Kraftmåling

High speed data transfer software for force-time-measurements.
Force measurements can be conducted over a very short period, i.e. seconds. A high speed data transfer to a PC is possible (with a transfer of up to 20 data sets per second) when combining the AFH FAST with FL. AFH FAST shows the results in a Force-Time-Graph and can export the data to MS Excel. Compatible with Microsoft Windows 7/8.1/10 operating systems. Incl. interface cable...

Universal digital force gauges for tension and compression tests with integrated measuring cell.

• Turnable display with backlight
• Digital force gauge with internal sensor
• Data interface RS-232
• Selectable measuring units: N, lb, kg
• Peak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)
• Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard parts
• Auto-Power-Off
• Internal memory for up to 10 measurements
• Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
• Can be mounted on all SAUTER test stands

Robust Push/Pull force gauge for simple measurement.

• Turnable display: automatic direction identification
• Secure operability due to ergonomic design
• Peak-hold function to capture peaks (value is "frozen" for approx. 10 seconds) or Track function mode for a continuous measurement indication
• Selectable measuring units: N, lb, kg, oz
• Auto-Power-Off
• Can be mounted on all SAUTER test stands

Universal digital force gauges with integrated measuring cell.

• Turnable display with backlight
• Can be mounted on all SAUTER test stands
• Metal housing
• Selectable measuring units: N, kN, kg, oz, lb
• Real time or Peak Hold Mode to observe transcients or capture peaks
• Capacity display: A bar lights up to show how much of the measuring range is still available
• Measuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
• Internal memory for up to 500 measurements
• Continuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)

Force-measurement device with external, high-resolution measuring cell for very slight forces or loads in machines and plants.

• High-resolution display
• Peak Hold Mode
• Function to set limits: Input of an upper/lower limit value
• Visual and acoustic signal
• Data interface RS-232
• Rechargeable battery pack
• Suitable for almost all SAUTER test stands

For torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.

• Can be used in both directions of rotation
• Metal housing
• Capacity display: A bar lights up to show how much of the measuring range is still available
• Peak hold mode to capture peaks
• Function to set limits: Input of an upper/lower limit value
• Visual and acoustic signal
• AUTO-OFF function
• Back-lit LCD graphic display
• Internal data memory saves up to 500 measurements
• Memory contents can be transferred to the PC using optional software
• USB and RS 232 data interfaces
• Rubber feet with anti-slip feature

For measuring push and pull forces with peak hold function.

• Dual scale: shows Newton and kg
• Rotatable display unit for an easy calibration of the instrument
• Peak hold function by drag pointer
• Can be mounted on all manual test stands
• Zeroing by a short push of the switch