Dry wipes for clean rooms

Sontara ^® MicroPure nonwoven styles (woodpulp/polyester) are engineered for cleanroom use and combine absorbency of a natural fibre with the cleanliness and strength of a synthetic fibre in the same fabric. No binders or chemical treatments are used to manufacture them. The high cleanliness and purity are ensured by low extractable level and ion content as well as extremely low particle generation by the material itself. The fabric styles offer high particle and liquid absorbency due to their cellulose content....

Extremely low particle number and evaporation residues. Laser-cutting techniques minimise the formation of dust and lint on cutting edges. The use of polyester long fibers prevents the generation of lint.

• Knitted, made of 100 % polyester
• Lasercut
• Cleaned with ultrapure water
• Double packed

Good dust suppression and wiping efficiency due to split fiber.

• Knitted made of 87 % polyester / 13 % nylon
• Lasercut
• Double packed
• Weight: 130 g/m²
• Thickness: 360 µm
• Water absorbency: > 195 g/m²
• Clean Pack: Cleanroom clean with ultrapure water

Lower particle count, less evaporation residue, and fewer detected ions. The polyester long fibers and heatcut reduce the generation of lint.

• 100 % Polyester
• Heat cutting
• Double packed
• Weight: 130 g/m²
• Thickness: 540 µm
• Water Absorbency: 330 g/m²
• Clean Pack: Cleanroom cleand with ultrapure water

• 100 % Cupro, very fine cellulose fibers
• adhesive-free
• Solvent resistance
• Quattro folded

Lower particle count, less evaporation residue, and fewer detected ions. The polyester long fibers and heatcut edges reduce the generation of lint.

• 100 % Polyester
• Heat cutting
• Weight: 168 g/m²
• Thickness: 570 µm
• Water Absorbency: 370 g/m²
• Clean Pack: Cleanroom clean with ultrapure water

• Polyester 67%, Nylon 33%
• Heat cutting
• Weight: 210 g/m²

The wipers are packed in Class ISO 4 clean room environment.

• 2-layers structure of polyester fiber
• 100 % Polyester
• Gammasterilized
• Clean Pack: Cleanroom clean with ultrapure water

The polyester long fibers reduce the generation of lint.

• 100 % Polyester
• Laser cutting
• Double packed
• Weight: 120 g/m²± 5 %
• Water absorbency: ≥ 280 ml/m²
• Clean Pack: Cleanroom cleand with ultrapure water

Split fibers ensure a good wiping ability.

• 70 % Polyester / 30 % Nylon
• Heat cutting
• Double packed
• Weight: > 210 g/m²
• Thickness: > 390 µm
• Water absorbency: > 300 g/m²
• Clean Pack: Cleanroom clean with ultrapure water

Split fibers ensure a good wiping ability.

• 75 % Polyester / 25 % Nylon
• Laser cutting
• Double packed
• Weight: > 175 g/m²
• Thickness: > 320 µm
• Water absorbency: > 320 g/m²
• Clean Pack: Cleanroom clean with ultrapure water

Split fibers ensure an good wiping ability.

• Knitted made of 80 % polyester / 20 % nylon
• Heat cut
• Double packed
• Weight: 210 ± 10 g/m²
• Thickness: 410 ± 30 µm
• Water Absorbency: >412.32 g/m²
• Clean Pack: Cleanroom clean with ultrapure water

• PURE-3: 30 % Polyester, 57 % Rayon, 13 % Polyethylen
• AS-3R: 30 % Polyester, 70 % Rayon (Solvent resistance)
• Quattro folded

Bemcot ^® is a fibre fleece made of 100% cellulose, made of cotton recycling material, without chemical additives and binding agents.

• Lint free
• Chemical resistant
• High Absorbency
• High wear resistance
• Sterilization possible by steam
• Easy disposal by incineration, without release of toxic gases

Cleanroom wipes made of nonwoven fabric.

• 30 % polyester / 70 % rayon
• Quattro folded
• Weight: 30 g/m²
• Thickness: 360 µm
• Water absorbency: 226 g/m²

A range of high-performance wiper solutions, suitable for ISO Class 4 or higher cleanroom environments.

• 100% Polypropylene white base sheets
• Dry wiping of critical equipment and surfaces in pharmaceutical
• Acid-, base-, and solvent resistant
• Thermally bonded with no glue or binding and straight
• Knife-cut edges
• Minimises lint

Split fibers ensure a good wiping ability.
Special weaving technique enables to clean surfaces efficiently in all directions

• 70 % Polyester / 30 % Nylon
• Ultrasonic cutting
• Weight: 103 g/m²± 5 %
• Clean Pack: Cleanroom clean with ultrapure water

Containing water-soluble adhesive which improves their wiping performance. Laser cutting....

One-way cleanroom wipes for all smooth surfaces in clean rooms, made of Fleece, Cellulose/Polyester.

• Very high absorbency
• Ensure very low particle emission
• High abrasion resistance
• Weight: 3 g/wipe
• Double packed

One-way cleanroom wipes for all smooth surfaces in clean rooms, made of PE microfiber, double-knitted manufacturing method with hot cut edges.

• High residue-free capacity of particulate and organic contaminants such as dust and oily residues
• For very high sensitive surfaces
• For clean rooms up to class ISO 4
• Weight: 19,5 g/wipe
• Double packed

One-way cleanroom wipes for all smooth surfaces in clean rooms, made of PE/PA microfiber, woven, edges ultrasonically sealed.

• High absorbency
• For clean rooms up to class ISO 4
• High abrasion resistance
• Weight: 9 g/wipe
• Double packed

Reusable microfibre wipe for all smooth surfaces in the cleanroom.

• Streak-free cleaning
• Excellent dust absorption without scratching the surface due to the special knitted structure
• Above average number of washes due to high quality finish
• Non-sterile
• Resistant to the usual cleaning agents and disinfectants on the market