Vakuum-tørringsinkubatorer

Accessories Vacuum oven Vacutherm™ VT 6000 P, heated shelves

Accessories Vacuum oven Vacutherm™ VT 6000 P, heated shelves

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.

Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).

For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron^® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.

External dimensions (W x D x H):	480mm x 450mm x 600mm
Internal dimensions (W x D x H):	300mm x 307mm x 275mm
Interior volume:	25L
Usable height above shelf:	120mm
Nominal temperature:	200°C
Ultimate vacuum:	1 x 10-² mbar
Power supply:	230V 50/60Hz
System of protection:	IP 20

Accessories Options for compact vacuum oven Vacutherm™ VT 6025

For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron^® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.
-With stainless steel vacuum ball valve, inert gas connection, overpressure safety and precision valve, seamlessly welded chamber, and DN25 access port

Accessories Options for compact vacuum oven Vacutherm™ VT 6025

For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron^® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.
-With stainless steel vacuum ball valve, inert gas connection, digital pressure display, recorder connection, overpressure safety and precision valve, seamlessly welded chamber, and DN25 access port

Accessories Options for compact vacuum oven Vacutherm™ VT 6025

For the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings.

• With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel
• Silicone door seal
• Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet
• An overheat cut-out (Class 2) is supplied as standard

Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron^® microprocessor temperature controller.

Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm™ 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.

Accessories Accessories for vacuum drying oven 6000 Accessories Accessories for vacuum drying cabinets 6000 Accessories Diaphragm Pumps for Vacuum Ovens Accessories Support frame for Vacuum ovens VT 6130 and CO2 Incubator Heraeus® BBD 6220 Accessories Vacuum pump cabinet Vacucenter 1

For the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings.

• With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel
• Silicone door seal
• Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet
• An overheat cut-out (Class 2) is supplied as standard

Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon^® electronic temperature controller.

Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm™ 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.

Accessories Accessories for vacuum drying cabinets 6000 Accessories Accessories for vacuum drying oven 6000 Accessories Diaphragm Pumps for Vacuum Ovens Accessories Support frame for Vacuum ovens VT 6130 and CO2 Incubator Heraeus® BBD 6220 Accessories Vacuum pump cabinet Vacucenter 1