Drum pumps

For rapid and clean emptying from cans, drums and small barrels up to 60 l.

• Medium-contacting parts made of PP, PE and FKM
• Precise dosing, without dripping
• Pump connection suitable for 64 mm dia. (BSI) container threads
• Stepless length adjustment of immersion tube
• Threaded adapters for most commercially-sold containers available
• Not suitable for HCl

• Delivery tubes made of PP
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• For weak acids, alkalis and detergents

• Delivery tubes made of PP
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• 1.5 m discharge tube, PVC
• Stopcock made of PP/PE

• Delivery tubes made of PVDF
• Universal bungs made of soft PVC, for container openings of 30 – 70 mm
• For acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis

Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle....

• Delivery tubes made of PP
• For small containers, up to 10 l
• Universal bungs made of soft PVC, for container openings of 20 – 36 mm
• For weak acids, alkalis and detergents

When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case....

The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container....

For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).

• Medium-contacting parts made opf stainless steel (1.4301) and PTFE
• For barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depth
• Suitable for steel barrels with R 2'' thread

For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).

• Medium-contacting parts made of stainless steel (1.4301) and PTFE
• For barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depth
• Suitable for steel barrels with R 2'' thread