-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Hotplates
Hotplates C-MAG HP 7/C-MAG HP 10

Made of glass ceramic which offers excellent chemical resistance.
- Fixed safety circuit of 550 °C
- Hot Top indicator: Hot surface warning to prevent burns
- Exact temperature setting via digital display (LED)
- Digital error code display
- Raised control panel for protection against spilt liquids
High-performance hotplates CERAN® A series

With thermostatic temperature control. CERAN ® glass ceramic material is highly resistant to breakage and changes in temperature, free from distortion, permeable to infrared light and highly acid-resistant. Bench-top instrument with built-in controller....
Hotplates, digital HP-200D-S

Maximum temperature 300 °C. Digital setting and control of plate temperature with 1 °C resolution and cast aluminium/silicon alloy top plate. The 300 x 300 mm top plate model has a retort rod mounting at the rear of the housing. With BioCote, silver-based, antimicrobial protection....
High-performance hotplate CERAN®

High-performance CERAN ® glass ceramic hotplate with circular heating area 145 mm diameter and square placement surface made of glass ceramic (175 x 175), stainless steel housing, power controller (adjustable 10% to 100%) and integral temperature monitor....
Hotplate HP-200-AR, analogue

A heated glass ceramic plate mounted in a block of pure PTFE creates a powerful hotplate which is chemically resistant, even to concentrated acids. The separate temperature controller is connected to the hotplate via a 2 metre PTFE coated lead, which allows the hotplate to be located in fume hoods.
...
Hotplates C-MAG HP 4

Made of glass ceramic which offers excellent chemical resistance.
- Fixed safety circuit of 550 °C
- Hot Top indicator: Hot surface warning to prevent burns
- Exact temperature setting via digital display (LED)
- Digital error code display
- Raised control panel for protection against spilt liquids
Hotplates with Performance Control and Thermostatic Controller

For continuous operation. Electric hotplates with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Asbestos free. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7m. With earthed plug for 230V supplies up to 3300W. A 400V 3-phase model is also available....
Laboratory temperature regulators

For monitoring and control of electronic heating equipment, such as heating mantles, heating baths, heating mats, water baths, oil baths etc. Fitted with state of the art control electronics.
- Multi-Display: separate (LED) temperature displays for set and actual values, and for high and low temperature warning and safety functions
- Splashproof, membrane keypad which is easy to use
- Display resolution 0.1°C
- Adjustable control parameters
- PID control
- Connections for control and safety sensors
- Max. switching capacity: 2kW
Magnetic stirrer with infra-red heating SHP-200-IR-L

Using an ultra-efficient, infra-red heater of just 900 W power this hotplate stirrer will boil 1 litre of water over 30 % faster than a conventional ceramic hotplate of 1200 W. Ideal for heating and stirring large volumes of liquid, particularly microbiological media.
- Chemically resistant glass ceramic top plate
- Flashing "Hot" warning light for temperature above 50 °C, mains independent
Power controller, MES 2000 PSI

An alternating current safety controller for variable and no-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc.
Potentiometer scale adjustment and electronic triac switch monitoring. Controller switches irreversibly to dipole in the event of triac switch malfunction and visual and audible alarms operate immediately. This ensures optimum safety....
Precision hotplate, PZ 44

Automatic, precise regulation of temperatures between 20 and 450°C. Digital presetting and temperature display. Three power levels (825W, 1650W and 3300W) can be set and an additional electronic power controller (adjustable 10% to 100 %) is provided. At 825W and 3300 W settings the entire plate surface is heated. At 1650W setting only the right hand side of the plate is heated. As a result of heat conduction, the temperature from the right hand side to the left edge of the plate varies by approx. 40%. Built-in relay allows direct connection of electronic contact thermometers. With solid, flat, low-distortion, cast GG15 alloy. Switching differential ±1K....
Precision hotplates, PZ-series

For continuous operation. Provide extremely accurate, uniform temperatures, even in plate corners and on edges. Polished anodised aluminium heating surface. Microprocessor-controlled temperature controller with temperature setting up to 99.9 in 0.1°C steps, over 99.9 in 1°C steps. Actual temperature displayed continuously. With separate power controller for performance adjustment to the heating requirements from 10 to 100%. Built-in relay allows direct connection of electronic contact thermometers. Adjustable temperature monitor from 50 to 300°C (with PZ 28-1, 30 to 110°C) to prevent excess temperatures....
Serial heating units series KM-R6

LabHEAT
®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with six heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).
...
Triac mains voltage regulator, MES 1000 / MES 2000

Electronic alternating current adjuster for easy control of resistance power equipment such as hotplates, soldering irons, light bulbs, infrared radiators, universal motor speed regulators, stirrers etc. With high rating fuse, 2 pin on/off luminous rocker switch and shielded, fused Schuko socket.
...
Hotplates, analogue, HP-200-C

With glass ceramic top plate. The surface is easy to clean and allows high plate temperatures for faster heating.
- Flashing "Hot" warning light for temperature above 50 °C, mains independent
- Accurate temperature control with LED setting scale
- Compact, space saving design
- Integral fitting for a retort rod
- Can be used with TC-200D digital temperature controller
Hotplates, analogue, HP-200-S

Plate made of robust aluminium-silicon alloy with a thin ceramic coating for added chemical resistance.
- Flashing "Hot" warning light for temperature above 50 °C, mains independent
- Accurate temperature control with LED setting scale
- Compact, space saving design
- Integral fitting for a retort rod
- Can be used with TC-200D digital temperature controller
Einbau-Heizplatten Serie EB-C, CERAN®

Die Baureihe EB-C ist für den Tischeinbau ausgelegt und wird mit Einbauaufhängung geliefert. Das separate Reglergehäuse kann direkt in die Tischzarge eingebaut werden. Elektrische Verbindungen zwischen Regelgehäuse und Heizplatte sind durch einen flexiblen Metallschlauch geschützt. Leitungslänge zwischen Regelgehäuse und Heizgerät 0,65 m....
Heizplatte Cimarec™+

Heizplatte Cimarec™+ bieten ausgezeichnete Sicherheit und Temperaturleistung für Routine-Heizanwendungen im Labor.
- Temperatur in 1 °C-Schritten einstellbar
- Hot Top Warnleuchte wird aktiviert, wenn die Heizplattenoberfläche über 50 °C liegt
- Automatischer Überhitzungsschutz
- Ablesefreundliche LED-Anzeige
- Erhöhtes Display hält auslaufende Flüssigkeiten von der Geräteelektronik fern
Hotplates HP-200D-C
With glass ceramic top plate. The surface is easy to clean and allows high plate temperatures for faster heating.
- Flashing "Hot" warning light for temperature above 50 °C, mains independent
- Digital microprocessor control for accurate temperature control
- Independent safety circuit protects against overheating
Extraction heating mantles HM-200-MP
The multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.
- Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
- 3 support rods with 12.7 mm diameter are included
- Top cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistance
- Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer
- Earth (ground) screen encloses the heater for added safety
- Individual heater cartridges are replaceable
- Neon lights indicate when power is on
Extraction heating mantles with stirring function SHM-200-MP
The multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.
- Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
- 3 support rods with 12.7 mm diameter are included
- Top cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistance
- Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer
- Earth (ground) screen encloses the heater for added safety
- Individual heater cartridges are replaceable
- Neon lights indicate when power is on
Magnetic stirrer SHP-200D-S, digital

With Heating. The compact and stackable magnetic stirrers are equipped with microprocessor-controlled dual thermocouples to ensure accurate temperature regulation and overheating protection.
- Tough aluminium casing for longevity
- Mains-independent warning light for surface temperatures above 50 °C
- Integrated fitting for a retort rod
- Coated with BioCote® antimicrobial protection
Hotplates HP-300-BS/WS//HP-300-BC/WC, digital

Hotplates with accurate temperature control.
- Spill-resistant front control panel with chemically toughened glass for extra resilience
- Hot surface warning light flashes when plate temperature is above 50 °C
- Durable chip-resistant aluminum top plate offers excellent heat transmission, rapid heating, and oven temperature distribution
- Ceramic top plate is chemical resistant and easy to clean, plus the white surface ensures good visibility of colour changes
- With an integral fixing point for a retort rod
- With BioCote, silver-based, antimicrobial protection
Hotplates with power control

For continuous operation. Electric hotplates with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m....
Hotplates HP-400

Hotplates with accurate temperature control. Durable chip-resistant aluminum top plate offers excellent heat transmission for rapid heating and even temperature distribution
- Spill-resistant front control panel with chemically toughened glass for extra resilience
- The set and actual temperature is shown on the display
- Mains-independent warning light for surface temperatures above 50 °C
- Integrated fitting for a retort rod
- Coated with BioCote® antimicrobial protection
Sand bath SD with performance control
For continuous operation. Electrical sand bath with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m with earthed plug....
Serial heating units series KM-R3

LabHEAT
®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with three heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).
...
Magnetic stirrers SHP-200-S, analogue

With Heating. The compact and stackable magnetic stirrers are equipped with microprocessor-controlled dual thermocouples to ensure accurate temperature regulation and overheating protection.
- Tough aluminium casing for longevity
- Mains-independent warning light for surface temperatures above 50 °C
- Integrated fitting for a retort rod
- Coated with BioCote® antimicrobial protection
Flask heaters,upto 750°C,for flask 250-1000 ml
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9645527 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Flask heaters,upto 750°C,for flask 50-250 ml
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9645525 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Holder with bosshead
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9595030 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Hotplate, 230V analoge, aluminium, black
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
4672500 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Serial heaters,upto 600°C, 6x 250 ml KI 16
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9645540 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Serial heaters,upto 750°C, 6 x 250-1000 ml KI 26
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9645546 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Serial heating unit EV 14 4 hot plates, 85 mm ø, upto +425°C, 4 places, 1800 W
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9645530 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Serial heating unit EV 16 6 hot plates, 85 mm ø, upto +425°C, 6 places, 2700 W
Gerhardt
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9645532 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|