Membranfiltre

LABSOLUTE® offers a wide selection of membrane filters for microfiltration. You can choose between several membrane materials, diameters and pore sizes. Usage of membrane filters is recommended both for filtration of air and fluid and is optimally suited in particular for retention of very small particles. Precisely defined micro pores and exceeding stability - this combination makes it a good choice for applications in the microbiological sector, as well as in the pharmaceutical, food and water analysis industry.

Cellulose acetate membranes are characterized by an extraordinary high flow capacity and dimensional stability. The filters have good thermal resistance and can be used in various applications.

• Hydrophilic
• Low protein binding capacity
• Maximum operating temperature: 135 °C
• Non-sterile
• Autoclavable at 121 °C

Accessories Buchner funnels, porcelain Alternative Nitrocellulose membrane filters, white Alternative Nitrocellulose membrane filters, grid pattern Alternative Regenerated cellulose membrane filters, white Alternative Polycarbonate Track Etched (PCTE) membrane filters, white

The uniform pore structure of the LABSOLUTE® nitrocellulose membranes allow high throughput and diffusion rates and guarantee ultrapure and consistent results due to a very low extent of extractables.

• Hydrophilic
• High protein binding capacity
• Maximum operating temperature: 180 °C
• Autoclavable at 121 °C

- Non-sterile

Accessories Buchner funnels, porcelain Alternative Nitrocellulose membrane filters, grid pattern Alternative Cellulose acetate membrane filters, white Alternative Regenerated cellulose membrane filters, white Alternative Polycarbonate Track Etched (PCTE) membrane filters, white

LABSOLUTE® offers a wide selection of membrane filters for microfiltration. You can choose between several membrane materials, diameters and pore sizes. Usage of membrane filters is recommended both for filtration of air and fluid and is optimally suited in particular for retention of very small particles. Precisely defined micro pores and exceeding stability - this combination makes it a good choice for applications in the microbiological sector, as well as in the pharmaceutical, food and water analysis industry.

PCTE membrane filters are produced in a two-step manufacturing process which complies with high quality standards. The membrane consists of a thin PC film with precisely defined pores ensuring ultrapure and consistent filtration results.

• Hydrophilic
• Low protein binding capacity
• Maximum operating temperature: 140 °C
• Non-sterile
• Autoclavable at 121 °C

Accessories Buchner funnels, porcelain Alternative Cellulose acetate membrane filters, white Alternative Nitrocellulose membrane filters, white Alternative Nitrocellulose membrane filters, grid pattern Alternative Regenerated cellulose membrane filters, white

The uniform pore structure of the LABSOLUTE® nitrocellulose membranes allow high throughput and diffusion rates and guarantee ultrapure and consistent results due to a very low extent of extractables.

• Hydrophilic
• High protein binding capacity
• Maximum operating temperature: 180 °C
• Autoclavable at 121 °C

Membranes featuring a grid pattern are ideally suited for determination of colony count, particle analysis and microscopy. Differently coloured filters guarantee a best possible contrast and easy colony counting.

• Sterile and non-sterile

Accessories Buchner funnels, porcelain Alternative Nitrocellulose membrane filters, white Alternative Regenerated cellulose membrane filters, white Alternative Polycarbonate Track Etched (PCTE) membrane filters, white Alternative Cellulose acetate membrane filters, white

LABSOLUTE® offers a wide selection of membrane filters for microfiltration. You can choose between several membrane materials, diameters and pore sizes. Usage of membrane filters is recommended both for filtration of air and fluid and is optimally suited in particular for retention of very small particles. Precisely defined micro pores and exceeding stability - this combination makes it a good choice for applications in the microbiological sector, as well as in the pharmaceutical, food and water analysis industry.

Filters made of regenerated cellulose membrane provide excellent resistance to almost all kinds of organic solvents and high temperatures.

• Hydrophilic
• Low protein binding capacity
• Maximum operating temperature: 134 °C
• Non-sterile
• Autoclavable at 121 °C

Accessories Buchner funnels, porcelain Alternative Cellulose acetate membrane filters, white Alternative Nitrocellulose membrane filters, white Alternative Nitrocellulose membrane filters, grid pattern Alternative Polycarbonate Track Etched (PCTE) membrane filters, white

The membrane filters suitable for use in the Microsart™ e.motion are individually sterile-sealed,without protective paper on top of each filter, in a specially designed individual package on a band. For complete traceability, the membrane filter type, diameter, lot number and a unique serial number are printed on the package of each membrane filter unit. Specially developed pore structures of the 0.45 ìm high Flow membrane filters permit faster filtration based on their high flow rates and throughputs.

All Microsart membrane filters are "multi-fit" and can be used in all standard dispenser systems.

The membrane filters have a diameter of 47 mm or 50 mm, and are white, green or grey with a high-contrast 3.1 mm grid.

Type 111. Resistant to steam sterilisation up to 134 °C, or in dry heat up to 180 °C. Very low adsorption (important when filtering proteinaceous solutions). Suitable for particle removal and ultracleaning of aqueous solutions, methanol, ethanol, high-grade alcohols and residue analysis of fuels and oils. The extractable content of these filters make up <1% of their weight. Other pore sizes and formats available on request.

Alternative Membrane filters type 113, cellulose nitrate Alternative Membrane filters type 111, cellulose acetate, sterile Alternative Membrane filters type 113, cellulose nitrate, sterile

Housing made of PP.

The membrane filters suitable for use in the Microsart™ e.motion are individually sterile-sealed,without protective paper on top of each filter, in a specially designed individual package on a band. For complete traceability, the membrane filter type, diameter, lot number and a unique serial number are printed on the package of each membrane filter unit.

All Microsart membrane filters are "multi-fit" and can be used in all standard dispenser systems.

The membrane filters have a diameter of 47 mm or 50 mm, and are white, green or grey with a high-contrast 3.1 mm grid.

Alternative Membrane Filters Microsart™ e.motion, High Flow

Gray membrane (after wetting, black) with white grid, for detection of yeasts and molds, particle count and microscopy, individually, sterile packaged / non sterile.

Alternative Membrane filters type 138, cellulose nitrate Alternative Membrane filters, type 139, cellulose nitrate Alternative Membrane filters, type 114, cellulose nitrate