Slangar, Plast

Highly chemical resistant. Supplied per meter.

Food safe, non talc-coated. According to BfR XV (Silicone) and FDA 177.2600. Durometer 60 ± 5 Shore A to DIN 53505. Supplied per meter.

Black, thermoplastic elastomer, Shore A 61. Suitable for use as tubing for peristaltic pumps. High endurance. Resistant to many aggressive chemicals.

• Temperature range -60 to 135 °C
• Superior weathering
• Abrasion resistant
• Low gas permeability versus rubber tubing
• Ozone (300 pphm) and UV light resistant

Food safe, non talc-coated. According to BfR XV (Silicone), FDA 177.2600 and EC 1935/2004, RAU-SIK 6602. Durometer 60 ± 5 Shore A to DIN 53505. Supplied per meter.

Transparent, heat resistant up to 60°C. Hardness 80 Shore A. Supplied per meter.

Transparent. Shore A 55. Universal laboratory tubing with very good gripping properties on glass or plastic fittings. Very low gas permeability level similar to rubber. Resistant to most laboratory chemicals. Suitable for peristaltic pumps and for food and beverage dispensing. Meets FDA and USP class VI.

• Temperature range -50 to 74°C
• Smooth inner surface
• Contains no BPA or phthalates

Transparent. PVC with terylene mesh reinforcement. Certificated by German TÜV with due regard to regulatory of DIN EN ISO 5774:2008. Proofed by BGVO directive 2002/72/EC bis 2008/39/EC for food contact. Durometer 77 Shore A. Supplied per meter.

Synthetic fluoroelastomer. Chemically resistant to hydrocarbons (aromatic and aliphatic), oils, strong acids, oxidizing agents and chlorous solvents. Excellent resistance to abrasion and flexing. Good ozone and radiation protection. Impermeable to gas and steam. Shore A, Density 1.9. Temperature range -20 °C to 200 °C (up to 300°C for short periods). Elongation at tear >250%. Suitable for transporting corrosive liquids.

Gives a visual indication of liquid or gas flow in tubing. Operates in both directions and at any angle. Can accomodate flow rates down to approx. 150 ml/min. Maximum pressure: 2 bar. Food Safe.