Areometers, Hydrometers

Measuring range, graduation: 0.1% vol, with thermometer 0 to +30°C, graduation: 0.5°C, calibrated at 20°C. Filling: blue. Overall length: 380mm

Shot poised. Without thermometer. Reference temperature: +20°C.

DIN 12791 (and BS718). M100 series. Shot poised.
Without thermometer. Reference temperature: +20 °C.

Baumé type. Shot poised. Without thermometer. Reference temperature: +15°C.

Highly transparent. For density measurements using a hydrometer. Hydrometer can be read through the overflow vessel with a completely filled cylinder.

• With spout
• Molded graduations and ring marks at the primary scale points
• Calibrated to contain (IN)
• Hexagonal base with bottom studs

0 to 100% at reference temperature: 20°C.
Without thermometer.

Shot poised. Without thermometer. Reference temperature: +20°C.

For common salt.
Without thermometer.

Hydrometers made of high-quality plastics (polycarbonate).

• Breakage protected (no glass breakage)
• Fully made of resistant polycarbonate (PC)
• High transparency (like glass), easy-to-read scales
• High precision and reproducibility
• Suitable for applications in food, pharmaceutical and cosmetic industries as well as many others
• Measuring units: specific gravity, density, Oechsle, % mass, Brix, saturation, ° Baumé, etc.
• Made in Germany
• Works certificate available on request (option)
• Food safety according to HACCP

Precision hydrometers acc. to ASTM E2995-14 for determination of density for mineral oil, with thermometer "mercury free".
Hydrometer with thermometer, error-limit for density: ± 0,5 kg/m³, with thermometer -20 to +65°C in 1°C, blue filling, error-limit ± 1°C. With works calibration on request. With blue, environmental friendly filling of thermometers. Each item packed in plasic tubes for breakage protection.

Battery acid tester 1.10 to 1.30.
Boxed complete with glass tube, rubber bulb and hydrometer.

Without thermometer.

Density: g/ml at 20 °C. Measuring ranges 0.6 to 1.0 are adjusted for liquids with low surface tension. Measuring ranges 1.0 to 2.0 are adjusted for liquids with medium surface tension.

Dr. Ammer type.
For testing boiler feedwater.
With integral thermometer and temperature correction.
Reference temperature +20°C.

For lime water Ca(OH)₂.
Without thermometer.
Reference temperature: +20°C.

With -10 to +60°C thermometer.
Adjustable.
Reference temperature: +15°C.

Professional digital multiparameter meters for mobile measurement, with 3, 2 or 1 universal measurement channels, wireless preparation, colour graphic display (black/white display for Multi 3510), data logger manually or automatically (timed) and 2 (1 for Multi 3510) waterproof USB interfaces suitable for field use. Easy to clean with a soft brush under water jet.

Multi 3630: The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab^® users. With USB-A and Mini USB-B interface and colour display.
Multi 3620: The Multi 3620 IDS with two universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to a cable or wireless. Documentation of meter and sensor data. User control over MultiLab^® users. With USB-A and Mini USB-B interface and colour display.
Multi 3510: Sequential multi-parameter measurement. All WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors can be connected to the universal channel, either with cable or wireless module. Data transfer to PC with MultiLab^® Importer. With Mini USB-B interface and black/white display.
Multi 3620 IDS: Single meter in a carrying case with Quick Start Guide, CD-ROM and batteries, driver software for USB, cable, power supply
Multi 3620 IDS SET C: Meter in a carrying case with IDS sensors (digital pH sensor SenTix^® 940, digital conductivity cell TetraCon^® 925), QSC Kit, buffer 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM Pro
Multi 3620 IDS SET G: Meter in a large carrying case with IDS sensors (digital pH sensor SenTix^® 940-3, optical sensor FDO^® 925-3, digital conductivity cell TetraCon^® 925-3), QSC Kit, stand, beaker buffer 4 and 7, conductivity standard, CD-ROM, batteries, cable, power supply , arming SM Pro

Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.

Scale ranges from 0° up to 70° Baumé, paper scale with well visible print, shot weighted body, at the bottom pointed end, accuracy ±1 line of scale division, reading below.

Scale 0,300 up to 0,500 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, capilary round, in transparent plastic case. Reading below.

Alcoholmeters with an error limit of ±0.1 % vol. Temperature range from 0 to 30 °C with 0.5 °C graduation and an accuracy of ±1 °C. Blue filling. Packed in square plastic sleeve.

0 to 100 % mas / % Vol at reference temperature: +20°C.
Without thermometer. With DAkkS calibration certificate and 3 checkpoints.
Packed in a square plastic sleeve.

According to E.E. 76/765. Class II, ethanol % vol. Suitable for official testing. Reference temperature: 20 °C. With thermometer.

Density Hydrometers with an error limit of ±0.001 g/cm³.
Packed in a square plastic sleeve.

1) with works calibration certificate
2) with DAkkS calibration certificate
3) with 1 checkpoint
4) with 3 checkpoints

Butter butyrometer according to Roeder‘s weighing method.

Density Hydrometers with an error limit of ±0.005 g/cm³.
Packed in a square plastic sleeve.

Density Hydrometers with an error limit of ±0.010 g/cm³.
Packed in a square plastic sleeve.

Density Hydrometers with an error limit of ±0.001 g/cm³. With thermometer 0 to 35°C in 1°C increments, blue filling, error limit ±2 °C.

Further measuring ranges available on request.

Without thermometer. Reference temperature 20 °C.

Acc. to DIN 12791. Error limit ±0.001 g/cm³.
Packed in a square plastic sleeve.

Reference temperature: 20°C. Without thermometer.

Acc. to DIN 12791. Without thermometer. Reference temperature 20 °C. Total length 190 mm. Error limit ± 0.002 g/cm³. Packed in square plastic sleeve.

Density Hydrometers with an error limit of ±0.005 g/cm³.
Packed in a square plastic sleeve.

Precision hydrometer for determining the specific gravity. Without thermometer. Reference temperature 60/60 °F. Total length 300 mm. Packed in square plastic sleeve.

Without thermometer.

Precision hydrometers acc. to ASTM E2995-14 for determination of density for mineral oil, with thermometer "mercury free".
Hydrometer with thermometer, error-limit for density: ± 0,5 kg/m³, with thermometer -20 to +65°C in 1°C, blue filling, error-limit ± 1°C. With blue, environmental friendly filling of thermometers. Each item packed in plasic tubes for breakage protection.

Casagrande type, acc. to DIN 18123 / BS 1377. Error limit of ±0.0005 g/cm³.
Packed in a square plastic sleeve.

Hydrometer jars made of glass.

Measuring range, graduation 0.0005g/cm³.
Optionally available with official calibration certificate, works certificate or DKD-calibation certificate. Please specify with order.