Fadpumper

For rapid and clean emptying from cans, drums and small barrels up to 60 l.

• Medium-contacting parts made of PP, PE and FKM
• Precise dosing, without dripping
• Pump connection suitable for 64 mm dia. (BSI) container threads
• Stepless length adjustment of immersion tube
• Threaded adapters for most commercially-sold containers available
• Not suitable for HCl

Accessories Adapter set for Pump-it® container pump Alternative Hand pumps OTAL®, PP

• Delivery tubes made of PP
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• 1.5 m discharge tube, PVC
• Stopcock made of PP/PE

Alternative Hand pumps OTAL®, battery-pumps Alternative Hand pumps OTAL®, stainless steel Alternative Hand pumps OTAL®, PP Alternative Hand pumps OTAL®, PVDF Alternative Hand pumps OTAL®, PP

• Delivery tubes made of PVDF
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• For acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis

Alternative Hand pumps OTAL®, battery-pumps Alternative Hand pumps OTAL®, stainless steel Alternative Hand pumps OTAL®, PP Alternative Hand pumps OTAL®, PP, with tube and stopcock Alternative Hand pumps OTAL®, PP

• Delivery tubes made of PP
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• For weak acids, alkalis and detergents

Alternative Hand pumps OTAL®, battery-pumps Alternative Hand pumps OTAL®, stainless steel Alternative Hand pumps OTAL®, PP, with tube and stopcock Alternative Hand pumps OTAL®, PVDF Alternative Hand pumps OTAL®, PP

Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle.

• Delivery tubes made of PP
• For small containers, up to 10 l
• Universal bungs made of soft PVC, for container openings of 20 – 36 mm
• For weak acids, alkalis and detergents

Accessories Accessories for hand pumps OTAL Alternative Drum pump Pump-it® Alternative Hand pumps OTAL®, battery-pumps Alternative Hand pumps OTAL®, stainless steel Alternative Hand pumps OTAL®, PP Alternative Hand pumps OTAL®, PP, with tube and stopcock Alternative Hand pumps OTAL®, PVDF

Adapter set consisting of:

• 2'' Coarse thread, Mauser, green
• 2'' coarse thread, Tri-Sure^®, brown
• 2'' Fine thread steel drum, blue
• DIN 60, black
• DIN 51, black

Alternative Thread Adapters, PP

When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case.

Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.

• Motor 230 V, 200 W (IP 24)
• Seal less pump tube
• Suitable accessory flow meter required
• Pump with tubing connection

Two options:

• Polypropylene version for acids and alkalis
• Stainless steel version for low-viscosity lubricants

Available as a set (9.880 310-9.880 315) with 1.5 m PVC tubing, nozzle in polypropylene, wall bracket.
Set accessories: Lutz nozzle, 1.5 m PVC hose 3/4", hose connection, hose clamps, wall bracket (for pump B2 Vario PP-SL Ø 32 mm).

Alternative Barrel pumps, PP

The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.

Scope of supply: Drum pump, three bungs in different sizes