Etiketter

LABSOLUTE® labels are self-adhesive and have a size of 26 x 37 mm. They are used to designate your materials using the universally applicable hazard symbols of the GHS system (Globally Harmonized System of classification and labelling of chemicals).

• Made of PE (thickness: 0.1 mm) with additional protective lacquer
• Signal word in four languages (German, English, Danish, Polish)
• Waterproof and solvent-resistant
• Available in handy dispenser boxes

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter 76 mm.

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter 25 mm.

Compilation of the rainbow mix:
7695407: 3 x blue, 3 x green, 3 x orange, 3 x red, 5 x white, 4 x yellow and 3 x pink
7695415: 2 x blue, 2 x green, 2 x orange, 2 x red, 4 x white, 2 x yellow and 2 x pink
7695423: 1 x blue, 2 x green, 1 x orange, 2 x red, 2 x white, 2 x yellow and 2 x pink

The LABSOLUTE® labelling tape dispensers are ideal for organizing the labelling tapes. Single tapes can be replaced without having to remove all tapes.

The LABSOLUTE® labelling tapes can be used from the labelling of test tubes to the colour coding of laboratory utensils. The tapes are easy to label and leave no sticky residue when removed.

Compilation of the rainbow mix:
7695407: 3 x blue, 3 x green, 3 x orange, 3 x red, 5 x white, 4 x yellow und 3 x pink
7695415: 2 x blue, 2 x green, 2 x orange, 2 x red, 4 x white, 2 x yellow und 2 x pink
7695423: 1 x blue, 2 x green, 1 x orange, 2 x red, 2 x white, 2 x yellow und 2 x pink

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter of 25 mm.

Dispenser box of 250 labels. These labels are produced using an extremely resistant 100 µm PE film. Due to their special surface coating they are resistant to most solvents and excellent for indoor or outdoor use. The strong adhesive, although permanent, can be removed from glass containers without leaving any trace.
Trilingual signal word: German, English, French.
Available in 2 sizes.

For labelling and colour coding of laboratory vessels and utensils. Strong and durable. Water resistant. Can withstand temperatures ranging from -23 °C to 121 °C. The tapes are easy to write-on and leave no residue when removed. Rolls of 12.7 m with an inner diameter of 25 mm.

For labelling and colour coding of laboratory vessels and utensils. Strong and durable. Water resistant. Can withstand temperatures ranging from -23 °C to 121 °C. The tapes are easy to write-on and leave no residue when removed. Rolls of 12.7 m with an inner diameter of 25 mm.

Ø 9.5mm. Self-adhesive. Printing protected. For labeling of 0.5 to 2.0ml microtubes that contains potentially hazardous substances. The labels have excellent heat resistance, chemical resistance and UV resistance and a very good adhesion to various materials, even on rough or non-polar surfaces such as on plastics with low surface energy. The material is UL certified. (File MH26760).
1000 labels per roll, in dispensing box.

Power adapter for charging label printers.

The DURAN^® TILT Light Shield is a removable white silicone sleeve that covers 94% of the bottle surface. The sleeve blocks damaging ultraviolet light, protects the glass surface from damage, and facilitates safer handling.

The DURAN^® GL 56 Bottle Tags can be used for individual colour coding or for fixing the light shield to the bottle.

DURAN^® bottle top vacuum filtration units for use with the TILT bottle (using an adaptor) or 45 mm media bottles. Manufactured in a Class 100,000 Cleanroom from Class VI non-cytotoxic materials. Supplied sterile.

Re-usable DURAN^® GL 56 filter adaptor allows the use of the TILT bottle with standard 45 mm bottle top filtration units. Manufactured from inert PTFE.

DURAN^® TILT GL 56 self-adhesive cap labels can be used to clearly indicate the separate bottles of media for each cell line, or types of media.

Manufactured from colored paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions.

Scope of supply:
6 rolls (yellow, blue, green, red, orange, white) of 30 m

White. Manufactured from paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions. Rolls of 30 m.

Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.

Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination does not expand and retract together with temperature fluctuations and therefore always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue.

Self-adhesive labels for hand lettering or print on printing presses. Mounted true to register on sheets with gripper and feeder margin. Each pack contains 2 extra sheets for setting-up operations. Format of the sheets 168 x 120 mm. Length varies in accordance with label size. The sheet sizes and register, however, are absolutely identical for each type. Not suitable for PC printers.

• Made of wood-free paper (75g/qm)
• Chlorine-free bleached, FSC-certified
• Solvent-free adhesive

Strong, brown tape.

tesapack^®4124, transparent.

With brake.

• For one roll Write-On™ adhesive tape
• With epoxy-coated steel writing platform
• Weighted base with non-skid pads prevents sliding or lifting
• 76 mm core fits standard tape rolls up to 25 mm wide and accepts tape rolls having a maximum diameter of 133 mm
• Accepts 36.6 m as well as 54.9 m rolls
• Dimensions (W x D x H): 213 x 87 x 95 mm
• Dimensions of writing platform 102 x 152 mm