Ljusmikroskop

The LABSOLUTE® micro tubes are made of high-quality PP and are resistant to mechanical and chemical stress. Simple and safe opening and closing of the vessel allow safe handling for greater comfort.

• Free of DNase, RNase and pyrogens
• Non-sterile
• Guaranteed metal-free
• Precise graduations lines on 1.5 and 2.0 ml reaction vessels
• Puncturable cap
• Matted cap with labelling field
• Can be centrifuged up to 25000 x g (1.5 and 2.0 ml) and 20000 x g (0.5 ml)
• Autoclavable at 121 °C

Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Accessories Rack for micro tubes, 20 wells, PP Alternative Safe seal micro tubes, PP Alternative Micro tube with flip cap, PP

The safe seal micro tubes from LABSOLUTE® have a special locking mechanism preventing unintentional opening of the lid during applications with thermal stress.

• Frosted cover and labelling field
• Graduation for easy volume determination
• Non-sterile
• Can be centrifuged up to 18000 x g (0.5 ml and 2.0 ml) and 30000 x g (1.5 ml)
• Autoclavable

Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Accessories Rack for micro tubes, 20 wells, PP Alternative Micro tubes, PP

The LABSOLUTE® 5 ml micro tubes with attached snap-on cap are ideal for working with volumes up to 5 ml. For incubations above 80 °C, it is recommended to close the tube with the clip (7.696 749).

• Low binding variant for maximum sample recovery
• Amber vessels are ideal for lightsensitive materials
• Free from DNase, RNase and pyrogens
• Centrifugation up to 20000 x g
• Cold-resistant up to -86 ° C
• Autoclavable

Accessories Tube rack for 5 ml micro tubes and 15 ml centrifuge tubes, white, PS Accessories Cryo boxes for 5 ml micro tubes, PC Accessories Mini coolers -20 °C, PC

The 1.5 ml LABSOLUTE® micro tubes have a special flip cap that allows one-handed opening without touching the inside of the cap with your hand. This significantly reduces the contamination risk of the sample.

• Non sterile
• DNase, RNase and pyrogen-free
• Autoclavable at 121°C

Accessories Rack for micro tubes, 20 wells, PP Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Alternative Micro tubes, PP Alternative Safe seal micro tubes, PP

LLG-Microcentrifuge tubes are ideal for all test throughputs. These centrifuge tubes are very resistant to mechanical strain and highly resistant to temperature fluctuations and chemicals. The tubes have graduation marks for quick and easy volume checks. The ergonomic cap design with click-lock mechanism ensures a secure seal and makes opening and closing easier. With frosted labelling area on the housing.

Certified DNase-, RNase-, and pyrogen-free. Guaranteed metal-free. Suitable for microbiology.

Specifications
Autoclavability
Temperature:	121 °C
Pressure:	1.05 bar or 15 psi
Time:	20 min or less
Centrifugation
Fixed angle rotor:	25000 x g
Swing out rotor:	70000 x g

Alternative  Alternative  Alternative LLG-Centrifuge tubes, 5 ml, PP, with Safe-Lock lid

Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.

• Autoclavable at 121 °C (2 bar), according to DIN EN 285
• Suitable for storage up to -80 °C
• BIO-CERT^® CERTIFIED QUALITY

Accessories Strips of 8 lids for micro test tubes, PE Accessories Tube rack with grid, empty, PP

Thanks to the stable connection between the mounting plate and the racks, the stackable SBS racks are especially well-suited for use with robots and other automated dispensing systems. Coded tubes (A1 - H12) and rack sides suitable for barcode labels simplify sample organization.

• Tubes and rack are autoclavable at 121 °C (2 bar), acc. DIN EN 285
• Tubes, racks, and lids can withstand temperatures as low as -80 °C
• The seal of the tubes is pressure-tested

For caps without tamper-proof closure.

Accessories Micro tubes, PP, with attached screw cap, PE, with silicone seal

The Matrix™ SepraSeal sealing mats are suitable for securely sealing sample tubes with or without 2D code. For sample access, the caps can be removed with the practical cap removal tool (Cat.-No. 6.254 390, please order seperately) or pierced once. The pre-slit versions are suitable for multiple piercing. The self-sealing function of the pre-slitted elastomer maintains sample integrity.

• For storage down to -20 °C
• Individual closure or closure of 96 sample tubes simultaneously possible
• Good chemical resistance
• Low evaporation rate

With the Matrix™ DuraSeal sealing mat (Cat.-No. 4.658 312), sample tubes are permanently sealed. The sealing mat is pre-slit for sample access and has a v-shaped design. The special elastomer ensures that the integrity of the sample is maintained. Suitable for sample storage down to -80 °C.

• Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)
• No surface coating, e.g. silicone
• Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
• Novel PP, manufactured under optimized conditions
• Highly transparent

Alternative DNA LoBind Tubes, with screw cap

• Simple, practical and ergonomic single-hand operation
• Large labelling area
• Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur^® purity levels
• Maximum safety and stability for centrifugation up to 25000 x g
• Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used

-Simple, practical and ergonomic single-hand operation

• Large labelling area
• Hinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86°C to 80°C
• Maximum safety and stability for centrifugation up to 25000 x g
• Free of human DNA, free of DNase and RNase, free of PCR inhibiting agents
• For PCR preparations or any reactions where DNase or RNase could interfere with the reaction or analysis
• From 80 °C on, please use tube clips (cat. no. 9.409 294)

Scope of supply:
400 Eppendorf Tubes^® 5.0 mL, PCR clean (Certified purity grade), 8 universal adapters for rotors with bores for 15 ml conical tubes, 2 tube racks 5.0 mL (12 spaces, white)

Accessories Tube Clips for Eppendorf Tubes® 5.0 mL Alternative Eppendorf Tubes® 5.0 mL, PP, with hinged lid Alternative Eppendorf Tubes® 5.0 mL, PP, with hinged lid, amber Alternative Eppendorf Tubes® 5.0 mL, PP, with screw cap, Forensic DNA Grade Alternative Eppendorf Tubes® 5.0 mL, PP, with screw cap, amber

• Ergonomic operation: Simple, practical and ergonomic operation. Large labelling area.
• Lid design: Screw cap for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 100 °C
• Material: Exceptionally high-quality, transparent polypropylene, free of plasticizers, biocides or mold release agents, for reliable test results
• Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean and sterile purity levels
• Centrifugation safety: Maximum safety and stability for centrifugation up to 25 000 x g and fast and efficient protocols.
• Conical shape: Compatible with accessories for conical 15 mL tubes - many existing adapters and racks can be used.

• Minimum protein loss (less than 3%, BSA 1µg/ml)
• No surface coating, e.g. silicone
• Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
• Novel PP manufactured under optimized conditions
• Highly transparent

Alternative Protein LoBind Tubes, with screw cap

• Simple, practical and ergonomic single-hand operation
• Large labelling area
• Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur^® purity levels
• Maximum safety and stability for centrifugation up to 25000 x g
• Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used

-Hinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °C

• From 80 °C on, please use tube clips (cat. no. 9.409 294)

Accessories Tube Clips for Eppendorf Tubes® 5.0 mL Alternative Eppendorf Tubes® 5.0 mL, PP, with hinged lid, amber Alternative Eppendorf Tubes® 5.0 mL, PP, with screw cap, Forensic DNA Grade Alternative Eppendorf Tubes® 5.0 mL, PP, with screw cap, amber Alternative Eppendorf Tubes® 5.0 mL, starter pack, with snap caps

• Simple, practical and ergonomic single-hand operation
• Large labelling area
• Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur^® purity levels
• Maximum safety and stability for centrifugation up to 25000 x g
• Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used

-Hinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °C

• For light-sensitive samples
• From 80 °C on, please use tube clips (cat. no. 9.409 294)

Accessories Tube Clips for Eppendorf Tubes® 5.0 mL Alternative Eppendorf Tubes® 5.0 mL, PP, with screw cap, Forensic DNA Grade Alternative Eppendorf Tubes® 5.0 mL, PP, with screw cap, amber Alternative Eppendorf Tubes® 5.0 mL, PP, with hinged lid Alternative Eppendorf Tubes® 5.0 mL, starter pack, with snap caps

Secures the lid for boiling.

Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The sealing cone of the cover lies seamlessly against the interior of the tube, preventing the contents from coming into contact with the thread.

• Ungraduated
• Operating range -90 °C to 100 °C
• Attached covers are suitable for colored cover inserts (available separately)
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors

Accessories Cap inserts, PP, for reaction tubes

Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The silicone ring in the cover provides an optimal seal for the reaction tube without coming into contact with the contents of the reaction tube itself. Tubes are suitable for storing liquid nitrogen in the gas phase.

• With matte label field
• Operating range -196 °C to 121 °C
• Suitable for autoclaving under DIN EN 285, at 121 °C (2 bar)
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors

Accessories Cap inserts, PP, for reaction tubes

• Operating range: -196 °C to 121 °C
• Autoclavable at 121 °C (2 bar), acc. DIN EN 285
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors

Accessories Screw caps, PP, for micro tubes Accessories Cap inserts, PP, for reaction tubes Alternative Microtubes, PP, with screw-cap, PP Alternative Micro tubes, PP, without screw cap, ungraduated

• With silicone seal
• Matt label field
• Operating range: -196 °C to 121 °C
• Autoclavable at 121°C (2 bar), acc. to DIN EN 285
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors

Accessories Cap inserts, PP, for reaction tubes Alternative Micro tubes, PP, without screw cap Alternative Microtubes, PP, with screw-cap, PP, with lid closure

• With silicone seal
• Matt label field
• Operating range: -196 °C to 121 °C
• Autoclavable at 121°C (2 bar), acc. to DIN EN 285
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors

Accessories Cap inserts, PP, for reaction tubes Alternative Micro tubes, PP, without screw cap

• Suitable for tamper-evident cover
• Operating range: -196 °C to 121 °C
• Autoclavable at 121 °C (2 bar), acc. DIN EN 285
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors

Accessories Tamper-evident caps, PP, for micro tubes Alternative Microtubes, PP, with screw-cap, PP

The microcentrifuge tubes are available with an additional lid locking to achieve especially effective sealing and prevent accidental opening.

• Graduated
• With attached lid
• Autoclavable at 121 °C (2 bar), acc. to DIN EN 285
• BIO-CERT^® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors

Alternative Reaction tubes with attached lid, PP, BIO-CERT® PCR QUALITY

These culture containers are not only suitable for the proliferation of plant tissue cultures but can also be used as transport containers and are available with or without lids.

Proporties:

• Maximum light transmission
• Rapid and successful growth
• High clarity
• Particularly suitable for the culture of Drosophila melanogaster

• Minimum protein loss (less than 3%, BSA 1µg/ml)
• No surface coating, e.g. silicone
• Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
• Novel PP manufactured under optimized conditions
• Highly transparent