoors.

• ARGENTHAL™ reference system with silver ion trap
• Solid XEROLYT^® reference electrolyte

-With integrated temperature probe and fixed cable

Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Membrane resistance at 25 °C:	<250 MΩ
Electrolyte:	XEROLYT® polymer
Diaphragm:	Open junction

pH-combination electrode with glass shaft, ARGENTAL™ reference system with Ag⁺ trap and S7 electrode head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 12 pH
Temperature sensor:	no
Length / Diam.:	120 mm / 12 mm
Electrolyte:	Fluid, KCl 3 mol/l
Diaphragm:	movable glass sleeve
Membrane resistance at 25 °C:	< 600 MΩ

pH-combination electrode with polysulfone shaft, Ag/AgCl reference system and S7 electrode head.

Cable - please order separately.

Specifications
Temperature range:	0 ... 50 °C
pH range:	1 ... 11 pH
Temperature sensor:	no
Length / Diam.:	120 mm / 12 mm
Electrolyte:	Fluid, KCl 3mol/l, AgCl saturated
Diaphragm:	Safelock™ ABS ring
Membrane resistance at 25 °C:	< 800MΩ

Precision pH electrodes with glass shaft and liquid electrolyte KCl 3 mol/l Ag+ free, with built-in temperature sensor NTC 30 kOhm, cable length 1.5 m.

Specifications
Temperature range:	0 ... 100 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	KCl 3 mol/l Ag+ free
Diaphragm:	Platinum wire
Membrane shape:	Cone
Membrane resistance at 25°C:	< 600 MΩ

With plug head, glass shaft, platinum diaphragm (N 64 with sleeve diaphragm), 3mol/l KCl electrolyte, Silamid^® reference system and 12mm dia. spherical membrane.

Connection cable for pH electrodes with plug head connection to plugs as indicated.

Combined ISE and GSE electrodes.