Accessories for electrical device

Made of PP. Stackable. Supplied in three parts and are easy to assemble. Alphanumeric grid referenced on top tier for easy identification of samples. Can be used in water baths. With large lateral marking area. Autoclavable.

Paddle stirrer for gentle mixing and homogenising of media at low to medium speeds. The paddle creates a tangential flow pattern and causes little turbulence.

Propeller stirrer for mixing and homogenising media at medium to high speeds. The propeller generates an axial flow pattern.

Solid stem, with loop, capillary yellow enameled, graduation resistant against acids and alkalis. Red filling or environmentally friendly blue filling.

Centrifugal stirrer for mixing and homogenising media at medium to high speeds. The blades align themselves during stirring and create a radial flow pattern. Ideal for stirring in vessels with a narrow neck.

9.726 000: Adapter plug with earthing contact from plug with earthing contact and additional earthing socket to British version 13 A, with fine-wire fuse 3, 5 or 13 A ("non rewireable")
9.726 001: One-way plug adapter from plug with additional earthing contact (CEE 7) to plug Swiss version type 12 ("non rewireable")

Each box contains 1000 tips (5 bags of 200 tips) - except for D10 mL (4 bags of 50 tips) and D5000 (3 bags of 334 tips). Bulk packs are sealed with a zipper lock which can easily be opened for quick access to Gilson’s DIAMOND^® Tips and closed using the rapid-sealing strip to prevent contamination and loss of tips.

Outstanding chemical resistance at operating temperatures from -200 to 260 °C, only 50 µm thickness, the sleeves fit like a second skin without adding bulk, without grip collar, simplifying use of joint clips.

For Filtration, SPE, Degassing, Fluid aspiration.

• N 938.50 KT.18 ensures exceptionally fast evacuation by the parallel and in series connection of both pump heads
• PTFE-coated diaphragm is ideal for aggressive/corrosive gases and vapors
• Pump head made from PPS (Polyphenylsulfide), valves made from FFPM (Perfluoro rubber)

Specifications
Connectors for tube: N 816.3 KT.18 / N 816.1.2 KT.18: N 938.50 KT.18:	ID6 mm ID10 mm
Permissible media and ambient temperature:	5 to 40 °C
Flow rate:	Up to 1.8 m³/h
Ultimate vacuum:	Up to 15 mbar abs.
IP code:	IP 20

Accessories Accessories for Vacuum Pumps LABOPORT® / N 920 G Accessories Accessories for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Accessories Silencer for Vacuum Pumps LABOPORT® / N 920 G Accessories Hose connector for Vacuum Pumps LABOPORT® / N 920 G Accessories Fine control valves for Vacuum Pumps LABOPORT® / N 920 G Accessories Hydrophobic pump protection filter for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Alternative Mini-Diaphragm vacuum pumps LABOPORT® N 96, chemically-resistant

For BlueLine pH electrodes, ScienceLine, IoLine and TopLine.
Cable length: 1 m coaxial cable.

• PDF-data logger with display
• Memory size: 60000 measurements
• Usable without software (default settings) (5-minute-interval, without alarm settings)
• Automatic PDF creation
• Free adjustable recording interval (10 seconds to 24 hours
• Max-Min-Display memory (resettable)
• Time marking functions for measuring results
• Movement sensor for shock recording e.g.: door or windows closing
• Battery lifetime approx. 4 years (recording interval >15 minutes)
• Includes wall mount
• Status- and Alarm-LEDs

Free software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.

Specifications
Temperature
Measuring range:	-40 to +70 °C
Accuracy:	0.1 °C
Precision:	±0.5 °C (0 to +60 °C), otherwise ±1.0 °C
Humidity
Measuring range:	0 to 100 % R.H.
Resolution:	0.1% R.H.
Accuracy:	±3 % R.H. (40 to 60 %), ±3.5 % R.H. (20 to 40 % and 60 to 80 %), otherwise ±5 % R.H.
Pressure
Measuring range:	300 to1100 hPa
Accuracy:	0.1 hPa
Precision:	±1 hPa (900 to 1100 hPa), otherwise 0.5 % of end value
Interface: Housing: Power supply:	USB (integr.) Plastic (ABS) 1 x 3,6 Volt Lithium ½ AA
Dimensions: Weight:	91.5 x 42 x 20 mm 70 g

Data logger for monitoring and recording the temperature during storage and transportation of sensitive products. Measurement data can be transferred to a PC via the integrated USB interface. Free LogConnect software for configuration (alarms, interval, changing display settings) or LogGraph2 for convenient graphical and tabular display of measured values, including drag and zoom. Software is available for download.

• Incl. calibration certificate
• Memory for 150000 readings
• Usable without software (pre-programmed 15 minute reading interval)
• Automatic output as PDF file
• Recording interval adjustable (10 seconds to 24 hours)
• Max-Min values in the display (resettable)
• Time marking function during recording (time marker)
• Motion sensor for shock recording e.g. change of location or opening of windows and doors
• Battery life approx. 4 years (with recording interval >15 minutes)
• Incl. wall mount
• Status and alarm LEDs with acoustic signal (buzzer)
• HACCP compliant in accordance with EN 12830
• IP65 waterproof

Scope of supply: Temperature data logger, battery (1/2 AA, 3.6 V), wall mount

Specifications
Measuring range:	-40 ... 70 °C
Accuracy:	0.1 °C
Precision:	±0.5 °C (-10 ... 40 °C), otherwise ±1.0 °C
Interface: Housing:	USB (integr.) Plastic (ABS)
Battery:	1 x 3.6 Volt Lithium 1/2 AA
Dimensions:	91.5 x 42 x 20 mm
Weight:	approx. 70 g

Accessories Digital vertical autoclaves, AES series

Accessories Paper roll for Printers MP-800D / 660-101

Simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.

• Compact and easy-to-use
• Rapid results allow immediate corrective action
• To be used with the dry swabs Clean-Trace™ UXL100, AQT200 and AQF100

Specifications:
O2 partial pressure:	0.0 to 570.0hPa, 0.0 to 427.4mmHg, or 0 to 1200hPa, 0 to 900mmHg
O2 concentration:	0.00 to 25.00mg/l or 0.0 to 70.0mg/l
O2 saturation:	0.0 to 250.0% or 0 to 600%
Accuracy:	± 1.5 ± 0.2mg/l (0 to 25mg/l) or ± 2.5 ± 0.3mg/l (25 to 70mg/l) ± 1 digit
Temperature:	-5.0 to +50.0°C 23.0 to 122.0°F
Accuracy:	± 0.1°C
Abs. air pressure:	500 to 1100hPa
Accuracy:	± 0.5% full scale
Nominal temperature:	25°C
Operating temperature:	0 to 50°C
Storage temperature:	max. 0.25mA
Power consumption:	-20 to 70°C
Auto-Off Function:	0 to 120min

Accessories Dry swabs for Luminometer Clean-Trace™ NG3 / LM1

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.
For taking cross-section samples of powdery or slightly cohesive substances.

• colour: grey RAL 7035
• exhaust air connection (NW75) on top of the cabinet
• adjusting aids to compensate for uneven floor
• large interior height of 1858mm (Model for two 10 litre bottles interior height of 1246mm)
• lead-through points for pipes, sensors etc. in the ceiling of the cabinet
• complete with mounting rails, rolling ramp, bottle retainer with ratchet straps

Approved and safe

• labelling in accordance with EN 14470-2, fire resistance of 90 minutes
• GS approved

White membrane with black grid, for detection of bacteria with dyed media, particle count & microscopy, individually, sterile packaged / non sterile.

Alternative Membrane filters, type 139, cellulose nitrate Alternative Membrane filters type 138, cellulose nitrate Alternative Membrane filters Type 130, cellulose nitrate Alternative Membrane Filters Microsart™ e.motion

For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.

Specifications
Measurement range:	0.02 ppm…saturated
Temperature range:	0…80 °C
Length/Ø:	110 mm/13 mm
Cable length:	1 m

Scope of supply: 3 exchange membrane heads, electrolyte, abrasive foil

Please order cleaning solution separately.

Portable pH meter for field work and laboratories.

• Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks
• Ergonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfaces
• IP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environments

Scope of delivery:
F2-Meter: Meter only
F2-Standard kit: Meter with LE438 sensor
F2-Food kit: Meter with LE427 sensor, carrying case
F2-Field kit: Meter with LE438 sensor, carrying case

Specifications
pH Measuring range: Resolution: Accuracy:	0.00 ... 14.00 0.01 ±0.01
mV Measuring range: Resolution: Accuracy:	-1999…1999 mV 1 mV ± 1 mV
Temperature Compensation:	ATC and MTC
Calibration:	3 points, 4 predefined buffer groups
Memory size:	200 measurements, current calibration
Temperature Measuring range: Resolution: Accuracy:	0 ... 100 °C 0.1 °C ±0.5 °C
Dimensions (W x D x H):	188 x 77 x 33 mm
IP code:	IP 67 (meter + electrode)

The Thermo Scientific™ Finnpipette™ F1 system delivers performance with precision, all in a lightweight design that maximizes user comfort and reduces strain. It's the ideal system for applications using expensive reagents and valuable samples. The Finnpipette F1 now takes pipetting to a whole new level with significant new enhancements::

• Volume adjustment is virtually effortless and silent, also enabling one-handed volume changes for convenience
• Textured adjustment knob provides a feel of confidence when setting volumes. Optional handle strips also enable a firmer grip
• Lower pipetting forces now reduce Repetitive Stress Injury (RSI) even further without compromising results
• 120° adjustable finger rest - for both right- and left-handed operator comfort
• Soft touch tip ejection combined with the softer collar of Finntip Flex tips reduces ejection forces
• Super blow-out: 150% increase in air boost ensures efficient delivery of micro-volumes and prevents capillary action in 50 µL models and below
• Convenient Color-coding: Finnpipettes and Finntips are colorcoded by volume to make it easy toselect the right pipette and tips
• F1 Finnpipetten are certified to meet standards - ISO 9001, ISO 14001 and ISO 13485
• 5-year warranty with online registration

Accessories Pipette stand for single and multichannel microliter pipettes F1 / F2

• PDF-data logger with display
• Memory size: 100.000 measurements
• Usable without software (default settings) (5-minute-interval, without alarm settings)
• Automatic PDF creation
• Movement sensor for shock recording e.g.: door or windows closing
• Free adjustable recording interval: 10 seconds to 24 hours
• Max-Min-Display memory (resettable)
• Time marking functions for measuring results
• Battery lifetime approx. 4 years (recording interval >15 minutes)
• Status- and Alarm-LEDs
• Includes wall mount

Free software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.

Specifications
Temperature
Measuring range:	-40 to +70 °C
Accuracy:	0.1 °C
Precision:	±0.5 °C (0 to +60 °C), otherwise ±1.0 °C
Humidity
Measuring range:	0 to 100 % R.H.
Resolution:	0.1% R.H.
Accuracy:	±3 % R.H. (40 to 60 %), ±3.5 % R.H. (20 to 40 % and 60 to 80 %), otherwise ±5 % R.H.
Interface: Housing:	USB (integr.) Plastic (ABS)
Battery:	1 x 3,6 Volt Lithium ½ AA
Dimensions:	91.5 x 42 x 20 mm
Weight:	approx. 70 g

The optimal design, the arrangement of the operating keys and the adjustable finger rest allow the motorized Transferpette^® electronic to be tailored to the shape of your hand. Optionally, the Transferpette^® can also be charged via the 3-fold charging stand.

• Unscrewable, completely autoclavable (121 °C) pipette shaft
• Motor-driven, to reduce the risk of RSI and imprecision/inaccuracy caused by operator variability
• Five operating modes: Pipetting mode, Reverse pipetting, Mixing, Dispensing, Gel-electrophoresis modes
• Easy Calibration function for rapid adjustment of the unit without tools
• Extremely fast pipetting speed
• NiMH rechargeable battery pack and battery regeneration-mode

Scope of supply:
Transferpette^® electronic, DE-M marking, with performance certificate, battery, silicone grease

Accessories Charging stands for single channel microliter pipettes Transferpette® electronic Accessories Replacement Battery for Single Channel Microliter Pipettes Transferpette® Electronic Accessories Single stands for single channel microliter pipettes Transferpette® Alternative Single channel microliter pipettes, Transferpette® electronic, variable, with power supply Alternative Single channel microliter pipettes, Transferpette® electronic, variable, without power supply