Skeer

For safe fastening of different shaking objects between rubber-coated tension rollers, which are height-adjustable attached to longitudinal struts, resulting in a large number of fastening points.

Long-term tested for safe and reliable operation. Suitable for temperature control in refrigerated circulators.

• Low toxicity
• Low viscosity
• High stability
• Almost odor-free
• Good thermal conductivity
• Low corrosion susceptibility
• Wide temperature ranges

DURAN^®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass-screw connections GL14 with PTFE olives (O.D. 9mm, T-GL2000 with GL18 and O.D. 11mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +120°C at maximum. Special sizes available on request.

DURAN^®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.

Clamps to be placed on the shaking tray.

The heating bath is noted for:

• Cylindrical bath shape
• Heating elements integrated into the bath base
• Heat transfer media can be low-viscous oil (50 mPas) or water
• Two carry handles
• Infinitely variable safety temperature limiter according to DIN 12877
• Double-jacketed mantle protection against burns
• Digital display for target, actual and safety temperatures as well as speed
• Integrated magnetic stirrer drive to circulate the tempering fluid, allowing for better heat distribution in the bath
• RS 232 interface

Stainless steel, for securing a test plate on shaking trays. Supplied with attachment material.

Used as a shaking platform. For the slow moving of e.g. nutrient media solutions in Petri dishes and flasks.

Made of stainless steel with holes to accommodate clamps for Erlenmeyer flasks and other accessory equipment.

Self-adhesive indicators to monitor temperature exceedance and duration, e.g. when transporting temperature-sensitive goods. The indicator reliably indicates whether the temperatures were above the selected temperature limit by red dots. In addition, the indicator provides information on the duration of the temperature exceedance (the time is based on a constant temperature overrun of 2 °C above the limit value of the indicator).

• Selection of different temperatures
• Clear display of temperature exceedances and the duration of the exceedance
• Self-adhesive, easy to apply
• ISO-certified
• Dimensions (W x D x H): 19 x 46 x 1.5 mm

Thermal beads replace water in laboratory baths or ice in ice buckets to prevent contamination. A bath filled with Thermal Beads can be left unattended and is always available at the set temperature without danger of water evaporating to dryness.

• Small, non-uniform metal beads composed of a dry metallic thermal alloy
• Cleaning with biodegradable disinfectant every 2 - 4 weeks only
• Good temperature stability and uniformity
• Energy-efficient
• Minimizes maintenance such as emptying, cleaning, monitoring, and refilling the bath
• Holds common lab vessels in place without accessories such as racks, floats, and weights

Stainless steel, for max. 24 test tubes, 12mm to 17mm diameter, perforated section can be tilted by 90°, with clamping springs for secure grip and silent shaking of tubes.

Inserts to be placed on the shaking tray.

Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.

Stainless steel, 450 x 450 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.

Stainless steel, 420 x 270 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.

Anodised aliminium, 670 x 537mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.

With holes to accept clamps for Erlenmeyer flasks and tube holders.

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.

Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).

For simple and safe reflux reactions without water cooling. Consists of a glass column and a finned aluminium jacket with excellent heat transfer.
Encapsulated thermal fluid is located between the glass column and the jacket to transfer the heat from glass to jacket.

• Ready for immediate use
• Suitable for unattended continuous operation
• Independent from water connections
• Large cooling surface
• Chemical resistant anodised surface
• Can be used with standard laboratory clamps or the Findenser™ attachment kit

The cooling bath liquid is suitable for devices for freezing point determination in milk.

Temperature hoses with special triple insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection.

Temperature hoses with special single insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection.

Temperature hoses with special triple insulation and two connections. The ends are covered with silicone caps for protection.

Water-based heat transfer liquid. Ideal for applications in open temperature control systems for non-flammable liquids. Stabilized against contamination.

Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.

• Chemically inert and environmentally friendly synthetic silicone oil
• Non-corrosive
• Conforms with REACH and RoHs

Heat transfer liquid with high heat capacity. Ideal for applications in open and closed temperature control circuits.

• Water-glycol mixture with very good frost resistance
• Conforms with REACH and RoHs

Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.

• Chemically inert and environmentally friendly synthetic silicone oil
• Low viscosity, for temperatures below 0 °C
• Conforms with REACH and RoHs

Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.

• Chemically inert and environmentally friendly synthetic silicone oil
• Low viscosity, for temperatures below 0 °C
• Conforms with REACH and RoHs

Heat transfer liquid based on silicone oil. Ideal for applications in open and closed temperature control circuits.

• Temperature range for open systems: -95 to 60 °C
• Temperature range for closed systems: -95 to 160 °C
• Chemically inert and environmentally friendly synthetic silicone oil
• Low viscosity, for temperatures below 0 °C
• Non-corrosive
• Conforms with REACH and RoHs

Heat transfer liquid based on polyethylene glycol. Ideal for applications in baths and open temperature control circuits.

• Cold water solubility in measurement and calibration applications
• Conforms with REACH and RoHs

Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.

• Colourless heat transfer liquid enables visual control during tempering
• Chemically inert and environmentally friendly synthetic silicone oil
• Non-corrosive
• Conforms with REACH and RoHs

Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.

• Thermally stabilized, for use at temperatures above 200 °C
• Colourless heat transfer liquid enables visual control during tempering
• Chemically inert and environmentally friendly synthetic silicone oil
• Non-corrosive
• Conforms with REACH and RoHs

Heat transfer liquid based on mineral oil. Ideal for applications in open and closed temperature control circuits, as well as for surface-sensitive applications.

• Temperature range for open systems: 40 to 230 °C
• Temperature range for closed systems: 40 to 300 °C
• Silicone-free medium

Trays made of stainless steel for secure positioning of Erlenmeyer flasks in the shaking water bath.

Heat transfer liquid based on mineral oil. Ideal for applications in closed temperature control circuits and surface-sensitive applications.

• Low viscosity, for temperatures below 0 °C
• Silicone-free medium
• Non-corrosive
• Conforms with REACH and RoHs

Heat transfer liquid based on mineral oil. Ideal for applications in open and closed temperature control circuits.

• Temperature range for open systems: 30 to 200 °C
• Temperature range for closed systems: 30 to 350 °C