Solutions for conductivity measurements

For more demanding applications, such as battery filling systems, disinfectants, dosing pumps, pharmaceutical production and chemical processing in the semiconductor industry. The coupling parts are fitted with a valve. When disconnecting the coupling, both sides close tightly. Main components and stop valve made of PP. Unlocking button, springs and pins made of stainless steel 316. Material O-rings: EPDM.

• Unlocking button for one-handed operation
• Integrated connections for short installation lengths and fast installation
• With stop valve
• Sterilizable with gamma rays

Accessories Accessories for General Purpose Couplings PMC, PMC12, PLC und PLC12 Series

Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.

• Motor 230 V, 200 W (IP 24)
• Seal less pump tube
• Suitable accessory flow meter required
• Pump with tubing connection

Two options:

• Polypropylene version for acids and alkalis
• Stainless steel version for low-viscosity lubricants

Available as a set (9.880 310-9.880 315) with 1.5 m PVC tubing, nozzle in polypropylene, wall bracket.
Set accessories: Lutz nozzle, 1.5 m PVC hose 3/4", hose connection, hose clamps, wall bracket (for pump B2 Vario PP-SL Ø 32 mm).

Alternative Barrel pumps, PP

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 500 mm in length but can be trimmed shorter to a desired length. Further tubing lengths available on request.

Tubing assemblies FEP. Dispense tubing has tapered end.

Accessories Hand pumps OTAL®, PP Alternative Drum pump Pump-it®

The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for pumps with discharge tube and discharge hose.

• For drums with 60 to 220 l
• Size storage area: 240 x 240 mm
• Load capacity: 10 kg

• With delivery tubes made of PP/PVC
• For safe filling of car batteries with acid or distilled water
• With tube shutoff valve
• With dosing tip for precise filling

Alternative Hand pumps OTAL®, stainless steel Alternative Hand pumps OTAL®, PP Alternative Hand pumps OTAL®, PP, with tube and stopcock Alternative Hand pumps OTAL®, PVDF Alternative Hand pumps OTAL®, PP

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional foot switch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
Scope of supply: Pump drive, adapter for multi-channel pump heads

MINIPULS 3 tubes for R1, R2, R4 and R8 pump heads
MINIPULS evolution tubes for MF1, MF2 and HF2 pump heads

• Many different inner diameters
• Compatible connectors

The MINIPULS 3 is a rugged peristaltic pump with interchangeable heads for delivering smooth, low pulse flows of biological and chemical fluids in 1, 2, 4, or 8 channel standard flow rate and 2 or 4 channel high flow rate configurations.

Gilson’s MINIPULS Evolution is the brand-new peristaltic pump specifically designed to meet today's customers' laboratory liquid handling needs with its modern design combining great performance, ease-of-use, flexibility and safety.

Complete, for KISS E, CC-E and with baths as indicated. Incl. hose connectors NW 12.

For use with rotarus^® peristaltic pumps.