Magnetiske omrørere med opvarmning, med induktion

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. The caps have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

In this case, caps and septa form an inseparable unit (Ultrabond), which means that even a blunt needle is unable to push the septa into the vial.

These septa are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber.

Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:

Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request.

Clear lacquered caps, so called headspace caps, with a special score line that breaks when the internal pressure reaches 3.0 ± 0.5 bar. The excess pressure is then released, and the risk of the vial exploding can be avoided.

Clear lacquered centre tear-off caps and complete tear-off caps. These caps are available in several colours on request.

Gold lacquered, magnetic crimp caps with 5 mm centre hole to be used with CE HS500/HS800, CTC 500, as well as Fisons HS500 / HS800 instruments.

Gold lacquered, magnetic crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

Red lacquered, magnetic bimetal crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

These septa made of red butyl and grey PTFE are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties. They are 3.0 mm thick and have a hardness of 50° shore A.

Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:

Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request.

Clear lacquered caps, so called headspace caps, with a special score line that breaks when the internal pressure reaches 3.0 ± 0.5 bar. The excess pressure is then released, and the risk of the vial exploding can be avoided.

Clear lacquered centre tear-off caps and complete tear-off caps. These caps are available in several colours on request.

Gold lacquered, magnetic crimp caps with 5 mm centre hole to be used with CE HS500/HS800, CTC 500, as well as Fisons HS500 / HS800 instruments.

Gold lacquered, magnetic crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

Red lacquered, magnetic bimetal crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

Septa made from Viton with a hardness of 70° shore A and a thickness of 1.0 mm have a very high resistance against a wide range of solvents. These septa are highly recommended for use with chlorinated solvents.
Viton septa are not suitable for multiple injections or high injection speeds.

2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged.

Any other combination of vial and seal as a 2in1 KIT available.

The shell vials made of clear or amber first hydrolytic class glass come in a set with transparent PE plugs. The star-shaped diaphragm in the plug facilitates easy penetration.

Shell vials made of plastic are a shatter-proof alternative to glass vials. They also come with a PE plug.

This easy-to-use, inexpensive vial/plug combination is suitable for non-critical analyses, especially in the field of HPLC.

These micro-inserts made of first hydrolytic class glass are suitable for shell vials only.

The micro-inserts made of transparent PP are suitable for

• Short thread vials ND9, with wide opening made of glass or plastic
• Screw neck vials ND10, with wide opening
• Crimp neck vials ND11, with wide opening
• Snap ring vials ND11, with wide opening
• Shell vials, with a nominal volume of 2 ml

This transparent seal is certified for GC/MS and LC/MS applications. It has a thinned penetration area and a diaphragm. There is no bleeding, and the seal is fully inert. Therefore a contamination of the sample is impossible. Nevertheless the screw cap is as easy to penetrate as a normal septum and just as tight.