Värme-Termostater

Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.

• Digital control with LED display
• Can be used up to 120 °C
• For timer and continuous operation
• Can be used with different heating blocks
• 1 x block unit
• With overheating protection

Heating block with aluminium beads as an alternative to exchangeable blocks with borings.
The aluminium beads ensure high thermal conductivity. Various types of vessels, such as tubes, bottles, and microtitre plates can be individually assembled and simultaneously tempered in the dry bath. Easy to remove from the LLG-uniBLOCKTHERM thanks to two handles. The heating block holds a max. capacity of 700 ml.

Scope of supply: Heating block, aluminium beads (1 kg)

Drain syphon SY1: For the rapid draining of baths.

Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.

PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used.

Stainless steel bridge for the new CORIO™ series.

CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.

• For internal and external applications
• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated cooling coil for counter-cooling

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.

• Single, dual and four block capacity
• Dual display
• USB connectivity enables traceability of data
• Molded block chamber

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.

• Microprocessor Control
• LED Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Audible Alarm

For internal and external applications. The thermoregulators with maximum flexibility can be mounted with the sturdy bath clamp to any bath up to 50 litres.

• Easy switching between internal and external circulation
• Large colour TFT Display
• Easy to operate via central controller
• Integrated programmer for 8 x 60 program steps
• Continuously adjustable, powerful pressure pump
• USB interface
• External Pt100 sensor connection
• Class III (FL) acc. to DIN 12876-1