Overaller, rockar, jackor, byxor för rena rum

LLG-uniVACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations.

• Integrated vacuum pump with vacuum control
• Easy to use
• Self-closing connectors for quick installation and prevention of liquid or aerosol escape
• Liquid level sensor, prevents liquid overflow
• Autoclavable waste collection bottle and nozzle

Please order compatible 4l replacement bottle with 7.048 064.

Scope of supply: Vacuum Aspiration System with integrated vacuum pump, 4 liter waste collection bottle, single channel needles and 8-channel needle aspirator handles, single channel and 8-channel adaptor for 200 µl pipette tips, single channel adaptor for 1000 µl pipette, tubing and quick-connectors

Specifications
Vacuum range:	300 ... 600 mbar (adjustable)
Aspiration rate:	1 ... 15 ml/s
Noise emission:	<50 dB(A)
Dimensions (W x D x H):	180 x 320 x 530 mm
Weight:	3.4 kg
Power supply:	100 ... 240 V, 50/60 Hz
Warranty:	3 years

Accessories Accessories for Aspirator LLG-uniVACUUSYS

For use in pressure lines or vacuum pump exhausts. High-purity polypropylene housing with nozzle for connection to 12mm i.d. tubing. Contains highly pure activated charcoal granules and a folded HEPA filter at the base of the unit that retains 99.97% of all particles <0.3µm.

Laminated hydrophobic glass microfibre filter. Ideal for the sterilisation of large volumes of air at low pressure. Available in two sizes, depending on the volume of air or gas to be filtered. Non-sterile, separately available. Autoclavable.

• Maximum operating pressure 4.1 bar
• Wide range of chemical compatibility
• High loading capacity and high through-put filtration media
• 99.97% of particles of 0.3µm or larger are retained
• Autoclavable at up to 132 °C for one hour
• Connectors: stepped barb (SB) and female national pipe thread (FNPT)

Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46mm. Connections: For 6mm to 10mm diameter bore tubing. Also accept male luer slip.

• Hydrophobic PTFE membrane and choice of chemical trap:
• Activated carbon with 82000m² filtration area removes organic vapours and radioactive particles
• Molecular sieve - removes water from organic and alkaline air streams
• Desiccant removes water from acidic air streams
• 99.99% of particulates 0.1µm or larger are retained
• Maximum operating pressure 1 bar (wet gas) / 4.2 bar (dry gas)

For vacuum pump protection from corrosive vapours and contaminants. With end connectors for 12mm bore tubing. Supplied singly.

Butterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10^-6 mbar x l/s. Excellent throughput.