Desiccator-plast

Cost effective alternative to glass desiccators. Highly transparent, lightweight, shatterproof, made of polycarbonate.
Silicon O-ring and specially designed 'locking clip' allows use without grease and ensures an airtight seal. Flange lock holds the bottom and the lid together during non-vacuum conditions. Three-way stopcock provides great convenience for consistent vacuum draw, vacuum release or gas exchange e.g. inert gas. Maximum vacuum of 1.3mbar (1.3 x 10^-4 MPa) for more than 72 hours. Wide base provides superior stability. Hose connection outer diam. 9.5 mm.
Also available in brown with UV-blocking effect for light sensitive samples.
G Models will be delivered with a vacuum gauge.

Included in delivery: Drying agent tray, perforated sample tray, O-ring and flange locker.

With non-return valve.

Light-green, ceramic-metal composite. With numbered quadrants. Autoclavable.

Transparent, lightweight, unbreakable, for vacuum or non-vacuum use. With stopcock. Large, stable base. No danger of implosion. Capable of maintaining 0.95 bar negative pressure over a 24 hour period. With silicone O-ring, no lubrication required. Suitable for 230 mm diameter desiccator discs or plates. Max. height over plate 195 mm. Suitable for vacuum hoses with an inner diameter of 6 to 10 mm.

Plate not included.

PP. For use at room temperature. Not suitable for use with hot crucibles.

SICCO Desiccators are designed for storing or drying humidity sensitive products using silica gel. The tight fitting door protects the contents from contamination from the atmosphere. The controlled environment inside the desiccators are ideal for storing reference materials, retained samples, metallographic specimen, tobacco and DNA-samples.
Desiccators Mini Premium including 2 shelves, hygrometer, bottom with non-slip rubber feet.

• One Touch Door with circular seal
• Robust construction
• Shatterproof cabinet made of polycarbonate
• Hinge door with wide opening angle
• Lightweight, transportable
• Stackable
• Desiccant in a handy, resealable container included in delivery

Transparent PC bell and blue PP lower part. Will not break or implode under vacuum provided that the operating instructions are obeyed. Lower part is resistant to diluted acids, alkalis and other common desiccants. Vacuum connection at lower part. TFE stopcock is suitable for vacuum tubing 6.4mm i.d. For air tight sealing it is sufficient to grease sealing surface a little. No additional sealing ring is necessary. The additional rim at the bell prevents grease stains on lab benches.

Crystal clear, PC dome lid. PP. Lower section and desiccant tray. Venting stopper with non-return valve in lid. Polychlorbutadiene rubber (CK) O-ring seal between lid and base which is compressed when vacuum is applied. Lightweight and easy to use.

Neoprene rubber.

This lightweight plastic vacuum desiccator holds a full vacuum of 760 mm Hg at room temperature for 24 hours.

• Polycarbonate lid with large ribbed button
• White PP base
• Incl. 0.32 cm thick perforated plate
• Conical polypropylene valve with PTFE cone, for hoses with 6.4 - 9.5 mm I.D.
• With neoprene O-ring, for sealing up to 0 °C without grease

Lower portion can be filled with desiccants. The materials to be dried are placed on a perforated disc made of PP. The lid is sealed with a neoprene gasket. Ideal for use in educational laboratories.

Lower portion can be filled with desiccants. The materials to be dried are placed on a perforated disc made of PP. The lid is sealed with a neoprene gasket. Ideal for use in educational laboratories. Also available with stopcock for evacuation.